DC 8-70v Battery Capacity & Voltage Tester
HTML-код
- Опубликовано: 9 фев 2025
- •| Please do read the Description for more better understanding about the Instruction |•
How to set mode a Battery Capacity/Voltage Tester
•| Buy Link |•
•Shoppe
~Battery Capacity/Voltage Tester shopee.ph/prod...
•| How to set |•
1. Hold the 'Setting Key' while powering the Tester to enter Battery Setting Mode.
2. Press the 'Setting Key' to select battery type.
3. Press the 'Switch Key' to adjust the battery quantity.
_____________________________________
(I didn't explain this on the Video but I will explain it here)
4. Hold the 'Switch Key' to enter the S1-S5 Selection Mode.
•S1 - Display Percentage/Voltage alternatively for every 2s.
•S2 - Enter Sleep Mode in 10s after the displayed.
•S3 - Turn off/on the Backlight
•S4 - Blank
•S5 - Battery Type Selection
5. Press the 'Setting Key' to select from S1-S5, the press the 'Switch Key to TURN ON OR OFF the selected Function.
6. Power of to save the Settings.
| Music |•
× Ikson - New Day • Ikson - New Day (Vlog ...
Thank you for watching
If you enjoy the video Please Like, Comment and Subscribe
Finally someone explains the settings! My problem now is it won’t show battery percentage. Shows empty battery at 0%. Shows 51V on a 48v system which is fine (new batteries) but won’t show %. How do I fix this?
Did u figure it out??
@@mustafagak2852 yes figured out the setting but it’s still not giving an accurate readout. It fluctuates severely but it give me an idea when at rest or not moving
Thank you for sharing the manual.
Really great video! Thank you so much! This helped me a lot
You're welcome : )
Can’t get set-up I have a 36 volt system 6 6 volt battery’s lead acid what should my settings be, tried P 3 but all I get is 13.1 volt no percentage? What am I doing wrong
Hey is there a way to hook this up to charge controller or inverter. I just bought same one for it. I have a small 300w solar panels and 200 amps of batteries (2). 100amp each. Regular battery monitors are 75 bucks and up on Amazon. So I got this one for 10 bucks. How do you hook this up to a small solar system?
Sir pwede pobayan as car battery motolite tnx po sa reply
Pede naman po ata sir.. kung lead acid battery sya set mo nyo lang po
@@VINInvents sir if 48v10 ah ung baterry ng ebike ko pano eset po ung volts nia??
Those are cool to have and not too expensive
can i use with 20s 72 volt lithium ion battery with this battery...full charge volt 84v..is this meter tolerate this volt?
No sir.. the maximum series of battery is 17 and the maximum voltage that it can handle is 70v
@@VINInvents Thanks.for this valuable information. i subscribe your channel.
Thank you so much 😊
@@evwithchiro7198 you can buy voltmeters that can handle higher voltage 🖖
Please show all functions of this indicator
I didn't know it requires to be set up until after I installed it.
Anyway, I skipped the setup bit (cos maybe the meter and the BMS communicated somehow)
100% @54.6vdc Full Bar....which is normal, so far....:)
(i'll show concern if none of these figure change during the course of discharge)
Shall run it for a while on same charge and see if anything looks "not quite right".
Did the ol' paper and pen bit prior to getting this nifty gauge, and it will be helpful determining the accuracy.
Voltage Check on Multimeter = 54.6vdc
Voltage Check on Voltage Unit = 54.3vdc (i'm not going to whine about .3 diff)
anyway, one of them MUST be correct!. 😂
The reason I am writing this is because the dude make this video showed 4 cells, which is cool, but the problem I realised from then on was I do NOT now how many individual cells there are in my 48V/20AH pack...
Comments +/_ welcome... 🤔🤭🤫
Mick
thks.... i was stuck lol... about to break it.
Backlight always on or off automatically ? Please reply
I put an instruction in the description .. I forgot to include it on the video.. but I explain on how the other function works..
(I didn't explain this on the Video but I will explain it here)
4. Hold the 'Switch Key' to enter the S1-S5 Selection Mode.
•S1 - Display Percentage/Voltage alternatively for every 2s.
•S2 - Enter Sleep Mode in 10s after the displayed.
•S3 - Turn off/on the Backlight
•S4 - Blank
•S5 - Battery Type Selection
Bro ilang volts pra mag working ung digital? Dpat ba 12volts pataas pra gumana sya? Or nagana sya kahit 4.7 volts na output ng tp4056
Ang pag kaka tanda ko ay pede naman ata, mas recommend lang ang higher voltage
Waterproof?
One would think the seller would provide decent instructions.
Lithium battery 48 volt e bike ki me kese install kare?
I do not have the same and it does not turn on, what do I do?
Can it work on 1.2v aa batteries
yes, but no
In this case he should had a setting of L1 for a battery cell series = "4 count" {1 lithium battery series count is - 4 single cells count as 1 unit add}
How do i Set a 36v 30cell Lithium ion battery? L 10 ?
it would be better if the user could set at what voltage 0% and 100% was displayed
paano po ito maset up para sa ebike?
bro how i set mine 12v motocycle battery maintenance free...
Hmm.. set the battery quantity to 1 and lead acid for battery type
@@VINInvents tnk u bro i support ur chneell
@@michaelangeloduaman5048 your welcome and thank you : )
Set P1 FOR LEAD ACID BATTERY 12V
What is the total cost to ship to US?
Look on ebay, about 5 bucks :)
What's price of it
The volt meter will be more accurate than the small $10 meter..
How i could bought it
Price