You are the only who I have found that covered this. I was about to return it. I didn't need to use the adapter. But everything else helped me. Thank you! I will be following you and your journey.
Thank you, Megan! The trick for me that I learned from your video was that the C1 and Record buttons that have to be pressed simultaneously are both on the remote!! I was trying to press the C1 on the remote and the record button on the camera. Worked perfectly following your instructions.
Megan! Thank You, Thank you, Thank you!!!!!!! you saved my life....Took me forever and I still couldn't figure out how to pair these two. Unlike you however I did find a smart and beautiful person to help me pair the remote and now I'm off to the races. Really appreciate people like you who take the time & effort to make life so much easier for millions of us! God Bless.
Thank you so much for this video. The MT-40 manual doesn’t provide enough instructions for my Sony ZV-1. I learn from your video that not only I have to turn on the Bluetooth Settings but also the Bluetooth Rmt Ctrl. With that I don’t have to use the receiver which is a big help. The receiver adds about an inch to ZV-1 and can bump to something and ruin the multi connector which is used for charging, too.
This helped with my PowerShot G7 X Mark III connection as well ! They don’t tell you to hold down both in the instructions or ANYWHERE else🤣 thought I spent all that money for nothing. THANK YOU SO MUCH
Thanks Megan. That was so helpful. I was planning to buy MT-40 bit couldn't find much videos . This helped. Keep vlogging. You have got a beautiful energy. Cheers 🌸
Thanks Megan - even though I have a ZV-1F (with a different menu) you still got me where I needed to be to make the MT-40 pair. You're awesome and pretty adorable as well. Thanks.🙂
thanks Megan... I was like you in the beginning of this video LMFAO! I thought it would work without that other dongle to the multi port but IT WOULD NOT PAIR! Finally it worked so thanks so much for this Boo.
did you turn the 'product showcase' feature ON in the menu of the zv1? That the feature that can seamlessly detect when you hold a product infront of you and switch focus. It looks like it was struggling in this video so Im curious if you have that turned on?
@@meganlobianco oh congratulations! I hope you're getting used to it. Would you consider posting a new video with your updated thoughts ? "My thoughts after X AMOUNT OF TIME with the Sony zv1"
Hello Megan, thanks so much, i have the ZV-1 and the tripod sitting since ages to be connected but couldn’t as i always delayed it after trying once and failed. You are surely a great help. Thanks again !!❤
Hello! Thanks so much for your review. Question, how has the tripod held up after a few weeks? Would you still recommend it? Perhaps create another review after a few weeks or months of use? Thanks again for this video!
They should just fold out! If you want to extend the grip, that requires a little more force (I thought I was going to break mine) but pull apart the section where the camera attaches from the top of the "ulanzi" label on the grip. Sorry if that makes zero sense, but hopefully you get the idea!
The dial to tighten the camera does give if you are running around holding the handle. If you plan to utilize the tripod mostly, it should be fine. If you plan to run around holding the camera, you might want to look into a more durable set up.
Thank you! As long as you are turning it off in between uses, it should last a long time. I have never continuously used the grip for an hours time, but I have gone multiple days of intermediate use without charging.
@@meganlobianco I charged it right away after unboxing. Everything works fine except the power button. The non-stop blinking lights really drive me nuts😂. All I could do was waiting it ran out of battery. I got mine from Aliexpress so I would just have to keep it. Thankfully it is still usable.
You are the only who I have found that covered this. I was about to return it. I didn't need to use the adapter. But everything else helped me. Thank you! I will be following you and your journey.
Great video we have Sony ZV1 and just got the MT40 thank you!
Thanks Megan, nothing in the directions mention pressing the video button. That was the trick and worked perfect.
Thank you, Megan! The trick for me that I learned from your video was that the C1 and Record buttons that have to be pressed simultaneously are both on the remote!! I was trying to press the C1 on the remote and the record button on the camera. Worked perfectly following your instructions.
Megan, THANK YOU SO MUCH, I was going to return this but then I saw your video and IT WORKED!!! THANK YOU SO MUCH!!!
Megan! Thank You, Thank you, Thank you!!!!!!! you saved my life....Took me forever and I still couldn't figure out how to pair these two. Unlike you however I did find a smart and beautiful person to help me pair the remote and now I'm off to the races. Really appreciate people like you who take the time & effort to make life so much easier for millions of us! God Bless.
U do not know how hard it was to find an actual vid that could help me wit this remote 😫🙏🏽🙏🏽🙏🏽💪🏽thank youuuu so much. 🔥
Happy to help! I know the struggle
Thank you so much for this video. The MT-40 manual doesn’t provide enough instructions for my Sony ZV-1. I learn from your video that not only I have to turn on the Bluetooth Settings but also the Bluetooth Rmt Ctrl. With that I don’t have to use the receiver which is a big help. The receiver adds about an inch to ZV-1 and can bump to something and ruin the multi connector which is used for charging, too.
Yay! I'm happy I could help :)
Wait, so this can be used without the receiver?? OMG
Very grateful Megan. If it wasn't for this video, I would not have understood how to set up the MT-40.
SHOUT OUT TO YOU!!! Thank you I almost had it 😂 but I missed the “Bluetooth Remote” part. Thanks again big help!
This helped with my PowerShot G7 X Mark III connection as well ! They don’t tell you to hold down both in the instructions or ANYWHERE else🤣 thought I spent all that money for nothing. THANK YOU SO MUCH
Thanks Megan. That was so helpful. I was planning to buy MT-40 bit couldn't find much videos . This helped. Keep vlogging. You have got a beautiful energy. Cheers 🌸
Thank you for the kind note! I'm happy this video helped you!
Put on the Product showcase mode on for quick focus on product in the ZV 1
Oh great! Thanks for the tip!
Definitely helpful!
Megan, thank you for this video it took me forever trying to figure this out, and you made it so simple!😄
You are an angel 🙏🏽 I could not figure out how to set it up and then boom your video showed up 🎉thank you so much
I was struggling to connect my Sony RX100 VII, your video is very informative. Thanks for sharing.
So happy I could help! I know how frustrated I was with mine, hopefully saved you the headache :)
i can
t thank you enough , it tooks my ages to get it done ,, super megan
Thanks so much!!!!
Thank you! I bought this for may zv 1f and it works! I misplaced the paper, but thanjs to this I was able to connect it.
Thanks Megan - even though I have a ZV-1F (with a different menu) you still got me where I needed to be to make the MT-40 pair. You're awesome and pretty adorable as well. Thanks.🙂
This was helpful to me! Thank you!!
thanks Megan... I was like you in the beginning of this video LMFAO! I thought it would work without that other dongle to the multi port but IT WOULD NOT PAIR! Finally it worked so thanks so much for this Boo.
Thank you so much for this! I took one look at the instructions and dove straight to youtube for help
thx for the video!
What if you don't have the bluetooth multi-port adapter that you stick in the camera? Are just those available on-line?
I needed this tutorial! Thanks
did you turn the 'product showcase' feature ON in the menu of the zv1? That the feature that can seamlessly detect when you hold a product infront of you and switch focus. It looks like it was struggling in this video so Im curious if you have that turned on?
No I did not! At the time of recording, I was very new to the camera, but finally figured it out a few days later. Thank you for the tip!
@@meganlobianco oh congratulations! I hope you're getting used to it. Would you consider posting a new video with your updated thoughts ? "My thoughts after X AMOUNT OF TIME with the Sony zv1"
Thank you, your tutorial worked for me!!
THANK YOU! You saved us. Might never have figured out pairing the remote without your help.
Thank you. I'm 81 from the dial teiphone age. Bless you. You do a a good job. Try some more and make some money
Thanks for the help. Just bought the same one for my ZV-E10.
Hello Megan, thanks so much, i have the ZV-1 and the tripod sitting since ages to be connected but couldn’t as i always delayed it after trying once and failed. You are surely a great help. Thanks again !!❤
You are great! got mine used with no instructions and your video came handy to find how to pair 👍 love your accent
Hello! Thanks so much for your review. Question, how has the tripod held up after a few weeks? Would you still recommend it? Perhaps create another review after a few weeks or months of use? Thanks again for this video!
Great idea! I can give another in depth review, but so far I’ve liked it!
My camera has usb c connector and the grip has micro usb how did you do to connect the Bluetooth adapter?
Thanks! A big help for me!
Yeah you definitely saved me from tearing my dreads out 😮💨 Thank you a ton
Can we set the C1 to manual focus?
Thanks a lot, it helped so much
Is this one working for Sony Zv-1F?
Could you please provide a link to buy it ??
Absolutely! I purchased mine on Amazon amzn.to/3L3CQDP
Thank you for the video.I also have the Same camera
This is really helpful!!!!!!!!!!!!
Thank you very much for your help.
You literally are a life saver for this. Btw, how do you get the tripod legs to come out?
They should just fold out! If you want to extend the grip, that requires a little more force (I thought I was going to break mine) but pull apart the section where the camera attaches from the top of the "ulanzi" label on the grip. Sorry if that makes zero sense, but hopefully you get the idea!
Thank you I was in the same predicament as everyone else here.
Great! That did it. Thank you
Will you recommend this if you have heavier setups? How was the build quality hoding up?
The dial to tighten the camera does give if you are running around holding the handle. If you plan to utilize the tripod mostly, it should be fine. If you plan to run around holding the camera, you might want to look into a more durable set up.
Hi, Megan. After you charge your blue tooth grip, how long does the grip battery last? I am hoping more than 1 hour. By the way your video is great.
Thank you! As long as you are turning it off in between uses, it should last a long time. I have never continuously used the grip for an hours time, but I have gone multiple days of intermediate use without charging.
@@meganlobianco Thank you for reply. Good luck with your channel.
Thank you!
You’re awesome - Thank you this!
Gracias 🤍 New sub
Goat
After wasting an hour….thanks for helping lol
cool page thanks for the vid!
thank you
🐐🐐🐐🐐🐐🐐🐐🐐🐐
Dios te bendiga hoy y siempre
Oop, can't use since I lost the bluetooth port
Omg thank you
QUE BELLA
I just received mine and it is broken. It won't turn off even if it is switched to 📴 and the lights just keep on blinking 🤦♂️
Oh no! I'm sorry to hear it, that never happened to me. Have you tried charging it?
@@meganlobianco I charged it right away after unboxing. Everything works fine except the power button. The non-stop blinking lights really drive me nuts😂. All I could do was waiting it ran out of battery. I got mine from Aliexpress so I would just have to keep it. Thankfully it is still usable.
@@uhf.4910 that would make me lose it as well! sharpie over the light lol
красивая девочка
Jeeezzz that was a lot of useless talking and annoying time wasting before getting to the point
Thank you for this constructive feedback. I will be sure to think of Arvin Awotar the next time I make a video.
@@meganlobianco That's a smart decision 😎
stop the nonsense and show us
Nonsense only 😤
Does it work with ZV E10?
Thank you 🙏🏼