Glad to see another video of yours picking up traction. Hope to see the V2AB Titanium Finish reach over 10k views in the future. As that one is still my favorite from you.
Thanks for watching another video of mine! Encouragement in the comments always gives me strength. And I also really like the V2AB Titanium Finish review because it's the beginning of this channel :)
But There Is Broken On There Wing Is Broken It. Has Gunpla How Do To..... Has Then Fixed....... 😢😢😢😢😢😢😢😢😢😢😢 On The Problem......... 😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😣😣😣😭😭😭😭😭😭😭
Nice job! The tamiya panel liners have a warning if used straight on plastic, that the enamel panel wash will cause the plastic to become brittle and crack. The C30 parts may have gotten panel wash liquid there, and then stuck with the top coat, causing more stress.
Thanks for the compliment and advice. As you say, in the past, other part was split by Tamiya panel liner. If this product often breaks plastic, I think you should use a marker.
@@KatokiHolic spraying with a glossy topcoat before panel lining is a good method, it protects the plastic and helps the panel liner flow smoother, then you can finish with matte
i recommend masking the holes that the joints go into as well or else it will be for naught. Part that broke was either like you mentioned, too much coat which made part very stiff, or you prematurely assembled it too soon after coating it. I found that giving it a couple days until the coat doesn't feel like powder is a good time to handle the parts. However, at the very minimum at least move any joints that were sprayed to prevent it from being stuck in one position too long should suffice while you let it cure. Overall great job though. Love the look. This is actually my plan as well for my wing zero.
Thank you for your advice. Your comments are very right. I wasn't masking the holes, and the flat finish didn't dry enough. The problem was that I wanted to finish it quickly. From the next video, I will make it without making this mistake. Anyway, this kit is very nice. I hope you make it great, too!
@@KatokiHolic i realize now that i took quite a critique approach initially. I’d like to offer some great highlights in your video and the work you put. I believe your videos on your gunpla are unique and set you apart due to the variety of ways of representing the kit. This includes the thumbnail of the video, to the parts unassembled and grouped, its assembly, and finally to its final assembled stage in varying poses. Your music choice fits very well and I personally enjoy a gunpla review with minimal voice interaction.
@@PLA8thRt Thank you very much for your various comments. I'm so glad you recognized the strength of my video. I never expected such comments to be posted on RUclips. I will make a good review that you enjoyed in the next video! Thank you again!
@@추배뱌 음 그 정도면 사용하시는 패널라이너가 이미 묽은 게 아닐까 싶네요. 추가로 에나멜을 넣거나 한 게 아니시면 도료 바닥면에 침전물 없을 때까지 최대한 흔드셔서 사용해 보시는 걸 추천드립니다! 그래도 흐리다면 비슷한 색의 에나멜을 패널라이너에 더 넣으셔야 할 것 같은데, 이건 저도 시도해 본 적이 없어서ㅜㅜ 최후의 수단으로 생각하시면 될 것 같습니다!(혹시 모르니 정크 프라나 남는 부품으로 테스트 하시고요)
do you need any thinner for the gaia color paint? and if yes, does it have to be a lacquer based paint thinner or will any paint thinner work? Excellent video!
I couldn't show it in the video, but I put a little bit of lacquer-based thinner in Gaia color paint. And I added'MR.RETARDER MILD'. www.mr-hobby.com/en/itemDetail.php?iId=160
@@KatokiHolic awesome thank you!:) do you have any other tips for hand painting with Gaia color paints? I can't afford an airbrush system so I'm trying to do the best i can hand painting
@@godjesus3232 The Gaia color paint shown in the video leaves brush marks, so it is important to apply it as soon as possible. In the case of the 'M-5(circular shape)' part, I put a drop of paint in the middle of it and painted it quickly (I failed three times, so I erased and painted again). It is recommended to paint after practicing on the extra parts!
Thanks for this, it helps me to get started on painting while saving up for an airbrusb set. I have read from reddit and other youtube comment from painting tutorial that applying tamiya panel line accent on bare plastic would make the plastic brittle overtime. Is it true?
Yes. one of the parts that I used tamiya panel line accent was cracked T.T (in the making of old mg wing gundam ver.ka) This part wasn't particularly damaged, but it cracked right after tamiya panel line accent application. It happens very occasionally, so I don't think you need to worry too much. If you're worried, it might be better to test it on unused parts from the same manufacturer. And in my case , except for the parts that were cracked at the beginning, the rest are fine even after a long time.
안녕하세요, 가장 마음에 드셨다니 제가 하는 방식대로 최대한 알려드릴게요 ㅋㅋ 우선 니퍼로 런너에서 떼어 낸 후에 손톱깎이로만 다듬습니다! 이렇게 하면 당연히 아트나이프+사포질처럼 완벽하게 런너 자국이 없어지지는 않지만 충분히 깔끔하게 마무리됩니다. 다만 어두운색은 허옇게 자국이 뜨는 경우가 생기는데요, 이런 부분에만 비슷한 색 마커로 툭 툭 찍어주시면 됩니다. 완전 똑같은 색일 필요 없어요. 생각보다 만들고 나면 티가 별로 안 납니다ㅋㅋㅋ mg 뉴건담 버카 촬영만 하고 아직 편집을 못 했는데 ㅠㅠ 하게 되면 이것보단 길게 만들어보겠습니다! 감사합니다!
It is a Decaling quick tray plamokojo.com/archives/product/decalingquicktray I used it for the first time while taking this video and it is very convenient!
@@bren.dinglasan I only coat one layer of spray. For example, I spray the top, bottom, left, right, front, and back of the Gundam body parts at least once so that the finish is applied. Then, make sure that the entire part is moist with spray and dry.
네, 우선 프라모델을 고정해놓을 집게가 필요합니다. 보통 악어집게(악어클립) 이라고 해요. 이걸로 부품별로 잡으시고 스티로폼이나 아이소핑크 두께 좀 있는걸 구하셔서 집게를 꽂아놓으시면 작업하고 말릴 때 편합니다. 그리고 손에 작업용 고무장갑(일회용 고무장갑) 끼고 하시는게 좋습니다. 하다보면 손쪽으로 스프레이가 직접 뿌려질 일이 잦아서요. 그리고 저는 스프레이 부스에서 작업하긴 했는데, 이게 없으시면 그냥 야외에서 하시면 됩니다~
I like to apply a lot of matte finish to make the plastic model feel painted. So the joint parts became too stiff and broken T.T The joint parts should be sprayed properly.
@@yanosiussabtiadi3473 Yes, G parts are made of abs. Regardless of the type of lacquer or enamel, it seems essential to mask the moving parts before applying the finish.
![[GUNPLA] MG WING GUNDAM ZERO EW ver.ka Full-build](http://i.ytimg.com/vi/ULnbCDRwd7A/mqdefault.jpg)
![[GUNPLA] MG WING GUNDAM ZERO EW ver.ka Full-build](/img/tr.png)
Glad to see another video of yours picking up traction. Hope to see the V2AB Titanium Finish reach over 10k views in the future. As that one is still my favorite from you.
Thanks for watching another video of mine! Encouragement in the comments always gives me strength.
And I also really like the V2AB Titanium Finish review because it's the beginning of this channel :)
Wow........
A New Wing Zero Gundam Has Ver. Ka On This Is My Favorite Thing.....
🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉😮😮😮😮😮😮😮😮😮😮😮😮😮😮
But They Still Has Broken On Wings...... 😢😢😢😢😢
You Know Has To Fix It In Problems To Too........
😭😭😭😭😭😭😭😭🤧🤧🤧🤧🤧🤧🤧😣😣😣😭😭😭😭😭😭😭😭😭😭😭😭
But There Is Broken On There Wing Is Broken It.
Has Gunpla How Do To.....
Has Then Fixed.......
😢😢😢😢😢😢😢😢😢😢😢
On The Problem.........
😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😣😣😣😭😭😭😭😭😭😭
I really like the Wing Gundam too :) I didn't make an additional video, but I purchased the broken wing parts separately and replaced them!
Nice job! The tamiya panel liners have a warning if used straight on plastic, that the enamel panel wash will cause the plastic to become brittle and crack. The C30 parts may have gotten panel wash liquid there, and then stuck with the top coat, causing more stress.
Thanks for the compliment and advice.
As you say, in the past, other part was split by Tamiya panel liner. If this product often breaks plastic, I think you should use a marker.
@@KatokiHolic spraying with a glossy topcoat before panel lining is a good method, it protects the plastic and helps the panel liner flow smoother, then you can finish with matte
@@YouSeeGundam Thank you for your advice! I should do it like your advice to protect plastic.
Can't stop watching this.. sooo satisfying
Thank you very much! It's a great kit and the video came out great!
@@KatokiHolic it's okay to directly use gaia color with brush directly from the bottle or you adding some thinner before brushing it?
@@bangunrizky538 I put some lacquer thinner in the Gaia paint bottle and used it. If you don't put in thinner, there will be a lot of brush marks.
i recommend masking the holes that the joints go into as well or else it will be for naught. Part that broke was either like you mentioned, too much coat which made part very stiff, or you prematurely assembled it too soon after coating it. I found that giving it a couple days until the coat doesn't feel like powder is a good time to handle the parts. However, at the very minimum at least move any joints that were sprayed to prevent it from being stuck in one position too long should suffice while you let it cure.
Overall great job though. Love the look. This is actually my plan as well for my wing zero.
Thank you for your advice. Your comments are very right.
I wasn't masking the holes, and the flat finish didn't dry enough. The problem was that I wanted to finish it quickly.
From the next video, I will make it without making this mistake.
Anyway, this kit is very nice. I hope you make it great, too!
@@KatokiHolic i realize now that i took quite a critique approach initially. I’d like to offer some great highlights in your video and the work you put. I believe your videos on your gunpla are unique and set you apart due to the variety of ways of representing the kit. This includes the thumbnail of the video, to the parts unassembled and grouped, its assembly, and finally to its final assembled stage in varying poses. Your music choice fits very well and I personally enjoy a gunpla review with minimal voice interaction.
@@PLA8thRt Thank you very much for your various comments.
I'm so glad you recognized the strength of my video.
I never expected such comments to be posted on RUclips.
I will make a good review that you enjoyed in the next video!
Thank you again!
I really like your vid , pls do more✌🏻✌🏻✌🏻
Thank you! I am preparing the next video. Please wait!
마감 치시는거 보면 정말 따로 하고 싶을만큼 깔끔하십니다
감사합니다~ 무광마감제를 조금 두껍게 뿌린다는 느낌으로 해보시면 됩니다!
Spectacular work on wing Zero, have you built a Mg duel gundam? It will be my first mockup and I want it to be as cool as possible.
Thank you.
I didn't build MG duel gundam. But I know it's a kit with good quality. Make it cool!
제가 찾던 채널입니다
감사합니다! 열심히 영상 업로드 하겠습니다!
뭐지? 뭔가 엄청난 사람을 본거 같에!
과찬이십니다ㅋㅋ 감사합니다!
다음프라모델 하이뉴 버카 조심스레 추천할래요 ㅎㅎ
하이뉴버카는 제가 유튜브를 하기 전에 만들어 놓은게 있어서요ㅋㅋ 제작기가 아닌 완성 리뷰로 시간되면 만들어보겠습니다!
좋은 영상 감사합니다. 혹시 먹선 넣을 때 팁 같은게 있을까요?? 영상과 같이 보라색 먹선을 넣을라 하는데 생각보다 잘 안되고 면봉으로 주변정리 하려고 하면 다 빨아드리더라구요.. ㅠㅠ
패널라인이 깊지 않은 경우 면봉이 다 빨아드리는 경우가 있죠 ㅠㅠ 그럴 땐 조금 귀찮더라도 먹선으로 넣은 도료를 다 말린 다음에 신너를 살짝 묻힌 모형용 정밀 면봉으로 먹선 부분에 닿지 않게 주변만 살살 닦아내는 게 좋습니다!
헉 감사합니다!! 하나만 더 여쭤봐도 될까요..? 영상처럼 먹선을 진하게 넣는 방법이 있을까요? 저는 먹선이 물먹은 것처럼 연하더라구요.
@@추배뱌 음 그 정도면 사용하시는 패널라이너가 이미 묽은 게 아닐까 싶네요. 추가로 에나멜을 넣거나 한 게 아니시면 도료 바닥면에 침전물 없을 때까지 최대한 흔드셔서 사용해 보시는 걸 추천드립니다!
그래도 흐리다면 비슷한 색의 에나멜을 패널라이너에 더 넣으셔야 할 것 같은데, 이건 저도 시도해 본 적이 없어서ㅜㅜ 최후의 수단으로 생각하시면 될 것 같습니다!(혹시 모르니 정크 프라나 남는 부품으로 테스트 하시고요)
@@KatokiHolic 처음 건담에 먹선 넣어보는거라 욕심이 많네요 ㅠㅠ 좋은 정보와 팁을 토대로 열심히 만들어 보겠습니다!!
다음 건담 영상도 기대하고 있겠습니다!!
@@추배뱌 감사합니다! 조금 하시다 보면 본인만의 노하우가 생겨서 쉬워질 겁니다! 재밌게 만드세요!
Wow awesome vid. Spot on!
Thanks! 'Self-destruct'
Great video and very informative
Thank you!
do you need any thinner for the gaia color paint? and if yes, does it have to be a lacquer based paint thinner or will any paint thinner work? Excellent video!
I couldn't show it in the video, but I put a little bit of lacquer-based thinner in Gaia color paint. And I added'MR.RETARDER MILD'.
www.mr-hobby.com/en/itemDetail.php?iId=160
@@KatokiHolic awesome thank you!:) do you have any other tips for hand painting with Gaia color paints? I can't afford an airbrush system so I'm trying to do the best i can hand painting
@@godjesus3232 The Gaia color paint shown in the video leaves brush marks, so it is important to apply it as soon as possible. In the case of the 'M-5(circular shape)' part, I put a drop of paint in the middle of it and painted it quickly (I failed three times, so I erased and painted again). It is recommended to paint after practicing on the extra parts!
Thanks for this, it helps me to get started on painting while saving up for an airbrusb set. I have read from reddit and other youtube comment from painting tutorial that applying tamiya panel line accent on bare plastic would make the plastic brittle overtime. Is it true?
Yes. one of the parts that I used tamiya panel line accent was cracked T.T (in the making of old mg wing gundam ver.ka) This part wasn't particularly damaged, but it cracked right after tamiya panel line accent application. It happens very occasionally, so I don't think you need to worry too much. If you're worried, it might be better to test it on unused parts from the same manufacturer.
And in my case
, except for the parts that were cracked at the beginning, the rest are fine even after a long time.
이제 시작하는 건린이인데 버카 영상중에 가장 마음에 들어 마카랑 먹선팬 그대로 따라샀습니다ㅎㅎ 혹시 게이트 런너 정리하실때는 니퍼+나이프 하시고 사포질까지 해야하나요??
다음 영상은 더 길었으면 좋겠어요ㅠㅠ
안녕하세요, 가장 마음에 드셨다니 제가 하는 방식대로 최대한 알려드릴게요 ㅋㅋ 우선 니퍼로 런너에서 떼어 낸 후에 손톱깎이로만 다듬습니다! 이렇게 하면 당연히 아트나이프+사포질처럼 완벽하게 런너 자국이 없어지지는 않지만 충분히 깔끔하게 마무리됩니다. 다만 어두운색은 허옇게 자국이 뜨는 경우가 생기는데요, 이런 부분에만 비슷한 색 마커로 툭 툭 찍어주시면 됩니다. 완전 똑같은 색일 필요 없어요. 생각보다 만들고 나면 티가 별로 안 납니다ㅋㅋㅋ
mg 뉴건담 버카 촬영만 하고 아직 편집을 못 했는데 ㅠㅠ 하게 되면 이것보단 길게 만들어보겠습니다! 감사합니다!
Was looking forward to this!
Thanks~ I made this kit hard!
혹시 사용하신 옐로우 스프레이 대신으로 비슷한 색상갖는 마커가 있을가요?
건담마커 옐로우 GM08이 이 스프레이 보단 살짝 흐리지만 비슷합니다!
Great job building on the MG wing zero. Btw what that white box you use for the water decal? That look helpful.
It is a Decaling quick tray
plamokojo.com/archives/product/decalingquicktray
I used it for the first time while taking this video and it is very convenient!
피규어같네요 너무 예뻐요
감사합니다~ 무광마감제 강추입니다!
God I always love that matte finish.
I also love the matte finish spray. It makes gunpla cool.
무광 마감제 잘 뿌리셔서 그런지
피규어 느낌이 나네요
감사합니다! 저는 약간 두껍게 뿌린다는 느낌으로 하는데 대부분 피규어 느낌으로 잘 마무리 되는거 같습니다~
카토키님 무광마감재 어떤건 습식데칼을 녹여버린다고 하던데.. 상관없는건가요?? 데칼 붙이고 아무 무광마감재로 뿌려도 괜찮을까요???
저는 주로 반다이 별매 데칼과 프라에 포함된 기본 데칼을 사용하고 마감재는 mr.hobby것만 썼는데 아직까지 마감재로 데칼이 녹은적은 없습니다. 마감재보단 마크세터나 마크소프터를 너무 많이 사용하면 붙이려는 과정 중에 녹아버립니다.
Katoki Holic 아 감사합니다!!!
투명 파츠에 초록색 칠할때 같은 제품 구매했는데 저는 껄쭉해요~ 혹시 뭔가 섞으신건가요? 카토키홀릭님은 굉장히 투명하고 옅게 잘칠해지네요~ㅋ
아 제가 예전부턴 쓰던걸 그냥 써서 그 설명이 빠졌네요. 일반 락카신나와 리타더 마일드를 조금씩 넣어줬습니다! 그럼 도료도 약간 묽어지고 건조 시간도 길어져 붓자국이 덜 남습니다.
@@KatokiHolic 아 그렇군요~ 저는 그냥 칠했어요 ㅋ 너무 뻣뻣해서 신나를 발라서 묽게하려는 시도는 했어요~ 영상 너무 잘보고 있습니다 감사합니다! 아 그리고 나중에 클리어파츠에 유용할거 같은데 대충 몇대몇대몇 비율 정도로 도료를 섞으면 될까요?
@@sbc639 대략 도료 85% 신너 10% 마일드 5% 정도인거 같습니다. 신너를 너무 많이 넣어버리면 도료를 아예 못쓸수 도 있으니 조금씩 섞으면서 원텔라르 님이 딱 원하는 농도를 찾아가보시면 될듯요!
Beautiful❤
Thank you!
데칼+도색 의뢰도 혹시 받으시나요??
죄송하지만 따로 의뢰는 받지 않고 있습니다~
how many cans of uv flat coat you used?
I used two cans of uv flat coat. And the second one was used less than half.
@@KatokiHolic thank you! great work btw! so clean
@@bren.dinglasan Thank you~!
@@KatokiHolic one last question, how many coats/layer you applied?
@@bren.dinglasan
I only coat one layer of spray.
For example, I spray the top, bottom, left, right, front, and back of the Gundam body parts at least once so that the finish is applied.
Then, make sure that the entire part is moist with spray and dry.
영상에 부러진 부분은 어떻게 처리해야할까요?? 어떻게 해결하셨는지 궁금합니다!
둘다 접촉부에 타미야 수지 접착제 쓰고 붙을 때까지 마스킹으로 감싸놨습니다. 다 말린 후 조립하니 멀쩡히 잘 있네요. 다만 가동하면 다시 부러질거 같아서 그대로 두고 있습니다 ㅋㅋㅋㅋ
Damn cool
Thanks dog
마감 칠때 필요한 재료 알려주시면 감사하겠습니다!
네, 우선 프라모델을 고정해놓을 집게가 필요합니다. 보통 악어집게(악어클립) 이라고 해요. 이걸로 부품별로 잡으시고 스티로폼이나 아이소핑크 두께 좀 있는걸 구하셔서 집게를 꽂아놓으시면 작업하고 말릴 때 편합니다. 그리고 손에 작업용 고무장갑(일회용 고무장갑) 끼고 하시는게 좋습니다. 하다보면 손쪽으로 스프레이가 직접 뿌려질 일이 잦아서요. 그리고 저는 스프레이 부스에서 작업하긴 했는데, 이게 없으시면 그냥 야외에서 하시면 됩니다~
먹선은 거의 보라색으로 하신건가여?
네 흰색에는 전부 보라색으로 먹선 넣었습니다~
@@KatokiHolic 와 ~ 멋집니다. 완전 따라 하고 싶네요~ 위 동영상에 나와 있는 부분만 칠하면 똑같이 될수 있을까요? 먹선 브라운 다크 브라운도 어디까지 칠한지 궁금하네요
@@sbc639 아 넵 색상별로 한 부품씩만 보여드린거라 생각하시면 됩니다~
흰색 부품은 전부 보라색 먹선, 관절부분이랑 무기쪽 회색은 브라운, 빨간색은 다크 브라운, 파란색은 회색 리얼터치마커, 노란색은 주황색 리얼터치마커 입니다.
외장에 가려지는 내부프레임만 제외하고 거의다 먹선이 들어갔네요~
Wow. Clap clap clap
Thank you so much!
Anw ,Sprayed too much by what? I was suprised when look part G 30 is broken
I like to apply a lot of matte finish to make the plastic model feel painted. So the joint parts became too stiff and broken T.T The joint parts should be sprayed properly.
@@KatokiHolic oh man.. so, the joint parts better painted by enamel or laquer? The joint is made by ABS right?
@@yanosiussabtiadi3473
Yes, G parts are made of abs.
Regardless of the type of lacquer or enamel, it seems essential to mask the moving parts before applying the finish.
@@KatokiHolic thanks man.. now i'm waiting for my order itself not arrived yet😂😂
@@yanosiussabtiadi3473
It's a very nice kit. Hope to make yours cool!
1:27