Hi! Great work! But, warning!!! Always, always put the bolts from top to bottom where ever possible! Vibrations tend to unscrew the nuts (NEVER TRUST THE NUTS!) and when nut falls down it is important that screw will still stay in place. You will hear that something is wrong (strange sound) and immediately take the action. But if bolts fall off... Imagine yourself... At he bottom coupling you done it correctly but on top coupling you done it wrong. Please, correct this! Do the same as on the bottom coupling.
@@ultralighthelicopter I agree 👍(Advice: look ahead and think about the possibility to assemble parts - over 40 years of experience in mechanical engineering like MSc 😀).
Muchísimas felicidades por este avance significativo o importante, no sabes lo ansioso que estoy de verlo volar ya es más de un año siguiendo tu progreso que la emoción se va haciendo más fuerte en cada episodio, Alfred Hitchcok estaría orgulloso de lo intrigante y misterioso que son estos creo los últimos episodios de esta serie, gracias y ya sube a volar jajajaja un abrazo bye
Неправильно установили эластичную муфту. Так как вы поставили ее быстро порвет. Нужно ставить стрелочками указанными на торце муфты в сторону кронштейна карданного вала так как в ее конструкции силовая часть в вашем случае остается разгружена.
@@ultralighthelicopter You may know. How much power do we need to lift a kilogram? Your engine is 65 your helicopter weight is 236. It mean for every HP you have 3.6 KG.
Hi ! Please turn back to me if you saw this comment ! can you share measurement of it ? I want to make something like this i am not an mechanical enginer because of that i wanted it i don't have cnc machine because of that i can't make mistake if you share with me i like for it thanks .
Waiting for take off
Hadir bos,in indonesia
Hi! Great work!
But, warning!!! Always, always put the bolts from top to bottom where ever possible! Vibrations tend to unscrew the nuts (NEVER TRUST THE NUTS!) and when nut falls down it is important that screw will still stay in place. You will hear that something is wrong (strange sound) and immediately take the action. But if bolts fall off... Imagine yourself...
At he bottom coupling you done it correctly but on top coupling you done it wrong. Please, correct this! Do the same as on the bottom coupling.
Thanks... Unfortunatly i was not able to put the bolts on the upper clutch from top to bottom, because the Main Gearbox is to close.
@@ultralighthelicopter I agree 👍(Advice: look ahead and think about the possibility to assemble parts - over 40 years of experience in mechanical engineering like MSc 😀).
อยากเก่งเหมือนมิสเตอร์ ความไผ่ฟันผมเลย
Getting closer 😀🙏
buen video, ya falta menos, saludos desde chile.
Very good
Show parabéns pelo trabalho que está a conquistar 🇧🇷
Bolts are risky when things are moving. Always put nut check pin.
Ese eje que montante, está descentrado.
Muchísimas felicidades por este avance significativo o importante, no sabes lo ansioso que estoy de verlo volar ya es más de un año siguiendo tu progreso que la emoción se va haciendo más fuerte en cada episodio, Alfred Hitchcok estaría orgulloso de lo intrigante y misterioso que son estos creo los últimos episodios de esta serie, gracias y ya sube a volar jajajaja un abrazo bye
motor'un sesini duysaydık daha güzel olur
Your getting there man.
Excellent !
Great job as always.
Thank you :-)
Love it!!!
Awesome build. Watch that rotorshaft u have a hell of a wobble there
I see wobble in the main rotor shaft and transmission shaft as you spun at the end of the video. Is that much wobble within acceptable limit?
Good !
Oh yeah here we go.
Maybe a spline drive, thrust plate and lose those cross bolts?
Triangle plate of gearbox is very thin... It's will break easily... You should well high gauge triangle plate
Неправильно установили эластичную муфту. Так как вы поставили ее быстро порвет. Нужно ставить стрелочками указанными на торце муфты в сторону кронштейна карданного вала так как в ее конструкции силовая часть в вашем случае остается разгружена.
people dont grow up, only the price of their toys
min 13:55
Верхняя часть не понравилась. Сварочный шов надо убрать ниже отверстия. При затяжке болт на излом идет.
আসসালামুয়ালাইকুম আমি একজন বাংলাদেশী আমার ইচ্ছে একটি বিমান তৈরি করা আমি অনেক দরিদ্র ঘরের একটি ছেলে একটি বিমান তৈরি করতে কত ডলারের প্রয়োজন
How many HP is the Engine?
The Engine has 65 HP
@@ultralighthelicopter
You may know.
How much power do we need to lift a kilogram?
Your engine is 65 your helicopter weight is 236.
It mean for every HP you have 3.6 KG.
It looks nice but I see to many design flaws . This is not how a shaft should be made my friend . Side load of M8 bolts , threaded ?
Hi ! Please turn back to me if you saw this comment ! can you share measurement of it ? I want to make something like this i am not an mechanical enginer because of that i wanted it i don't have cnc machine because of that i can't make mistake if you share with me i like for it thanks .
Very good