@@ChampagneS3 Thanks for the help! I have a 2018 Audi A3 cabriolet so it has the same interior OE lights as your car. Is there a way that I can wire it so it's in sync with the other interior lights that are in the car? I would prefer not running a wire from the engine bay to the cabin hahaha. Thank again for your help!
@@SameerKhan-pz7df sorry not off the top of my head but basically you could use an add a fuse to the fuse box. It'll sllow you to get power to the lights you want to hook up
I have a question for you mate. Do you know where can I find carbon fibre interiors for my Audi A5 sportsback 2017 RHD uk?. Been looking for over a month. Any help would be appreciated. Thank you
Map 6 is for your custom tuning. So it's beneficial to use the best fuel you can to get the most benefit for custom tuning (most power). You would still be able to get custom tuned on map 6 on lower fuel grades but it won't be as beneficial
Hi bro nice mod. I am wondering where did you buy that phone holder that fits on the central climate wents with an S line logo? I found a lot of holders but i want the one with the S line logo. Thanks
I haven't gotten any weird error codes or anything of that sort. As for power drain, nothing that I have noticed. It functions just the same when the oem lights come on so there isn't any excessive drain. It also has a separate remote control if you want to manually shut it down
@@ChampagneS3 Thanks for answering, one last question please :) When it comes to the dashboard, specificly runing the conecting wires from the led's behind the AC controles and switches to the lighter power what is it like? Is it possible once I put the led's on the dash (under the trim) can I remove just the upper switch (drive select, esp buttons etc) and somehow push the conecting wire so it ends up close to the lighter or will it need to dissassemble most of the center consloe (glove box, knee panels) you know so I can get the conecting wire to the lighter, for power? Thanks in advance!
How difficult were those door led trim to install? I’ve been meaning to order those, but some people say there’s some hard wiring required on the passenger and remainder doors?
The ones I have currently are from a different source. I'll be looking to switch over as I do like the QG Custom kit as it looks closer than an oem setup. This door trim pieces I have were plug and play.
Big fan of your videos love how you have everything in detail keep up the work brother 💪was wondering if you can send me the video to connect to power thank you and wish you nothing but positive vibes
@@negative949 its plug and play. It was agreed not show that part of the installation due to people copying the design. Simple as that. I even mention I can share a private video so don't know what the problem is?
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Thanks for the in depth explanation!
Ithought this would be much harder to do, getting my car in 5 days so i'll probably give this a try!
It's a very simple install! Especially if you are only considering doing the dashboard lights. Highly recommended. Let me know if you need any help 👍
Did u do it was it ez?
looks super clean, I'm looking into doing it to my car
Mate you have done a spotless job, keep it up...❤❤❤South Africa
Great vid! The car's looking great! keep the mods coming!
Definitely more to come! Thank you!
I need one for sure
Please send me link where you buy the interior lights from
How did you do the doors I can’t figure out where to put the strips on the doors!!!
Nice vid as always👍👍
looks clean🔥
Hello,
How did you install the door panel lights? Seems it's going to be complicated running the cables. Can you make a video?
Thanks
Sure I can definitely do that. Thanks for the suggestion!
@@ChampagneS3 Thanks,
Looking forward to it...Just sent you a DM on instagram
Amazing video
Thank you 🙏
Love it, great job
Does this also works with Audi A1? They kinda have the same interiour
I can't confirm but it could possibly be very similar. I'd reach out to the seller to confirm
I would like to do that to my car we’re do i get the kit
Is there a way to wire them so they only turn on at night?
Most probably if you tap the power for the headlight projectors (which turn on at night). In theory should work but I haven't tried it myself
@@ChampagneS3 Thanks for the help! I have a 2018 Audi A3 cabriolet so it has the same interior OE lights as your car. Is there a way that I can wire it so it's in sync with the other interior lights that are in the car? I would prefer not running a wire from the engine bay to the cabin hahaha. Thank again for your help!
Does this get powered when the car starts or when lights go on?
Get powered when the lights go on
@@ChampagneS3 do you mind sharing how you did this? did you need a special device?
400 euro for this kit is criminal
@@Ron1nAirsoft wasn't that price originally when I bought it. But I have another option I'm looking into that is more affordable
Do you not need to use the grey on the cigarrte lighter ???
No you don't.
@@ChampagneS3 thanks for replying got 1 more question dose the light turn of when the car is of and turn back on when ignition is On??
@@SameerKhan-pz7df that is correct. It functions with all the OEM lights. So when the car is off and accessory power off, the lights are off.
@@ChampagneS3 thanks for letting me know any chance you know how to wire too am bmw 5series ??
@@SameerKhan-pz7df sorry not off the top of my head but basically you could use an add a fuse to the fuse box. It'll sllow you to get power to the lights you want to hook up
where did you get your interior carbon fiber trim from?
Let’s gooo
🤣🤣💯💯
Install head unit infotainment in centre
Great work! Looking to mod my q2.
Thank you!
I can’t find a place
To put the tubes on the doors
@@ericdias2173 the lights on my door are a completely different kit that I bought. Not anything in this video
Is that a phone holder in between your air vents?
yes it is!
nice! is it easy?
Yes very easy to do. Plug and play into the fuse box
A lil cheesey. I wish the chord was less visible. I wonder if the new s3 led set can be retrofitted
They actually came out with a new design with a thinner fiber optic. Looks really oem
@@ChampagneS3 do you have a link
@@BjWraps he only has his Instagram account. Take a look @qgcustom
Where can I get those carbon trim and console pieces at?
I have a question for you mate. Do you know where can I find carbon fibre interiors for my Audi A5 sportsback 2017 RHD uk?. Been looking for over a month. Any help would be appreciated.
Thank you
Hey I have a question for you..what do you think about running my jb4 on map 6 ..do I have to use 93 actane
Map 6 is for your custom tuning. So it's beneficial to use the best fuel you can to get the most benefit for custom tuning (most power). You would still be able to get custom tuned on map 6 on lower fuel grades but it won't be as beneficial
OK thanks..I'm gonna just go map 3 with 93 actane
Mines are okey when the car is turn off when i turn on car they blink 3 times and won’t work any ideas the car is a3 8p
You probably have it connected incorrect for the power tap. Try another source.
Beautiful ambient lighting on your s3 but where’s the link and price for the lights ? GQ custom has no price for them . Can I find them on Amazon ?
Thanks! Just PM or email them for pricing. I know they do have sales occasionally
@@ChampagneS3 great,thank you
Hi bro nice mod. I am wondering where did you buy that phone holder that fits on the central climate wents with an S line logo? I found a lot of holders but i want the one with the S line logo. Thanks
I actually got it on ebay! Hard to find though I looked everywhere for it
What lights did you use? Can you send a link
The info on where you can buy the product is in the description
Hello, awesome mod really!
Does it affect the car battery at all?
Power drain?
Any power drain error codes on the diagnostic tool?
Kind regards!
I haven't gotten any weird error codes or anything of that sort. As for power drain, nothing that I have noticed. It functions just the same when the oem lights come on so there isn't any excessive drain. It also has a separate remote control if you want to manually shut it down
@@ChampagneS3 Thanks for answering, one last question please :)
When it comes to the dashboard, specificly runing the conecting wires from the led's behind the AC controles and switches to the lighter power what is it like?
Is it possible once I put the led's on the dash (under the trim) can I remove just the upper switch (drive select, esp buttons etc) and somehow push the conecting wire so it ends up close to the lighter or will it need to dissassemble most of the center consloe (glove box, knee panels) you know so I can get the conecting wire to the lighter, for power?
Thanks in advance!
Looks sick!! Is that the acrylic style fibre optic strip or the plastic type ?
I'm not too sure but I'll find out for you
How difficult were those door led trim to install? I’ve been meaning to order those, but some people say there’s some hard wiring required on the passenger and remainder doors?
The ones I have currently are from a different source. I'll be looking to switch over as I do like the QG Custom kit as it looks closer than an oem setup. This door trim pieces I have were plug and play.
@@ChampagneS3 Gotcha! i've been looking at plug and play options too, just wasn't sure if any hardwiring was required.
@@imcryzm just with the console lights for power. I would totally recommend doing the dashboard light kit as that's 100% plug and play
Big fan of your videos love how you have everything in detail keep up the work brother 💪was wondering if you can send me the video to connect to power thank you and wish you nothing but positive vibes
If you have Instagram send me a DM or feel free to email me I can send it to you no worries!
Good explanation but not like orginal
Pomoemu viglyadit kak ponos
looks great but seems confusing and way too much work
It's not too bad, I'd recommend doing just the dashboard lights as that was very simple just plug and play
you not showing how to set up the power supply sketches me out.
I have a video that showcases it
agreed...i wouldn't trust this guy or that company...
@@negative949 its plug and play. It was agreed not show that part of the installation due to people copying the design. Simple as that. I even mention I can share a private video so don't know what the problem is?
To much of a hassle
Pay someone to do it