Are ya able to make a step by step video how to charge a 4500 mah 45C (4 S) 14.8V Lipo battery by using an iMAX B6 80W 6A Lipo battery balance charger………? Thankin’ you in advance sir.
Hello sir. I just wanna say thank you for making such detailed video. Would ya happen to know where I can get spare parts for it….? I’m specifically looking for the OEM Metal Rudder Assembly. Thanking you in advance….
I bought the 14.8v remote control vector 80 pro, but it didn't come with a battery, so I ended up buying the battery and realized that the battery I bought was 11.1v. will you have a problem? Help me!
Hello !! Looking at buying this beast, what's the dimensions of the prop please? Looking a grabbing a metal one 👌👌 thankyou guys 💯 this vid was perfect, so glad I'm goin with this choice and this video to help look after it 😂😂
For some reason my vector Sr80 will run on its own, I turn on the controller and then plug in the battery, it then beeps many times and then starts ripping it full throttle with out me evening pressing anything, does anyone have any tips I can’t seem to figure it out
Just received mine, ( Pro Version) That small white washer on the prop end of driveshaft is completely missing, and the shaft and prop as a result just wobble around in the with absolutely no support from the housing.Very Very disappointed and not sure what to do next
On further inspwction , I do have the white bearing , but being the pro versin it is metal ,however it is not seated in the drive shaft support housing at all! leaving the shaft (oo err) to just wobble about ,the prop shaft installation on the one I have received is awful.
then because of this , when they have tightened everything up they have introduced a definite kink( the we go again) in the nylon tube between back of boat and the support strut ...
also @ Banggood just shipped this from Europe in the retail box ,which has been slashed open by what looks like a knife ,NO outer box or even a plastic bag to protect it!!
However I would like to thank you for this video without which I may have not noticed how much was wrong with this propshaft installation . defo NOT a RTR out of box runner in my case, it looks like the pro version has introduced a few variables compared to the plastic version re prop mount tube angle etc,I would actually say the plastic version is better out of the box .
I own 3 Volantex boats and they are good starter boats to get into the hobby. However the speed claims aren't accurate to the actual speed straight out the box. The paint on the newer models is poor and normally you will find overspray inside the hull and under the hatch. They take a bashing though because of the blow moulded design.
Cheers for this, my brother and I both greased our drive shafts on our sr80 pros today.
This is extremely informative vid on maintenance of this boat Thank You👍👍💙
Awesome video, thnx for sharing! 🤙🏽
Are ya able to make a step by step video how to charge a 4500 mah 45C (4 S) 14.8V Lipo battery by using an iMAX B6 80W 6A Lipo battery balance charger………?
Thankin’ you in advance sir.
Great run down video mate!
Dziękuję i pozdrawiam z Polski ☺🙋♂️👍
Nice video , nice 👍 boat as well
Could you post some videos of it running please fella 👌🤞
Hello sir. I just wanna say thank you for making such detailed video. Would ya happen to know where I can get spare parts for it….? I’m specifically looking for the OEM Metal Rudder Assembly. Thanking you in advance….
Which boat do you like better the pro version or this one, thanks for your input I'm getting ready to purchase the pro version.
I got a pro version and dont know how to fix a propeller shaft seem to push a little bit out and not in place.
Oil?
I bought the 14.8v remote control vector 80 pro, but it didn't come with a battery, so I ended up buying the battery and realized that the battery I bought was 11.1v. will you have a problem? Help me!
Hi nik, what type of batt connector does this boat use?
Hi Nik, any water issue with you boat after playing it for a while? Thanks
Reverse throttle available?
Hello !! Looking at buying this beast, what's the dimensions of the prop please? Looking a grabbing a metal one 👌👌 thankyou guys 💯 this vid was perfect, so glad I'm goin with this choice and this video to help look after it 😂😂
This rc boat reverse throttle available?
hi do you know how i can calibrate the esc of this boat on another receiver? i have a flysky 3ch receiver thanks
For some reason my vector Sr80 will run on its own, I turn on the controller and then plug in the battery, it then beeps many times and then starts ripping it full throttle with out me evening pressing anything, does anyone have any tips I can’t seem to figure it out
I can't find the neutral point
Just received mine, ( Pro Version)
That small white washer on the prop end of driveshaft is completely missing, and the shaft and prop as a result just wobble around in the with absolutely no support from the housing.Very Very disappointed and not sure what to do next
Also a lot more of the inner white prop shaft liner protruding at the motor end of the shaft ?
On further inspwction , I do have the white bearing , but being the pro versin it is metal ,however it is not seated in the drive shaft support housing at all! leaving the shaft (oo err) to just wobble about ,the prop shaft installation on the one I have received is awful.
then because of this , when they have tightened everything up they have introduced a definite kink( the we go again) in the nylon tube between back of boat and the support strut ...
also @ Banggood just shipped this from Europe in the retail box ,which has been slashed open by what looks like a knife ,NO outer box or even a plastic bag to protect it!!
However I would like to thank you for this video without which I may have not noticed how much was wrong with this propshaft installation .
defo NOT a RTR out of box runner in my case, it looks like the pro version has introduced a few variables compared to the plastic version re prop mount tube angle etc,I would actually say the plastic version is better out of the box .
I own 3 Volantex boats and they are good starter boats to get into the hobby. However the speed claims aren't accurate to the actual speed straight out the box. The paint on the newer models is poor and normally you will find overspray inside the hull and under the hatch. They take a bashing though because of the blow moulded design.
What boat do you recommend sir?
I bought a regular sr80 and a pro
Banggood sucks at warranty and won't even help out with a defective product
Does this have reverse?
Looking at some other videos I don't think is has
@@wingsy16 Ran it today and it is fast, but no reverse.