PDW Razor Caliburn Blaster Review and Mod
HTML-код
- Опубликовано: 11 сен 2024
- PDW Razor Caliburn Blaster Review and Mod
The PDW Razor, it could have been so much more... a whole other blaster!
Thank you to Biu-Blaster for send this PDW Razor my way
biu-blaster.co...
A huge THANK YOU to @vanchew.wang on Artstation for such an incredible design.
Please leave a Like and Comment,
Subscribe for more content.
Don't forget to hit that bell to stay informed on my latest video!
You can always follow me on:
Instagram
/ thatoldnerfguy
Facebook
/ thatoldnerfguy
#nerf #nerfgun #pdw #razor #caliburn
I agree 100% this blaster has SO MUCH potential! I didn't see any considerable bumps in performance until I swapped 100% of the O-Rings and Spring. I like your aftermarket barrel though!
More to come... I'll try to fit a Caliburn metal plunger in, give it a good paint job and some hand made wood panels on the side(where the side picatinny were meant to be) and wood pump grip(modeled after the Trion one). I haven't changed spring yet...This blaster just need a good seal and way more barrel
@@thatoldnerfguy I think it has too much barrel even stock. But better sealing might help for sure!
@@notnuffnerf Nope... With that size of plunger tube and travel, it's asking for more. The Stock barrel is too loose, creating seal issue with the dart(whatever oring you put on the pusher), therefore friction/loss of pressure and accuracy. Little math confirm that even on stock spring it needs more. I mean Harrier is best tune at 450 whatever the spring(for most play)....This is Caliburn size, it needs more
@@thatoldnerfguy it’s probably engineered this way on purpose due to laws in Asia. I put a 1.6mm x 300mm spring and full o-ring swap and it only went up to 175fps, so it makes sense the barrel is the culprit. Good observation. Barrel is probably next upgrade on my list.
@@notnuffnerf tbh...mine shoot harder than that...on stock spring.
Thats some very random trivia though - i had no idea one guy was behind like every modern blaster design coming out of china (regardless of manufacturer). That guy has some serious talent!
Vanchew's Design are AWESOME!! I think he's also know as Bench King too
I most likely will never own this blaster or anything like it, but i enjoy watching your videos. Thank you and take care.
Thanks man!!
You know i already got one as we talked about my seal issues. So far i just need to get a better plunger tube. Maybe a metal at some point. This should fix the rest of my seal issues. I love it im a sucker for metal unfortunately so i buy them regardless.
I feel you, this one got great potential...I personally don't have issue with the PT(very thick and slick), but maybe metal at some point, but since the original ZWQ S300 was intended to show a metal plunger through a PC plunger Tube, I'll keep it that way for a bit.
@@thatoldnerfguy mine is this to just wasn't bored out right. Where the pusher goes in its so tight i cant put a different oring to help with the seal and im losing air there. The rest of it is good. Haven't measured it to see if there iss a difference but the way it acts tells me there it.
Thanks
Welcome
Hi?
Hi
What can I get for that money ?
Seagull, Harrier, Baize, War Saint....there is a tons of possibilities, depend what you look for. Don't forget that this is basically a (really nice) Caliburn. 180USD can buy a lot of blaster...or a full loadout
@@thatoldnerfguy Xshot 2.0 wich is green mag or cylinder fed ... MMiamm