CUTTING UP A PERFECT NEW CAR! 1965 MUSTANG CHASSIS SWAP! Part 6! KUSTOM HOT RAT ROD MODERN BUILD!
HTML-код
- Опубликовано: 13 сен 2024
- #RATROD #CASEYSCUSTOMS #HOTROD #MUSTANG
In this video i get the 1965 mustangs front bumper put on, also the front apron and the original cowl section! It’s really starting to look like a car again! Part 6!
I Finally got a P.0. Box! Send me mail, stickers, merch, anything! If enough shows up I will open it on camera! Thanks!!!
Caseyscustoms
P.O. Box 819
St.Joseph MO 64502
Stay tuned for more vids!
If you like this vid please like, share and subscribe!
It means a lot and helps the channel grow!
Also check me out on Facebook, Instagram and tiktok! 👇👇👇
/ caseyscustoms
www.instagram....
vm.tiktok.com/...
Loving this build more and more, great work Casey and Casey's dad.
New hashtag #letscutsomeshit 😉😂😂😂
Congrats on the new sponsor🤙
I like that hashtag
@@CaseysCustoms New stickers ?
defo on my list to do , i love chopping up perfectly good cars and making a new car .. crack on !
The valance, bumper, cowl & hood really close the car in. Looking more and more like a 60’s era Mustang every day. I like your idea of just pinning the hood, there really isn’t any room for those hood hinges anyway. Hopefully the windshield doesn’t become a major issue. Congratulations on the Harbor Freight sponsorship, hard work pays dividends.
casey your the doctor of cars your ausome dude you have a gift when it comes to cars
This body swop has more gappy moments than any other .Well done Casey
Congrats on the Harbor Freight partnership! You deserve it!
Thank you!
I love the way you’re going to use sheet metal to make parts work. You make me want to buy a high mileage 5.0 and body swap a 67’ on it. I need to learn to weld! You’re inspiring
To have your pop’s help you on a build is an honor and a blessing. Enjoy making those memories dude 👍🙌
Thank you, i try and keep that in mind as much as possible
I can’t stop watching this series! Casey, this is really a brilliant build!
Boy... the front looks absolutely awesome.
awesome content as always! grettings from Argentina!
Always cool when the project starts to look less like a project and more like a car!
Always nice to get body panels on. Helps motivate you to keep pushing. #itsjustsheetmetal
It looks amazing!!! TWO THUMBS UP ALL THE WAY!!!!!!
Very Cool that Harbor Freight sponsors you ! 🇺🇸👌👌
This car needs to be at the PITS 2023 (Ponies In The Smokies). Bitchen ride!
Looks awesome. Coming along nicely.
Nothing but progress.... lovin' it
It’s looking good, I like the approach you’re taking re: body fitment. Congratulations on the sponsorships, too.
Thank you very much!
Man, that thing is coming together! It's gonna be a head turner for sure!
I never thought I'd be so into a mustang.. haha this thing is sweet
Lovin' the mustang build can't wait to see fab on fenders so doors line up
Love how that thing's going together!
It's looking amazing. You made this one look easy. ✌️ 🖖
As a 65 owner, I was yelling at the screen telling you what the names and locations of things were. lol. Looking good!
always love your builds
Thank you very mcuh sir!
You got best content
Thank you!
Gotta agree, I love this build!
It’s looking great Casey. I really do enjoy videos. Keep up the good work!!!
I love my mustang Tuesday’s!
Back in the good old 80's. There was a cartoon call pole position. They had a red car similar to a mustang. It had a traga top. I think your car would look good with a targa top.
Mustang coming along nicely Casey. Like the new intro too!
Looks like its coming right along , what a fun build and congrats on ur new partnership!!
Casey... you the man. Motivation, learning, and entertainment 👌✌ Much love from New Zealand.
Thank you very mcuh
It is coming together really well. A lot of people don't realize just how much work goes into fabrication when you are putting a car like this together. Great work on this Mustang. I can't wait to see how it all turns out and to see it with the Coyote engine in it. I may have to see it you get it out in person some time. That would be great. Keep up the hustle on it and your other work. You have such a solid work ethic for your business. It is also great to see how your channel is growing as well. Have a blessed week.
It’s coming out badass ! I’m having to catch up a lot been really sick ! Thank you helping me also again I hope you remember lol but it’s coming out nice ! Good work man ! 👍👍👍💪💪
Great work man! That’s for the updates.
Looking good.I have been around early stangs my whole life. When you are done the stock late model suspension is miles ahead of my 67 coupe. Mine has a real hi-po 289 ci engine .4speed and 3:89 posi. However I wish I had a modern suspension under mine.
Literally sunday and tuesday are my favorite days. Its comi ng along man looks great. Cant wait for the airbags and coyote going in
Excellent work, artist!
Thanks for sharing this build and answering my question on the reason for the front of the door gap. My takeaway from that is the front of the body is wider than it originally was because you couldn’t cut any more out of the new body because it would destroy the dash. Hope I’m understanding that right. I really like your enthusiasm and motivation. Keep the videos coming. 👊😎👍🇺🇸
Hey Casey, to fill the big rocker panel that you don't like, why don't you install side exhaust pipes. Besides hiding the rocker panels it would give it a really cool & tough look!
Hey my man I think that car is looking good I think when you finished it going to be off the change so don't worry about people that don't know nothing about building cars or painting cars and stuff like that because they don't know they just don't know I think you're doing an awesome job and you got a lot to go and man I can't wait to see the next video
Gonna look awesome
Looking good Casey!
cant wait to see this done awsome work
I see where you stated you wanted to cut the top of the fender and extend it. I was gonna suggest to make it a wide body by modding the fender and where it meets the door, have a large side air scoop exit with the center body lines. Also do the same thing to the rear quarters. Cut them at the top and extend them to make it a wide body and you can put a large side scoop as and entrance at the body lines.
Should do the Shelby style lower valance. Hell while your cutting it up get a fastback roof and make a gt350 clone. Keep up the good work holmes
Lookin awesome man moving forward I like it
Damn nothing fetch way better and I would have figured
Really looking good fella
Amazing job
Chop the wheel well out the boot, make a fake fuel cell drop tank to mount all the compressors,etc in
Looking good there 😉
Slammin my friend! It does look like its almost there! Still far to go tho 😉👍
Lovin the build! Can’t wait to see it laid out, Nice job! 👍🏼 💪🏼
Really nice!
Awesome content I’m excited for you buddy lol like these videos
Looking sweet
You mean a Tang wreak. Lookin good Kid
Keep hammering 👍
Sweet!
It’s really looking good bud
Looking good!
I’m so jealous 😍
Great work man, This is turning into quite the quality build! When you said airbags I suddenly saw a vision of it complete. Would look really nice painted and everything on bags and the right wheels. Can't wait to see the finished project!
Thank you! She’s moving along nicely
Dang Casey, she is looking Bad Azz! I guess that right now you could say she's a Doublestang and soon to have the heart of a Coyote. Hmm? 🤔 what to name her, hmm? 🤔
Oh yeah, Woo-Hoo, Harbor Freight to the rescue! That is purdy flippin' neat that they sent you a ton of stuff!
And you're right about those Jack stands being that tall, they would come in really handy. Congratulations my friend. Have a great day!
Lets gooooo 🚙
Coming along nicely! Have you thought about using dynacorn sheet metal and piecing it together instead of using a donor body? Would be quite a bit more expensive but would save a ton of time and be considerably easier.
Not saying I know better. I’ve talked to a few different people who have done this and they said that’s the easiest way. Another guy said he took a body and cut it right down the middle then mounted it and added a couple of inches of metal to fill in the gap from back to front. I’m wanting to do this in the future so I’ve been doing some research in the mean time.
Looks good
If I lived where you do I would love to come do some fab/metal work on that sucker lol.
I’m enjoying both the Mustang and Panzer builds. Excellent work at “making it fit”. “Let’s cut some sh_t” seems so appropriate…..🖖🏼👽
totally hindsight now. but it might have been cheaper to fab a custom frame with kmembers and full link suspension, with the coyote drive train. and then put the 65 body on that
Another awesome video as usual Casey! She's going to be one badass set of wheels when you get her done. I so much enjoy watching your channel. The shit you do just blows my mind bro. Always makes me look forward to the next video. Keep on Motoring brother! I love your channel man. I always watch the videos twice just so I know I didn't miss anything. Keep On Keeping On Casey! 👍🏻👍🏻👍🏻
You could hide those rockers behind lake pipes
So excited now let's cut some shite
8:25 it’s called a radiator support
Thoughts on the windshield: what about bringing the frame in and up like the flush mount guys do?
And yes congrats on more sponsorships man starting to catch some traction
😀
Should've made it from all black parts , they seem to fit together better
Basically will be by the end lol
Casey, great channel and cool build. Did anyone ever tell you you kind of look like Mike from Monsters Inc ? In a good way of course.
Too bad your not closer to Michigan. I have a really nice extra deck lid for one
I have a 69 coupe that I’m contemplating body swapping
I want a Casey's Custom, shirt that says "let's cut some shit".....
Check merch he has wild and mild style
👍
Dad's in the shop good times did you tell him about the heater yet?
He watched the video… 😬😬
Pie cut.the spare tire area
0:05 Was that blinker fluid?🤣🤣😂😂😂😂🤣🤣
Will your cowell vent still work for vent & rain runoff?
Hello I lebaro Venezuela is good you car
Where did you find the front end parts like the front end clip
where do you get the bumpers, i need front and back bumper for 1976 el camino
Why not do a suicide hood flip with a linear actuator?
👍🏻🍺
Right On! But what type of fuel? Heehee, human consumption or mechanical consumption? Haha!✌️
@@gordonstroup882 Either one lol
Looking soo good and not like dogsh!t lol . It's come a long way baby . Still waiting on that 51 lol . Sorry if I'm annoying lol
First
Hey Casey is your dad the reason you got into building cars?
No pins look way cleaner with out
I want to do something stupid and take a crappy econobox like a Prius and swap an old car body on it. And have a super efficient old car that can annoy people. I just think it would be kinda funny
I did it with a Lexus like a decade ago. I would do burnouts and it was front wheel drive and some guys Fucking hated it lol