Thanks. And a simple upgrade on the hinges, I switched to a "Lift off" style stainless steel hinge. They have a male/ female coupling system. No bolt to remove or lose. Just simply lifts off in a second
I appreciate it! Actually upgraded to a lift off style stainless hinge. Now it lifts off in 2 seconds, I just lift up the door and it comes off. Top half of hinge is a male fitting, the bottom is a female.
Pretty easy I replaced those door pins with stainless "Lift off" pins, now I just lift the door off and set it in the garage, literally takes 2 seconds
Thank you. I'm still making amendments to them. I added an angled plate to utilize the seat belt mounting bolts above the mirror mounts to add strength. I'm also going to revisit my latch mechanism, just to simplify it.
I agree: great job and the oem doors/half doors are stupid expensive! More than I will ever pay. I have a crew so, it's gonna be a challenge but you gave me motivation to do what I had been thinking about...lol
Thanks. I actually switched to a stainless steel lift off style hinge. Works awesome, it's a male/ female type. No pin to pull, just lifts off in a second and done
Looks great you did a nice job possibly for the insides you could use that that pipe insulation to wrap around the conduit and to fill the gap on the drivers side.
Great build! I have a Kawasaki Teryx 4 and I don’t feel like spending three to $5000 for doors. I’m definitely running with your idea bro thank you so much for posting this!
Look into stainless steel "Lift off" hinges. I switched to that, no pins to pull. Good luck and I totally agree with the crazy prices they want for these "stamped"out doors.
Thanks man, yeah I'm very happy. Refining them here and there to make fabrication easier to duplicate. For example a better hinge style, (I love how easy they are to remove for around the house), and a better latching system. The cost (without labor) might go up around $150 per door, but the time I'll save will be worth it. Then might put them up for sale. I've had several (over 20) inquires, so I thought let's give er a try.
You did a really good job making those doors for your utv, and I see they fit perfect. If it will rattle while driving, then you could put rubber around it for both sealing and remove rattle sounds. But it will keep a lot of dust outside cabin while driving I guess.
Thanks and I will definitely do videos while I ride. They're very quiet, I have rubber foam tape on the one place they rub. My old side by side was notorious for dust, like most are, because of the opening by the foot well behind the front tire. Time will tell but they already beat those nets all to hell
@@ironheadbiker I did at first commenting before I was finished watching your video, and I heard you did mention while riding that you was already talking about rubber seal. But I think theese doors will work great, so much better than the net doors that doesn't do anything good regarding dust and cover.
good job and they are NOT suicide doors . the trim you were having problem with ,all you have to do is cut a v notch in both sides of the trim were it turns , the v notch should almost be cut all the way through so when you bend the trim it form a miter joint like a picture frame. AND for poor old GENERAL your dog you can a window opening in the door and put a piece of pexiglass for the window, and if your afraid of getting it all scraped up put a piece of wire mesh sandwiched between the door and pexiglass
The suicide doors I was referring to, are the ones Superatv sells. They hinge at the rear. I'm not a fan of those. I changed my hinges to the stainless lift off hinges. No pin to pull (they're a male/ female connection) and they literally come off in 2 seconds. Great tip on the notching the trim. I appreciate it.
Absolutely Impressed. With the doors, your channel, your machine. I just came across your videos the other day. Lmk if you start selling then because I would buy a set off you. Only thing I think needs some improvement is the hood latch how you have to lift and hook the door. Why not just put a pin and breakaway latch similar to the superatv doors? Other than that they seem to hold up beautifully and They are sleek and very nice. Keep the videos rollin man. Great Job
The big thing is wanted to remove them easily. I now changed the design where it's a lift off hinge like a jeep. No pin just lift up and they're off. I work around the house a lot and the doors is a pain in the ass when I'm getting in and out all the time. Thanks for the kind words and yes I'm trying to perfect them to sell them.
And you are absolutely right about the latch. That's my big problem. Their's opens suicide, so the latch is easier to mount to a hard point. I don't want suicide doors, so it's tough coming up with a good hard point to mount a stud. But that's the direction I'm going. I misread your initial post. Thought you were talking about my hinge instead of the latch. I redesigned the door frame so I don't have to weld anything, redesigned the door mount using 1/4" plate, so I don't have to weld there, added stainless steel lift off hinges, so no pins to remove. Now I just need a good solid latch point and opener mechanism. It's hard because in the back side of the roll bar its all surrounded by plastic, I'm trying to avoid making a latch mounting bracket but I think I'm going to have to. I'm trying to keep my costs down so I can have a very competitive price. Kinda like the cfmoto brand. Cheap but effective. Except the American in me says strong thick steel! Lol.
Yeah I see what you are saying. Anyway I think you could really make some money if you market them correctly because really the only option at the moment is $800 on superatv doors. Now for the stainless steel hardware going through the plastic straight into the tube frame on the inside. Are they just screwed into the conduit or did you go through the conduit and put a nut. Curious how you did that
Actually just used half round conduit clamps. At the hinge I double sided 1/8 plate steel. Then just used 3/8" bolts with vinyl nuts to hold everything on. Doors are very lightweight
Thanks. Yeah they're pretty simple, just gotta refine some. I switched the latch mechanism, and added lift off hinges, so no pins to pull. They're just time consuming. Hard to price them to make it worth the labor to make.
Thanks. I highly recommend using stainless steel "Lift off" hinges for the doors. That's what I switched to after this video. They're awesome, male/ female connection, no pins to pull, and the whole door literally lifts off in 2 seconds. Good luck
I could live with those doors. I'm a man that doesn't like to be separated from his money. I've already spent to much on front & back bumpers plus a windshield. They want over a $1300 for the skid plate so going make my own.
Yeah I'm with you! Then when I see "there" doors, they open suicide, can't come off. I switched my hinges to "Lift off" style, they just lift up and my door is off literally 2 seconds. I love the uhmw plastic, 4x8 1/4" about $60. Heated up it bends and hardens back up. Made parts with it for my blinkers I installed
Awesome job! If you can please share what department you found the plastic I would really appreciate it. I have Lowes and HD here locally but can't seem to locate any plastic panels like this. Thank you!
It was in the paneling department. Also I switched the door hinges with stainless steel "Lift off" hinges. Top half is a male fitting, bottom half is a female. Top half lifts right out of the bottom and goes with the door. Literally 2 seconds to remove. I bought my plastic in 4x8 sheets, but 4x4 should work for each side. They're still working awesome.
@@ironheadbiker thank you for your reply! Have you tried to add a top section to the lowers to have an optional/convertible full door? I’d really like to incorporate that in addition to what you did to allow for a couple different options.
The latch I used a rubber hood latch that hooks onto a stud. The cutout I used a piece of cardboard, held it against the opening from the outside, went to the other side and got into the cab and traced it roughly. Then cut along the lines I traced and just slowly trimmed a little bit more each time until it fit the opening perfectly, then used a grease pen and traced the cardboard door onto the plastic I used. It was pretty easy. I just needed a good sized cardboard box that I unfolded to cover the whole opening.
It's HDPE 1/4" plastic. I got it at Menards, which is like a Home Depot or Lowe's. At the time it was $60 per 4'x8' sheet. Thanks for the thumbs up. I added "Lift off" hinges now so I don't even have a pin to pull. Takes 2 seconds to be door free.
Yeah I love them the most important thing for me was being able to remove them quickly. I use it around my property alot, and hate having to open and close a door every time I want to get in and out. I just open it up, lift it up and lean it against the wall and off I go.
That's an idea, but he sees out just fine, he's part mastiff and loves to sleep. So after awhile he just takes a nap. Lol. He usually walks over next to me and lays down.
Thanks. Yeah pretty easy. I found some stainless "Lift off" hinges. Now there's no pin to pull, just lift it off. I also moved my latch to inside on the base of the seat, I put some hdpe plastic through those two existing bolts, and arced it out towards the door, then mounted a spring bolt pin facing down. Left the passenger side with the bungi. Both work great, the lower mount used less metal and no hook left behind when the door is off. Both very effective and have held up great. Might tinker with a winter style for next.
Used single barrel gate hinge comes off easy. 1/4” marine wood covered it with bed liner coating. Left side guards on lock with 2” heavy Velcro very pleased will try to send pics. Thanks for your ingenuity saved me lots. Got about 150 in it THANK YOU!!!😎
Yeah it's ridiculous whet these companies want for them, and you can't remove them easily. I'm not a fan of the suicide style either, just like their new full doors. You can only pop the window open about 2-3 inches, and they're suicide style also. I wonder if any of these "engineers" actually use them. I really like using the HDPE plastic. I've since learned it's very "form-able" when heated. Made my blinker light mounts from the scrap of my doors. Just heated them and molded them around a formed piece of wood. Then cooled them quick in front of my A.C. in my garage. Very strong. But yeah, new "winter doors" with a open/ close window is next. I'd love to see the pictures. Ironhead2542@gmail.com is my email.
That's a helluva compliment! Thank you. I'm doing some revisions and really gotta go test them good, but yes I'm setting myself up to build more of these, that's why I want to make sure they're what I want in the end, and that they will hold up. Then once I have a good setup I can figure in my labor to come up with a fair price.
When you work through all of it...hit me up . I'd like a set for sure. My 2021 uforce1000 needs some doors, but the price commercial vendors want is ridiculous.
It is. And the fact they don't remove easily. Those super atv ones look nice enough, but the suicide style and not being able to take them off made me go this route. I use my side by side a ton around the house working, and I don't want to open and close a door every time I get in or out.
@@ironheadbiker I will also purchase a set, please let me know when you start taking orders. I really like the quick remove as well as a more affordable option. Thanks
Yes i actually am. I'm in the process of setting up my shop, and fine tuning the design. I get to go test ride them this weekend, so that will be fun. I know of a few changes I'll be making already, but between this and my dog's shotgun rider seat, I've had quite a few inquiries to where I'll pursue it farther. I'm a truck driver by trade, but one thing I've learned is that most effective tools or pieces of equipment were made by somebody who actually uses the stuff and makes something with that rarest of ingredients...... common sense. Thanks for the inquiry, and I'll be working as best as I can to get something setup, to where I can make them quickly but well made also.
Nice video. One of the better DIY doors I've seen made. Thanks for sharing.
Thank you very much!
Pretty impressive - and like your laid back presentation - shows a little ingenuity can go a long way!
Thanks. Yeah I upgraded my hinges to "Lift off style" like jeep runs. Literally lifts off in 2 seconds.
Really nice built doors and your breaking the bank account I really appreciate you taking the time to show these
Thanks. And a simple upgrade on the hinges, I switched to a "Lift off" style stainless steel hinge. They have a male/ female coupling system. No bolt to remove or lose. Just simply lifts off in a second
Well done! Luv the fact that your buggy is set up to accommodate the pups!
I appreciate it! Actually upgraded to a lift off style stainless hinge. Now it lifts off in 2 seconds, I just lift up the door and it comes off. Top half of hinge is a male fitting, the bottom is a female.
You just inspired me to build my own! Thanks for the great info in the video!
Probably the best home made ones ive seen.
Thanks. I made them better by using a stainless steel lift off hinge. Now it takes 2 seconds to just lift up and store them. They've held up nicely
You did a very good job. I like your method and style. I"m going to try to do the same thing with my 22 ZForce. Thank you for sharing.
Pretty easy I replaced those door pins with stainless "Lift off" pins, now I just lift the door off and set it in the garage, literally takes 2 seconds
good job, you gave me some ideas. I really didn't want to pay 600 bucks for a set of doors. Thank you
Thank you. I'm still making amendments to them. I added an angled plate to utilize the seat belt mounting bolts above the mirror mounts to add strength. I'm also going to revisit my latch mechanism, just to simplify it.
I agree: great job and the oem doors/half doors are stupid expensive! More than I will ever pay. I have a crew so, it's gonna be a challenge but you gave me motivation to do what I had been thinking about...lol
Thanks. I actually switched to a stainless steel lift off style hinge. Works awesome, it's a male/ female type. No pin to pull, just lifts off in a second and done
Dude. Very nice man. Cfmoto would probably buy the idea of you. Them are great. 👍
Thanks man, knowing China they'd probably just steal it. Lol. I'm working on a patent for it anyways, can't hurt to try
Great job! I am looking at the same thing. I appreciate your design.
I switched the latches to open from inside, and switched the hitches to a stainless steel "Lift off" hinge. No pins to pull now.
Looks great you did a nice job possibly for the insides you could use that that pipe insulation to wrap around the conduit and to fill the gap on the drivers side.
You're the 2nd guy to suggest that.i may look into doing something like that. Thanks for the kind words.
Absolutely love the design! Let me know if you decide to market these, I will buy a set 100%
Great build! I have a Kawasaki Teryx 4 and I don’t feel like spending three to $5000 for doors. I’m definitely running with your idea bro thank you so much for posting this!
Look into stainless steel "Lift off" hinges. I switched to that, no pins to pull. Good luck and I totally agree with the crazy prices they want for these "stamped"out doors.
Awesome, I’ll check ‘em out, thanks!
Well done. Very creative solutuion.
Thanks I switched the door hinge with lift off hinges now it literally takes 2 seconds to take them off.
Awesome job! Looks really great Hope to have me a new cf uforce 1000 this spring.
Thanks and cool! I think you'll like.
I like it. Great idea
Thank you. I added stainless steel lift off hinges so there was no pin to pull, just lift off.
That is good engineering there sir!
Thanks, just thinking for myself and my needs
Beautiful job. I dont have the patience. But for how much 💰💰💰 you saved fabbing up your own was amazing and they look great.🍻
Thanks man, yeah I'm very happy. Refining them here and there to make fabrication easier to duplicate. For example a better hinge style, (I love how easy they are to remove for around the house), and a better latching system. The cost (without labor) might go up around $150 per door, but the time I'll save will be worth it. Then might put them up for sale. I've had several (over 20) inquires, so I thought let's give er a try.
You did a really good job making those doors for your utv, and I see they fit perfect.
If it will rattle while driving, then you could put rubber around it for both sealing and remove rattle sounds.
But it will keep a lot of dust outside cabin while driving I guess.
Thanks and I will definitely do videos while I ride. They're very quiet, I have rubber foam tape on the one place they rub. My old side by side was notorious for dust, like most are, because of the opening by the foot well behind the front tire. Time will tell but they already beat those nets all to hell
@@ironheadbiker I did at first commenting before I was finished watching your video, and I heard you did mention while riding that you was already talking about rubber seal. But I think theese doors will work great, so much better than the net doors that doesn't do anything good regarding dust and cover.
Awesome man, gave me a lot of ideas.
Thanks. There's a better option for hinges, I found some stainless steel "Lift off" hinges. There's no pin to pull. Just lift up and they're off.
thats awesome!!! looks great, Sure beats paying $800 for the same thing
Thanks! And being able to remove them is a huge plus!
Excellent job my man!!! Cut a pool noodle for armrest on door!
Nice job, I'm thinking of one day fabbing doors for my ranger midsize, I'm not paying their ridiculous prices.
Yep that's what I did. Used emt conduit for a frame. Used a lift off style hinge so I can just lift the doors off when using it around the house.
@@ironheadbiker That exactly how it like to make mine. Cheers.
I like it! Great fabricating!
Awesome job
Thanks they were awesome.
good job and they are NOT suicide doors . the trim you were having problem with ,all you have to do is cut a v notch in both sides of the trim were it turns , the v notch should almost be cut all the way through so when you bend the trim it form a miter joint like a picture frame. AND for poor old GENERAL your dog you can a window opening in the door and put a piece of pexiglass for the window, and if your afraid of getting it all scraped up put a piece of wire mesh sandwiched between the door and pexiglass
The suicide doors I was referring to, are the ones Superatv sells. They hinge at the rear. I'm not a fan of those. I changed my hinges to the stainless lift off hinges. No pin to pull (they're a male/ female connection) and they literally come off in 2 seconds. Great tip on the notching the trim. I appreciate it.
Absolutely Impressed. With the doors, your channel, your machine. I just came across your videos the other day. Lmk if you start selling then because I would buy a set off you. Only thing I think needs some improvement is the hood latch how you have to lift and hook the door. Why not just put a pin and breakaway latch similar to the superatv doors? Other than that they seem to hold up beautifully and They are sleek and very nice. Keep the videos rollin man. Great Job
The big thing is wanted to remove them easily. I now changed the design where it's a lift off hinge like a jeep. No pin just lift up and they're off. I work around the house a lot and the doors is a pain in the ass when I'm getting in and out all the time. Thanks for the kind words and yes I'm trying to perfect them to sell them.
And you are absolutely right about the latch. That's my big problem. Their's opens suicide, so the latch is easier to mount to a hard point. I don't want suicide doors, so it's tough coming up with a good hard point to mount a stud. But that's the direction I'm going. I misread your initial post. Thought you were talking about my hinge instead of the latch. I redesigned the door frame so I don't have to weld anything, redesigned the door mount using 1/4" plate, so I don't have to weld there, added stainless steel lift off hinges, so no pins to remove. Now I just need a good solid latch point and opener mechanism. It's hard because in the back side of the roll bar its all surrounded by plastic, I'm trying to avoid making a latch mounting bracket but I think I'm going to have to. I'm trying to keep my costs down so I can have a very competitive price. Kinda like the cfmoto brand. Cheap but effective. Except the American in me says strong thick steel! Lol.
Yeah I see what you are saying. Anyway I think you could really make some money if you market them correctly because really the only option at the moment is $800 on superatv doors. Now for the stainless steel hardware going through the plastic straight into the tube frame on the inside. Are they just screwed into the conduit or did you go through the conduit and put a nut. Curious how you did that
Actually just used half round conduit clamps. At the hinge I double sided 1/8 plate steel. Then just used 3/8" bolts with vinyl nuts to hold everything on. Doors are very lightweight
Awesome great design 👌🏽
Awesome job. Definitely interested in a set if you decide to sell some.
Thanks. Yeah they're pretty simple, just gotta refine some. I switched the latch mechanism, and added lift off hinges, so no pins to pull. They're just time consuming. Hard to price them to make it worth the labor to make.
Well done!
Thank you! I actually switched to a "Lift off" style hinge so there's no pin to pull.
Looks good Sir.
Thanks, I'm very happy with how it turned out.
Very nice. Going to use some of these methods to make some doors for a yamaha rhino
Thanks. I highly recommend using stainless steel "Lift off" hinges for the doors. That's what I switched to after this video. They're awesome, male/ female connection, no pins to pull, and the whole door literally lifts off in 2 seconds. Good luck
I could live with those doors. I'm a man that doesn't like to be separated from his money. I've already spent to much on front & back bumpers plus a windshield. They want over a $1300 for the skid plate so going make my own.
Yeah I'm with you! Then when I see "there" doors, they open suicide, can't come off. I switched my hinges to "Lift off" style, they just lift up and my door is off literally 2 seconds. I love the uhmw plastic, 4x8 1/4" about $60. Heated up it bends and hardens back up. Made parts with it for my blinkers I installed
They look great.
Thank you, I'm still perfecting them. But they work great
Awesome job! If you can please share what department you found the plastic I would really appreciate it. I have Lowes and HD here locally but can't seem to locate any plastic panels like this. Thank you!
It was in the paneling department. Also I switched the door hinges with stainless steel "Lift off" hinges. Top half is a male fitting, bottom half is a female. Top half lifts right out of the bottom and goes with the door. Literally 2 seconds to remove. I bought my plastic in 4x8 sheets, but 4x4 should work for each side. They're still working awesome.
@@ironheadbiker thank you for your reply! Have you tried to add a top section to the lowers to have an optional/convertible full door? I’d really like to incorporate that in addition to what you did to allow for a couple different options.
Thought about it, but I haven't got that far.
Very nice
Thank you.
very nice 👍
Thanks. They worked great
How did you make the latch and measure the cutout?
The latch I used a rubber hood latch that hooks onto a stud. The cutout I used a piece of cardboard, held it against the opening from the outside, went to the other side and got into the cab and traced it roughly. Then cut along the lines I traced and just slowly trimmed a little bit more each time until it fit the opening perfectly, then used a grease pen and traced the cardboard door onto the plastic I used. It was pretty easy. I just needed a good sized cardboard box that I unfolded to cover the whole opening.
Looks GREAT!! Where did you get the plastic sheeting for the doors?
It's HDPE 1/4" plastic. I got it at Menards, which is like a Home Depot or Lowe's. At the time it was $60 per 4'x8' sheet. Thanks for the thumbs up. I added "Lift off" hinges now so I don't even have a pin to pull. Takes 2 seconds to be door free.
@@ironheadbiker Awesome brother!
Yeah I love them the most important thing for me was being able to remove them quickly. I use it around my property alot, and hate having to open and close a door every time I want to get in and out. I just open it up, lift it up and lean it against the wall and off I go.
Nice job, that’s perfect…
Thanks. Yeah I actually added lift off hinges. They're a stainless male/ female hinge like a jeep. They literally just lift off in 2 seconds
@@ironheadbiker
You do nice work
Thanks. I just wanted doors I could take off for around the house. Can't see paying $800 for doors that don't come off.
@@ironheadbiker
I think I’ll give it a try
Here's the hinges linksharing.samsungcloud.com/8WI5bdURo9id
cut a whole in the dogs door and then on the outside mount some type of netting or trellis so that good ol boy can look outside again
That's an idea, but he sees out just fine, he's part mastiff and loves to sleep. So after awhile he just takes a nap. Lol. He usually walks over next to me and lays down.
Nice job used your idea made some
Thanks. Yeah pretty easy. I found some stainless "Lift off" hinges. Now there's no pin to pull, just lift it off. I also moved my latch to inside on the base of the seat, I put some hdpe plastic through those two existing bolts, and arced it out towards the door, then mounted a spring bolt pin facing down. Left the passenger side with the bungi. Both work great, the lower mount used less metal and no hook left behind when the door is off. Both very effective and have held up great. Might tinker with a winter style for next.
Used single barrel gate hinge comes off easy. 1/4” marine wood covered it with bed liner coating. Left side guards on lock with 2” heavy Velcro very pleased will try to send pics. Thanks for your ingenuity saved me lots. Got about 150 in it THANK YOU!!!😎
Yeah it's ridiculous whet these companies want for them, and you can't remove them easily. I'm not a fan of the suicide style either, just like their new full doors. You can only pop the window open about 2-3 inches, and they're suicide style also. I wonder if any of these "engineers" actually use them. I really like using the HDPE plastic. I've since learned it's very "form-able" when heated. Made my blinker light mounts from the scrap of my doors. Just heated them and molded them around a formed piece of wood. Then cooled them quick in front of my A.C. in my garage. Very strong. But yeah, new "winter doors" with a open/ close window is next. I'd love to see the pictures. Ironhead2542@gmail.com is my email.
Do you have any part # for the door material?
Sorry I didn't reply earlier. It's 1/4" uhmw plastic bought at my local Menards, (like a Lowes or Home Depot. ) I paid $80 for a 4x8ft sheet.
@@ironheadbiker thank you!
Do you have a link for the snowmobile hood latch?
Buyers Products WJ208 Truck and Trailer Rubber Hood Latch a.co/d/fqA2oSE
@@ironheadbiker Thanks!
No problem.
👌👍🏻👍🏻👍🏻
Thank you sir!
I’d go as far as purchasing a set of these if you’d care to make another set...?
That's a helluva compliment! Thank you. I'm doing some revisions and really gotta go test them good, but yes I'm setting myself up to build more of these, that's why I want to make sure they're what I want in the end, and that they will hold up. Then once I have a good setup I can figure in my labor to come up with a fair price.
When you work through all of it...hit me up . I'd like a set for sure. My 2021 uforce1000 needs some doors, but the price commercial vendors want is ridiculous.
It is. And the fact they don't remove easily. Those super atv ones look nice enough, but the suicide style and not being able to take them off made me go this route. I use my side by side a ton around the house working, and I don't want to open and close a door every time I get in or out.
@@ironheadbiker I will also purchase a set, please let me know when you start taking orders. I really like the quick remove as well as a more affordable option. Thanks
Thank you, I'm still perfecting them, the new jeep style hinges I'm using now make them a lift off style. I'm changing the latch also.
Interested in making and selling any?
Yes i actually am. I'm in the process of setting up my shop, and fine tuning the design. I get to go test ride them this weekend, so that will be fun. I know of a few changes I'll be making already, but between this and my dog's shotgun rider seat, I've had quite a few inquiries to where I'll pursue it farther. I'm a truck driver by trade, but one thing I've learned is that most effective tools or pieces of equipment were made by somebody who actually uses the stuff and makes something with that rarest of ingredients...... common sense. Thanks for the inquiry, and I'll be working as best as I can to get something setup, to where I can make them quickly but well made also.
Awesome great design 👌🏽