Very nice video, I’m learning as I go with my new commander. Lots of videos and practice lol Not sure the wife loves all my garage time but who cares.. 😂
Heard about a lot of failure of super atv “heavy duty” ball joints the stud breaking off..Hopefully not gonna happen to you but I know you’re not particularly easy on your shit 😂😂 good video man!
Love the portals I just got a 2021 rancher 420 4x4 base model foot shift and I love it it will be used manly as a hunting bike but better than my 250 recon
Okay I just got 6” boxes with 37s thinking about getting limit straps too, what spec did you put your shock to or is it just a preference , also I’m surprised iv never seen you at hollow paw
I had the gen1 4" boxs on my og mav then recently (about 2 months ago) upgraded to the 8" gen3 boxs and i am MUCH HAPPIER those gen1s were absolutely trash! Im running 44" terminator maxs on 24" fuel strokes with just 8" boxs and 4" bracket lift and it actually rides pretty smooth to be so big, im really impressed with the gen3 boxs
Mudpuppy would these fit a pioneer 2020 I assume they would ( bit of welding and cutting ) also not sure if you’d know but could you run tracks with these on ? Again I assume not ? We are after more clearance with our pioneer got w 3 inch lift and camso tracks but... need more any suggestions
Take a look at our Channel we have videos if you’d like to see our set up totally different from what you do we work out bikes but it’s deep thick mud so suppose similar hah
What are the measurements on the width of the X with the portals ... I know you was saying this was the reason you got the X plus the way the trailing arm bolts on ... so what’s the width ?
I’m looking for an upgrade from my 03 grizzly 660. I’m looking at either a used Brute 750 or a brand new 2020/21 Honda rancher 420 4x4. I want the Honda Bc of reliability but the brute for the power. All I need is a push either way. I know you have a lot of Honda’s so I figured I’d ask.
PLZ READ!!! I want to see you put 8” portals on your Jeep that would look amazing and then in 4wd-lo the gear reduction would be stupidly low it could climb a wall at idle lol
@@MudPuppyOffroad it's not necessarily that they will fail from just driving it just makes it a whole lot easier to Pop the ball joint out if the front tire hit something with force
I could imagine how much power is lost with portals 🤣😂🤣 I'm waiting tell talon puts a turbo on then I'll get one, I did however see a guy on youtube who turbo'd one.
That repeat on the video messed me up man I thought I was seeing things 😂
Got me too!
Lol I was reading this and was wondering wtf y’all was talking about then looked up and the video repeat happened lol
By far my favorite person on RUclips no homo! Straight up tell you how it is kinda guy
it killed me when he says turn the camera off when he is supposed to torque them
Just started watching your videos and seen your down here in Florida I’m in Lakeland
Does mud puppy work at Honda?
You just got a sub simply from the "turn the camera off" lmao Great info vid
really really been thinking about getting a talon. are they worth it?
Very nice video, I’m learning as I go with my new commander. Lots of videos and practice lol
Not sure the wife loves all my garage time but who cares.. 😂
Heard about a lot of failure of super atv “heavy duty” ball joints the stud breaking off..Hopefully not gonna happen to you but I know you’re not particularly easy on your shit 😂😂 good video man!
I have as well... But at least if I'm running their ball joint in their portal I can roast the shit out of them when it fails
Love the portals I just got a 2021 rancher 420 4x4 base model foot shift and I love it it will be used manly as a hunting bike but better than my 250 recon
Clicked this so fast lol
how do you adjust the prelload on the shocks
With the giant nuts on top of the springs removed from the vehicle first and clean threads
Okay I just got 6” boxes with 37s thinking about getting limit straps too, what spec did you put your shock to or is it just a preference , also I’m surprised iv never seen you at hollow paw
When ordering when it says one qty is that that for all four portals, or do I have to put in four as qty
They come as a set of 4
Do they not make a crows foot small enough for those ball joints?
Did you get those tires and wheels from a guy with a p500
When are you going to do a riding video I would love to see one soo
Tomorrow'
Let’s gooo I look forward to watch it man
I had the gen1 4" boxs on my og mav then recently (about 2 months ago) upgraded to the 8" gen3 boxs and i am MUCH HAPPIER those gen1s were absolutely trash! Im running 44" terminator maxs on 24" fuel strokes with just 8" boxs and 4" bracket lift and it actually rides pretty smooth to be so big, im really impressed with the gen3 boxs
Do you have to do a gear reduction if you put portals on
Mudpuppy would these fit a pioneer 2020 I assume they would ( bit of welding and cutting ) also not sure if you’d know but could you run tracks with these on ? Again I assume not ? We are after more clearance with our pioneer got w 3 inch lift and camso tracks but... need more any suggestions
Take a look at our Channel we have videos if you’d like to see our set up totally different from what you do we work out bikes but it’s deep thick mud so suppose similar hah
No different axle splines
Damn ! Ok appreciate it do you know if the super ATV lift is any good for them ?
Nice Setup man. Did you go with Billet or Cast Portal boxes?
Cast
Intstalling 6” boxes on talon right now what upper ball joints should I order tomorrow?
The only ones available are super ATV and they're junk not sure they're any better than factory
"Obviously we just torqued that down" lmao 🤣 😂
What are the measurements on the width of the X with the portals ... I know you was saying this was the reason you got the X plus the way the trailing arm bolts on ... so what’s the width ?
Portals add 8" my wheels add another inch up front so I'm right at 70" wide up front. Rear was 67" until I added 1.5" spacers
When's the first ride video?
What's better the talon x or talon r
can you re use the stock honda lower balll joint?
Yes
Do you think I could turn 30 aztects on a honda rancher without a gear reduction
Nope
thanks
What % gear reduction are your portals?
45% aka 1.82:1
Thanks brother!
are you going to be able to "cut up" with those 8s? . as in doing donuts and what not
Hell no lol
What do you think about 27 interforce 2 tires
Do you think I can turn 28 aztects a honda rancher stock
What do you do mud puppy?
Not upgrading suspension ?
Nope
Is it going to fit in the garage ?
No lol
hey mud puppy what do you think is the biggest tires i can run on a susuki vinson 500 without a clutch kit
40s
@@coltondarland7017 oh yeah planned on gettin 40s😂
@Dylan Hopkins yeah but he knows his shit and most other brands are shitty lmao he just tellin people how he thinks
I run 27 on my kq500
I’m looking for an upgrade from my 03 grizzly 660. I’m looking at either a used Brute 750 or a brand new 2020/21 Honda rancher 420 4x4. I want the Honda Bc of reliability but the brute for the power. All I need is a push either way. I know you have a lot of Honda’s so I figured I’d ask.
Omg “a lot of people say don’t reuse caterpins, privileged assholes” I don’t know but the way he said it made me laugh so hard lol
Does that void the warrantee ?
its a honda... no warranty needed
Did you use portal blood? Thoughts ?
I did not but I will be testing it with my 8 inch portals people say it's good... But regular oil never gave me any problems so....
What made you not go with highlifter portals ?
Too heavy. And I have a Honda talon...
@@MudPuppyOffroad understandable and you ain’t building a bounty hole rig so theirs no need to over build something
Hey man just found your channel. Awesome content just need a better mic at times. Can barely hear what you are saying in some yours videos.
Yeah... That's the downside of water proof cameras and watching content with shitty cell phone speakers lol
PLZ READ!!! I want to see you put 8” portals on your Jeep that would look amazing and then in 4wd-lo the gear reduction would be stupidly low it could climb a wall at idle lol
Lol
More idle testing for newer Honda’s!
I seen this today out at holopaw It looked great
Nice outcome 👌
They need to make portals for a 420. I have 28 zillas on my 420 works good
Are you going to #hogwaller
Gonna be a bad ass machine
I know when I say no sponsor it’s because I mean it u can do anything with those units an testing spending money
Hello Honda !!!
2:40 look at that jack lol
Hate to say it but it's going to make it break the ball joint super easy
Worked great yesterday
@@MudPuppyOffroad it's not necessarily that they will fail from just driving it just makes it a whole lot easier to Pop the ball joint out if the front tire hit something with force
I could imagine how much power is lost with portals 🤣😂🤣 I'm waiting tell talon puts a turbo on then I'll get one, I did however see a guy on youtube who turbo'd one.
You can order them with a turbo
👌
You told thieves where your parking it until your shop is built!! Not smart
ive never seen his face... lol
Clicks on Save for later. Lol
Find some superior tractions best tire I promise you
First
First one here