How to replace rear corner panels and rear cross sill on a Jeep TJ - Part 2 Owner Disassembly
HTML-код
- Опубликовано: 6 сен 2024
- 1997 jeep tj has rusted corner panels, rear sill, body mounts and the tail gate hinge bolts are seized. I'll show how i went about removing and replacing everything. Tools i used were a grinder with a cutting wheel, flapper disk 40 grit, drill and a chisel. will take some time and patience but with some determination it can be done with basic tools and experience. Breaking the process down into smaller steps as not to get overwhelmed is how i approached it.
Your video is much appreciated from someone about to begin this journey. Thank You for sharing your repair.
Your welcome, good luck take you time.
Slow and steady wins the race. Excellent videos and thanks for the info.
Totally and your welcome 🤗