I’m 75 years old, had a hip replacement 40 days ago. Had a little trouble finding the inside release clip on my 2019 ram classic. What a difference, should have done this when I bought it new
You were sport on the install. But left one detail out. the leds need to face 9 oclock and 3 oclock for that nice flat beam. I have no flicker issues rite out the box. no extras needed.2019 ram classic tradesmen.Great video showning how to take the front end apart, it was about a 30 minute job for me.
Hey , quick question! What’s the spect for the complete kit ? I had buy one but don’t fit my harness! I have a 2012 ram 1500 laramie, I’ll appreciate your help, by the way awesome video
Hey just fyi ive used this brand and mfgr products on different vehicles and if u r having fitment issues with the bulbs as in fitting and locking snugly in the housing use oem oring from oem bulbs its easy use picks which u should have had in your list of tools for help with undoing clips lol. U will notice an improvment as in firment cheers!!
I just bought the same set for my 2011 Ram 2500 I also bought the decoder kit. I read on some Ram trucks there is flickering or error on dash . I live too far from anything to stop the job to order a part , but I will install without the decoder and see . Great video the first set of burnt out bulbs I installed I broke the tab off the drivers side headlight assembly didn't know about that latch. I thought I'd replace it but didn't if anyone has one let me know.
@@brucewebber6983 wow that's great. So u have the same ones in the video but you didn't have to use or mount the decoders like they did on the videos? That's pretty good news. I have a 2011 ram 1500 so hopefully mine is like yours just plug and play. I already switched fog lights and didn't need decoders just plug and play but have not tried headlights yet.
After you installed the led lights . Did the dashboard throw an error code. Because at the Dodge dealership they said it will throw a code if I upgrade my 2019 Dodge ram classic from halogen to led did you have this issue and if so how do you correct the error code if it comes up
I have a question that might be stupid because I have not see it asked anywhere on youtube, But here it goes. My 2011 1500 SLT only had one bulb for low and high beam so only one plug for headlights and one plug for turn signals. The housing was faded and scuffed so I purchased a good used one on facebook but it has 2 slots one for low beam bulb and one for high beam bulb, so when you purchase these led bulbs do the plugs hook together so you only need one plug for low and high beams? I hope so since I only have one headlight plug for each side? Confused here.
The bulb that's in your is called a two element bulb. Which controls both the high & low beam. Led bulbs aren't two elements, so they can't be used in your application.
I have a 2015 did the conversion to LED bulbs but the many sets we try they just don’t work they flick we try the same brand decoders but still have the same problem can u help
So I’ve seen some other videos where they remove the 2 bolts and the latch in the back of the headlight. My question is, would you recommend that way of removing the headlight? I know one bolt is the adjuster for the headlight but it seems all they did was just remove it and they didn’t have any problems after
Hi I have a question. I got a lumens led conversion kit and the high beam is having trouble getting the block into place inside the housing. Any tips? I kinda sorta got the cap back on but I’m not happy with how it’s sitting
Low beam is h11, high beam is 9005 and fogs are 9006 I believe. H11 and 9005 aren't interchange. 9006/9005 can be interchanged with some modifications to the plug or bulb socket.
I don't understand "save tons of time"I just did my 16 Ram 2500 took me all of 5 min. to remove the Grill,you can not just reach behind the headlight assembly and remove the bulbs.
Last time I pulled my grille I scratched the front bumper. Any advice on how not to do that? I’m gonna do the headlights before I get it fixed, but for future reference.
Either dont buy cheap led from Amazon or change the harness fpr the headlight I changed both of mine n there still going out so my buddy said its cheap led from Amazon spend the money for glod led its worth it
I use the same brand and you should have it side to side not up and down for best light distribution and no blinding too high aimed light to make people flash their high beams at you.
@@jord8584 Not all of them have high beam sides to set. Some use the same bulbs for both high and low. Means you set low and high should be fine. If not and they use different bulbs just do them both side to side and see. Might have to set the highs to up and down. Don't matter if you remember to dim your lights when meeting someone, I guess...lol.
You skipped over the only part I watched this video for 😂 the build on the bottom needs to be at 3:00-9:00 but won’t fit due to tab sizes. I’m assuming you had some issues with that as well since you skipped that scene
Hi Josh, I just spent 3 hours trying to figure out a way to clock, or rotate my new LED bulbs, and after contacting Sealight, the manufacturer, they've decided that vertical orientation is ok here. I'm really disappointed, and may just return the bulbs, and get ones that are adjustable.
Isn’t those square diodes you put in with the light supposed to be put in a cool place ? I haven’t installed mine yet so im curious, wouldn’t there be to much heat in there with the light ? Just wondering if I should do them like you did or stick them on the outside? Let me know what you think ? Id appreciate it thanks
I use the same name brand and you should make sure it's side to side...3 and 9 on the leds and that box needs to be outside and the dust cover left off to keep it from overheating. Didn't do mine and had to replace 2 different sets from overheating in a 2 month time. You could tell they overheated being covered up with the diode system inside, too because both sets of mine had melt marks on the back of the dust covers and a small place on the back of the bulb plug and the diode box looked like it had gotten hot enough to sort of twist where it was straight before. Left the cover off and the diode box outside wire strapped in place so it wouldn't rattle and that was 2 years ago and no issues since.
@@TimfromAlabama redid them tonight the only problem I encountered was if your shining the head lights on a wall you can notice the low beam is pulsating very fast most dont notice it but i do any fix for that ???????
@@TimfromAlabama hey i pulled mine out left off the dust covers but have you noticed your inner headlights getting dirty inside ? Or bugs ? Thats my worry now because snow plow season is soon coming so now that its cold out should i tuck everything in or just leave it out I appreciate your advise . Thanks
@@StreetcarShenanigans well 2 days after install they burned up. Had to drive with high beams on all the way home from work an hour away. Not happy with these.
@@05rickie they are in a 2015 Ram 1500. Fahren told me to get canbus adapters. No problems anymore with them. I need fog and high beams now. Will get shortly and an LED light bar.
I have a 2011 Ram 2500 I have replaced the headlight bulbs 4 times on mine no way you could without taking the grill off. The left side is against the washer tank . .Maybe newer ones are different .
I’m 75 years old, had a hip replacement 40 days ago. Had a little trouble finding the inside release clip on my 2019 ram classic. What a difference, should have done this when I bought it new
You were sport on the install. But left one detail out. the leds need to face 9 oclock and 3 oclock for that nice flat beam. I have no flicker issues rite out the box. no extras needed.2019 ram classic tradesmen.Great video showning how to take the front end apart, it was about a 30 minute job for me.
Can you share a link for the bulbs? Which ones?
Hi, Charlie. How did you adjust the diodes to 3-9? My new sealight LEDS are factory set to 6-12, and sealights reply, is to just leave them at 6-12?
@@justinfynes7611 The Fahren LED"S are adjustable
I just removed mine without removing grill. Just need a 12" extension to get to the bottom bolt. No problem and quick.
Bottom bolt where?
Where can I find a video
You can get to the bolt easy, but the tab with the bolt hole hits into back of grill. At least on my 2011.
That brand is the way to go. Good support too.
Thank you very much for your tutorial! It helped us a lot and make the light change faster! 😊
You dont have to remove the grill to change the headlights. Takes 15 minutes to do both without removing the grill
Then please explain how.
post a video then.
I used a long extension on socket to reach bottom bolt
Every Ram I've seen that Crack where the top bolt goes to the housing group. Yours mine a buddy's and another video I watched.
Hey , quick question! What’s the spect for the complete kit ? I had buy one but don’t fit my harness! I have a 2012 ram 1500 laramie, I’ll appreciate your help, by the way awesome video
Hey just fyi ive used this brand and mfgr products on different vehicles and if u r having fitment issues with the bulbs as in fitting and locking snugly in the housing use oem oring from oem bulbs its easy use picks which u should have had in your list of tools for help with undoing clips lol. U will notice an improvment as in firment cheers!!
Thanks!
Amazing tutorial. Thanks guys
Great video helped me a ton! Installed them last night came out great!
Any issues with them? Errors?
What is the part number of the LED bulbs that you installed from Amazon
Did you end up putting the dust cover back over the low beam? Would that make the bulbs over heat?
I just bought the same set for my 2011 Ram 2500 I also bought the decoder kit. I read on some Ram trucks there is flickering or error on dash . I live too far from anything to stop the job to order a part , but I will install without the decoder and see . Great video the first set of burnt out bulbs I installed I broke the tab off the drivers side headlight assembly didn't know about that latch. I thought I'd replace it but didn't if anyone has one let me know.
Decoder kit ? I'd love to run mine without resistors...
Did you need the decoder kit? Or did it work well. I heard daylight running lights can cause issues with flickering
@@ryanv7195 I had no issues did not need the decoder kit send it back . Still very happy with these headlights
@@brucewebber6983 wow that's great. So u have the same ones in the video but you didn't have to use or mount the decoders like they did on the videos? That's pretty good news. I have a 2011 ram 1500 so hopefully mine is like yours just plug and play. I already switched fog lights and didn't need decoders just plug and play but have not tried headlights yet.
@@ryanv7195 I went all those years with out being able to see . Now it's great driving at night I used to dread it .
Just pop the back corner out from the rear in the acess panel you opened much easier then prying from the front corner
Just installed mine using your video. Thanks for this.
Might as well black tint that grill ...after that assessment... lol cool P-tunes playing along ... I tinted mine the same day along with bumper
After you installed the led lights . Did the dashboard throw an error code. Because at the Dodge dealership they said it will throw a code if I upgrade my 2019 Dodge ram classic from halogen to led did you have this issue and if so how do you correct the error code if it comes up
Every person that says these headlights just annoy other drivers end up esing them and instantly liking them. literally every person.
Got a link for the LED bulbs?
I have a question that might be stupid because I have not see it asked anywhere on youtube, But here it goes. My 2011 1500 SLT only had one bulb for low and high beam so only one plug for headlights and one plug for turn signals. The housing was faded and scuffed so I purchased a good used one on facebook but it has 2 slots one for low beam bulb and one for high beam bulb, so when you purchase these led bulbs do the plugs hook together so you only need one plug for low and high beams? I hope so since I only have one headlight plug for each side? Confused here.
The bulb that's in your is called a two element bulb. Which controls both the high & low beam. Led bulbs aren't two elements, so they can't be used in your application.
Is bottom adjuster supposed to be all the way down mine moved wasn’t aware of it affecting anything by other videos I watched
I have a 2015 did the conversion to LED bulbs but the many sets we try they just don’t work they flick we try the same brand decoders but still have the same problem can u help
Did you have problems with the lites turning off in the beginning, it was like my computer needed to learn the new bulbs?
Have you had any problems with flickering ?
So I’ve seen some other videos where they remove the 2 bolts and the latch in the back of the headlight. My question is, would you recommend that way of removing the headlight? I know one bolt is the adjuster for the headlight but it seems all they did was just remove it and they didn’t have any problems after
What kind of led headlights were they
amazon says this won't work with my 2021 Ram 1500 Classic. Is it full of crap or will it install the same way as the older models?
Should work if your truck has the non projector halogens
@@DanielSon69What difference does it make ? You can put led bulbs in projector headlights.
My LEDs don’t look like that mine look so dimmed like off like something was in the way like a refloctor or some in the way idk!?
Try replacing them with another pair. Maybe it's a faulty bulb. Or see if anything (like a smudge or dirt) is on the light itself.
Hey man what kind of light you use for fog lights ?
Thinking about doing this to my 2017 ram 1500. Any issues with errors or flickering. Some places recommend buying the anti code piece.
I just put some in my 2016 ram truck found out that I need a decoder now because I’m getting a bulb out now on the dash cluster
@@kurtsmith5202 I traded my ram in but I did the auxito and never had that issue.
Cool stuff.
Not as cool as mustang stuff! Lol
@@StreetcarShenanigans Touche...but I still watched it lol
Updates on the product?
What brand fog lights did you put in?
I have a 2017 Dodge Ram 1500 I have halogen light right now but want led what do you suggest
If your headlights keep going out its either the harness or the led themself buy the expensive led n save ur self the head ache
can you list the name and maybe link to the lights so we can check them out ?
They're called Fahren 9145/H10/9140 LED
I believe that's a Big Horn. Judging by the grille, wheels & factory running boards. Same headlights for both though.
Correct, good eye!
@@StreetcarShenanigans do you have the LED kit part numbers like H11 low beam and 9005 high beam if so, what watts of the bulbs were on the dodge ram?
Good job how do I order those same lights for my 2014
Amazon
Hi I have a question. I got a lumens led conversion kit and the high beam is having trouble getting the block into place inside the housing. Any tips? I kinda sorta got the cap back on but I’m not happy with how it’s sitting
Unfortunately without looking at it tough to say! I thought the bulbs them selves fit poorly, didn't lock well
You use the same light bulbs for the fog lights to ??
I've been told you can use the same bulbs on high, low & fog.
Low beam is h11, high beam is 9005 and fogs are 9006 I believe. H11 and 9005 aren't interchange. 9006/9005 can be interchanged with some modifications to the plug or bulb socket.
Is removing the grill and entire housing necessary? Just reach behind headlight housing like everyone else and save tons of time...
I don't understand "save tons of time"I just did my 16 Ram 2500 took me all of 5 min. to remove the Grill,you can not just reach behind the headlight assembly and remove the bulbs.
I now have an error for one headlight bulb out, but all the bulbs work. What now?
Drive it
What brand bulbs are these?
Last time I pulled my grille I scratched the front bumper. Any advice on how not to do that? I’m gonna do the headlights before I get it fixed, but for future reference.
Blue painters tape
U don't need to remove the grill.atleast not on an 18
What r these called on Amazon there is so many
Do you have a link for the lights?
Wait so did you need a harness for the led lights?
Came as complete plug and play kit
@@StreetcarShenanigans thanks for your response.
I recently bought this but my low beams keep turning off. Any advice?
Either dont buy cheap led from Amazon or change the harness fpr the headlight I changed both of mine n there still going out so my buddy said its cheap led from Amazon spend the money for glod led its worth it
What was the number for the fog lite bulbs?
Should be 9145
So did you aim/orient the low beam led vertically or horizontally?
I use the same brand and you should have it side to side not up and down for best light distribution and no blinding too high aimed light to make people flash their high beams at you.
@@TimfromAlabama how about the highbeams?
@@jord8584 Not all of them have high beam sides to set. Some use the same bulbs for both high and low. Means you set low and high should be fine. If not and they use different bulbs just do them both side to side and see. Might have to set the highs to up and down. Don't matter if you remember to dim your lights when meeting someone, I guess...lol.
What brand are the lights?
It shows the boxes and he says they came from Amazon,how much more do you need,I figured it out and ordered the same lights from Amazon
You skipped over the only part I watched this video for 😂 the build on the bottom needs to be at 3:00-9:00 but won’t fit due to tab sizes. I’m assuming you had some issues with that as well since you skipped that scene
Hi Josh, I just spent 3 hours trying to figure out a way to clock, or rotate my new LED bulbs, and after contacting Sealight, the manufacturer, they've decided that vertical orientation is ok here.
I'm really disappointed, and may just return the bulbs, and get ones that are adjustable.
Any errors on the dash?
Nope!
Isn’t those square diodes you put in with the light supposed to be put in a cool place ? I haven’t installed mine yet so im curious, wouldn’t there be to much heat in there with the light ? Just wondering if I should do them like you did or stick them on the outside? Let me know what you think ? Id appreciate it thanks
I use the same name brand and you should make sure it's side to side...3 and 9 on the leds and that box needs to be outside and the dust cover left off to keep it from overheating. Didn't do mine and had to replace 2 different sets from overheating in a 2 month time. You could tell they overheated being covered up with the diode system inside, too because both sets of mine had melt marks on the back of the dust covers and a small place on the back of the bulb plug and the diode box looked like it had gotten hot enough to sort of twist where it was straight before. Left the cover off and the diode box outside wire strapped in place so it wouldn't rattle and that was 2 years ago and no issues since.
@@TimfromAlabama redid them tonight the only problem I encountered was if your shining the head lights on a wall you can notice the low beam is pulsating very fast most dont notice it but i do any fix for that ???????
@@TimfromAlabama hey i pulled mine out left off the dust covers but have you noticed your inner headlights getting dirty inside ? Or bugs ? Thats my worry now because snow plow season is soon coming so now that its cold out should i tuck everything in or just leave it out I appreciate your advise . Thanks
Will they overheat with the covers on?
No issues. Led is not hot like hid
@@StreetcarShenanigans well 2 days after install they burned up. Had to drive with high beams on all the way home from work an hour away. Not happy with these.
@@StreetcarShenanigans Then why the need for the fan ??
@@badredfire3valve944 What vehicle where they in,and what did Fahren say about that ?
@@05rickie they are in a 2015 Ram 1500. Fahren told me to get canbus adapters. No problems anymore with them. I need fog and high beams now. Will get shortly and an LED light bar.
I have a 2019 bighorn classic would these work?
They should
As long as your current lights are the non projector halogens
Lol hey my top blot was cracked also even from dealership
Holy fuck ,my headlights are on the side of the rd..and in the sky ...wtf
Its all in the black gloves. 😂
Next thing you should invest on is a tripod, Jesus, I feel like I’m on a rollercoaster. Have someone else film.
I ended up with mild nausea lol
WRONG. THERE ARE TONS OF VIDEOS, WHERE YOU DO NOT HAVE TO REMOVE THE GRILL.
I have a 2011 Ram 2500 I have replaced the headlight bulbs 4 times on mine no way you could without taking the grill off. The left side is against the washer tank . .Maybe newer ones are different .
I have a 16 Ram 2500,takes all of 5 min. to remove the grill,come on guys don't be lazy.
@@05rickie 5 minutes. Exaggeration
@@05rickie Lazy...? Why add a step if it's not necessary 🤣?! 🙄 Duh
Jesus, hold the camera still. Couldn't see a thing for all the jiggling. Going to another channel. This is worthless.
I bought some that was plug and play with no fans and they got extremely hot so I took them out
Will this method work on a 2017 5500
Yes