5 inch makita disc sander

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 31

  • @lakebrunnerscaffolding6832
    @lakebrunnerscaffolding6832 4 года назад +1

    Hi what drill is that?
    any special attachments i need this for sanding my house?
    Regard's
    Great Video by the way?

    • @okeefepainting1023
      @okeefepainting1023  4 года назад +1

      Its the makita disc sander. Everything you need comes in the box. You wont be able to use it on a lead based home though, no shroud or vac attachment available that I know of.

    • @lakebrunnerscaffolding6832
      @lakebrunnerscaffolding6832 4 года назад

      Thank you for the reply 😊
      So is that a drill or impact driver

  • @richardmuscarella6349
    @richardmuscarella6349 4 года назад

    How do u change out plastic disk to use a stick on disk pads which they have for more variety if 100, 120, 150, 180 stick on pads u cannot find these smoother gtir pads that work with standard disk supplied with the machine

  • @trappinout18
    @trappinout18 3 года назад

    Would a makita 7" dust shroud allow for the 7" pad while still allow feathering?

  • @kensternberg3780
    @kensternberg3780 3 года назад

    Amateur painter here. I have this sander and often get swirl marks in the wood. How do you avoid this? Thanks.

    • @irondisciple2984
      @irondisciple2984 3 года назад +1

      Your grit it to heavy for the job the lower the grit number the more heavy duty it is 36 and below. and if you touch bare wood to it it will grind the wood badly. Use heavy grits to remove bad paint don't go further after removing the paint it's not to smoothen the wood. If you want to smooth out the wood use a grit that is 50 or 60+ the higher the number the better it smoothens the wood. And check if the grit has melted paint on it if it does try removing it if you can't change the grit. The melted paint acts as part of the grinding since it's above the surface of the grit it will mark the wood badly.

    • @1joshua
      @1joshua 2 года назад +1

      Use a [random orbital sander] to remove the swirl marks

    • @1joshua
      @1joshua 2 года назад

      This is an orbital sander, well known for leaving swirl marks,. Try using a random orbital afterwards. The randomness of the orbit is to prevent leaving swirl marks while sanding.

    • @triedtofail
      @triedtofail 5 месяцев назад

      @@1joshua This is a rotary tool. Neither orbital or random. Orbital means tiny circles regardless if it is rotating or is stationary. For example there are square orbital sanders

  • @25258721
    @25258721 4 года назад +1

    What grit do you typically use for sanding siding?

    • @okeefepainting1023
      @okeefepainting1023  4 года назад +2

      We typically use 50 grit

    • @malcolmbaldwin5735
      @malcolmbaldwin5735 4 года назад

      @@okeefepainting1023 when you get better at disk sanding , maybe you can use this brown 24 grit disks thats available here in so-cal . If you know whats up you wont even have to orbital sand it after

    • @americaneaglepainting187
      @americaneaglepainting187 4 года назад +1

      We typically use 50 or 60 grit as well. Tried the wagner paint eater recently. Not bad at all 👍🏻

    • @racerealist7988
      @racerealist7988 2 года назад

      I've used this for 30 years. Forget scraping. Use a 16 grit disc. It's way more aggressive and you blast out the prep. Yes, 16 grit.

  • @huym6171
    @huym6171 4 года назад

    what kind caulking do you use for house siding?

    • @okeefepainting1023
      @okeefepainting1023  4 года назад

      We typically use Power house from Sherwin Williams or Big stretch

    • @huym6171
      @huym6171 4 года назад

      @@okeefepainting1023 thanks. i just bought this sander for 50, getting ready to paint the house.

    • @malcolmbaldwin5735
      @malcolmbaldwin5735 4 года назад +1

      @@okeefepainting1023 dont be a hack , prime before chaulking . Alex 40 year is totally acceptable and cheaper chaulk

  • @americaneaglepainting187
    @americaneaglepainting187 4 года назад

    I have several of these sanding machines, love them !!! I am a new painting business owner out of Massachusetts. Any help on estimating projects? I have been having a little issue with coming up with an accurate system to use on estimating exterior and interior projects...

    • @okeefepainting1023
      @okeefepainting1023  4 года назад +1

      I use PEP cloud paint estimating. They have some standard production rates which you can use until you've recorded your own. The best way to record your own is to measure lineal ft or square ft of the surface youre working on and then write down how long it takes to get it done. Estimate Rocket is also a pretty popular estimating software. Estimating exteriors is challenging though, there's a lot of variables.

    • @americaneaglepainting187
      @americaneaglepainting187 4 года назад

      Thank you will definitely check it out.

    • @malcolmbaldwin5735
      @malcolmbaldwin5735 4 года назад +1

      @@americaneaglepainting187 figure out how much you want per man day of labor , then figure out how many days it will take , then simple math . Hope you're not trying to do this to put food on the table

    • @americaneaglepainting187
      @americaneaglepainting187 4 года назад

      Malcolm Baldwin thanks bud. I am doing just fine. Completely swamped with work . You need a good meal? Come on over I will feed ya.... 👍🏻😂

    • @malcolmbaldwin5735
      @malcolmbaldwin5735 4 года назад

      @@americaneaglepainting187 you're swamped with work because you can't bid for shet and you end up losing your shirt , lol swamped with 12 an hr work , congrads

  • @trappinout18
    @trappinout18 4 года назад

    What tool belt is that?

    • @okeefepainting1023
      @okeefepainting1023  4 года назад

      www.amazon.com/dp/B000RKLAM0/ref=twister_B01HDNMXOW?_encoding=UTF8&th=1
      www.amazon.com/Custom-Leathercraft-5024-Cordless-Drill/dp/B008QVXORG/ref=sr_1_5?keywords=clc+workgear+hook&qid=1582742534&sr=8-5
      www.amazon.com/Custom-Leathercraft-3505-ToolWorks-Large/dp/B000VKZUYU/ref=sr_1_6?keywords=clc+work+gear+belt&qid=1582742590&sr=8-6

  • @DJWRailroad
    @DJWRailroad 3 года назад +1

    For future reference, move mic closer or get a higher quality mic or just turn up the vol. Hard to hear or understand most of the vid (even with studio speakers, volume up), nonetheless, thanks for the feedback (or what we could hear).

  • @ev8318
    @ev8318 3 года назад +1

    great disk sander

  • @jhonnycharry4694
    @jhonnycharry4694 2 года назад

    Tiene velocidad variable