ANNOYING Fountain Pen Dry Out FIXED! Now Better Than Pilot 823
HTML-код
- Опубликовано: 29 сен 2024
- In my previous video of alternatives to the Pilot Custom 823 I identified the possible source of nib dry out on the Wingsung 699. This is how I fixed it
Pilot 823 VS Wingsung 699 & Asvine V126
• Too Expensive? Best AF...
Pens Featured in the video:
Asvine V126: s.click.aliexp...
Wingsun 699: s.click.aliexp...
Pilot 823: s.click.aliexp...
Join this channel to get access to perks:
/ @doodlebud
Video Details: • You Get To Help With U...
Want to support my channel without it coming out of your pocket? Use some of the links below next time you're buying any thing on Amazon or other online retailers listed below. Thanks for all the support!
Current favorite pen: Mag 650: goldspot.com/p...
Some of my favorite pens from Aliexpress:
Asive P20: s.click.aliexp...
Jinhao 9019: s.click.aliexp...
Jinhao X159: s.click.aliexp...
Jinhao 82: s.click.aliexp...
Wingsung 630 (steel): s.click.aliexp...
Wingsung 630 (14K gold): s.click.aliexp...
Majohn A1: s.click.aliexp...
Hongdian C1: s.click.aliexp...
Favorite Pen Case: s.click.aliexp...
Visit my Amazon Store (in progress)
My Amazon Store - Work in Progress
www.amazon.ca/...
Lamy Safari Amazon
amzn.to/3TYrwQV
Here's a list of the items I use to inspect, tune, and grind my nibs:
www.amazon.ca/...
A great fountain pen:
amzn.to/3BCEHgs
Care for some ink?
amzn.to/3uzL9kv
********************** DISCOUNT CODES **************************************** ___________________________________________________________________________________
Check out the weekly sales at Goldspot Pens
goldspot.com/c...
___________________________________________________________________________________
Canadian Online Retailer: www.blesket.com
Use code DOODLEBUD22 to save 10%
___________________________________________________________________________________
Save 10% when buying from Esterbrook pens by using the code
DOODLEBUD10
www.esterbrookpens.com
___________________________________________________________________________________
Save 10% when buying from Pen Chalet by using the code
DOODLEBUD10
www.penchalet.com
___________________________________________________________________________________
Save 20% when buying from Ensso but using the code
doodlebud
www.ensso.com/
___________________________________________________________________________________
SAVE 10% by using the DISCOUNT CODE: Doodlebud10 at checkout
kenroinkd.com
SAVE $80 on your xTool Purchase when you use the code XTOOLDO
xTool F1 Ultra - www.xtool.com/...
xTool S1: www.xtool.com/...
xTool D1 Pro 20W: www.xtool.com/...
xTool F1: www.xtool.com/...
#doodlebud #review #fountainpens
I was half expecting a lathe to appear out of nowhere, but this solution is really nice for us DIYers. Well done!
1. Success! You win!
2. To my eye the chamfer angles did not look identical?
Love the DIY setup, goes a long way to show you don’t always need the fanciest of setups if you use some ingenuity. Looking forward to the long term test results :)
What a terrific video! Love your 'handyman' approach! Just bought this pen. Keep up excellent work.
Great demonstration. I have not had the nib drying out. My concern has been whether there rod in the 699 actually seals the barrel. The rod wobbles a bit. Sometimes it seems to work, other times it just misses. Is there anyway you can stabilize the rod to seal properly?
Great problem solving idea.
Very cool that you were able to adjust the grip section to better fit the cap liner.
I love your fix it videos. Thank you
Funny, my Wing Sung 699 are all of them well sealed. I have 3. Keeps for many months without problems. Maybe this problem is batch-related? But I'm still grateful for this tip. GJ.
I have a Majohn A1 with poor sealing. It works great when in use, but a few hours later will have a hard start. How can I identify the problem?
Nicely done, great job with just some basic tools. PS: I had to giggle when I saw you confused the pens XD
My god, you really fixed the thing. It seens to be ok now. We are not sending a pen to the space!
Smart! Here I would have done some sketchy setup with a powerdrill but this seems quite a bit safer!
My Omas 360 also has problems with sealing and drying out. I wonder if I could do something similar with it 🤔
Nicely done. (If only you had a way to make a custom V-block for the job... 😉)
@@michaellew1297 I was tempted to but wanted to show a way that didn't require a 3d printer
That was great. I thought you would pull out a Dremel with some sort of taped wrapped dowel inserted into the section to hold it. I guess that might be more uncontrolled though. Great solution.
i was thinking that the liner was pushing back into the cap and not touching the seal lip anymore. i never thought it would be a messy chamfer! very cool, and happy autumn!
Wow, this is great! Definitely earned a sub. Thanks for the vid
This is a very interesting and informative video. As is so often the case, the devil is in the details. Many thanks.
Man this is awesome haha!
Knife sharpening tool!
Ooft! I think I would've cried if I were in your shoes 🤣 Glad you were able to get it sorted though.
I like your ingenious solution!
huh, good job.
good job