I love this part where are you pull up and they both drop down, love that little wiggle on the trailer I wouldn’t change a thing that’s just bad to the bone dude 👍👍😎
Back watching again the 30th 6:31 PM Monday. Can’t wait to get my trailer got some other goodies for it. Like the diamond plating aluminum doors two on each side of the trailer and the acrylic mirror for the top 😊going to be sweet
That trailer is really cool especially behind that hauler, but really like the trailer being able to lay out with the hauler a lot better. I’m still waiting for my hauler to come in.
Be cool to use a different radio .like on my airtronics mt4 .where you can run the servos that drop it use them on a lever or knob to control the speed of the sevos..basically slow them down so it lools more realistic...if this male's sense lol
Looks great Josh! 👍👍 Not sure if the shocks are oil filled or not but if they are oil filled you could try using a more viscous/heavier weight oil to help with the bounciness and lifting of the trailer. I'd say try using engine oil like a 10W 40 or something that should reduce how much it bounces but still dampen the movement.
Awesome work man, enjoyed seeing it come along to where it is. I got my light kits in today but didn't have time to install, will be a rainy day project tomorrow lol.
You can go online and look up for the team associated tc6 or seven torn car and you can go for their Springs their aftermarket Springs they're aftermarket Springs I think they're hard as is a nine or 10 lb spring parades I think they're highest now it's a 20
Awesome work, can’t wait to get one of these trucks and trailers. Where did you get the chopped body for the 30’s ford on the 2 post lift???? I wanna build a custom RC with a body like that.
Great video but I'd rather see how to make the Front Of the Hauler Hop instead of the trailer Or IF Noone can Make the Hauler Hop ill the the first RUclips channel to do it and make my Hauler Hop
I love this part where are you pull up and they both drop down, love that little wiggle on the trailer I wouldn’t change a thing that’s just bad to the bone dude 👍👍😎
Heck yeah beautiful junk, back watching again Saturday evening
Make taller lexan sides for the trailer. Then it'll look like it lays out fully.
Take rod ends off of shocks use medical tubing, or nitro fuel line and install under spring cup.. give yourself some more sprung tension for cheap.
Yes it does it looks pretty stinking freaking sweet I love it😊
Back watching again the 30th 6:31 PM Monday. Can’t wait to get my trailer got some other goodies for it. Like the diamond plating aluminum doors two on each side of the trailer and the acrylic mirror for the top 😊going to be sweet
That is Awesome !!! Good job !!!
Skirt drop extensions would look killer
Nothing wrong with that little wiggle on the trailer, Cheech and Chong would love it 😁😁👍👍😎
That trailer is really cool especially behind that hauler, but really like the trailer being able to lay out with the hauler a lot better. I’m still waiting for my hauler to come in.
Such a nicer rig than the Traxxas hauler. Pretty cool to make the trailer drop like the truck.
Heck yeah I’m here watching
That thumbnail is so perfect. Love it man. lol=be all of it as always.
Nice! Some really heavy oil will tame those trailer shocks
Looking good!
Back watching again Josh, December 20 4:56 PM Wednesday,
Mod science!! Showing your age with that GI Joe reference lol
Wish redcat sold in the uk, i would order one right now. Looks awesome 👍🏻
I gotta get one of these to put behind my redcat gen8 to haul my Shinsei 57 Chevy from 1982
Very nice ...
Perfect results in my opinion! However, I know your standards are much higher than mine, Josh! Awesome work, as always!
Love watching this stuff man! This is a part of the hobby I'm not really into and it's fun to live vicariously through your projects :-)
Looks awesome!
I’d go with some Reefs 777 direct power servos and use a separate battery to power them. Should be plenty of power for that weight.
Hell Yeah Brother 🇺🇸🦅
Hell ya, that's awesome
Be cool to use a different radio .like on my airtronics mt4 .where you can run the servos that drop it use them on a lever or knob to control the speed of the sevos..basically slow them down so it lools more realistic...if this male's sense lol
Looks amazing!!! Nice job!
Looks great Josh! 👍👍
Not sure if the shocks are oil filled or not but if they are oil filled you could try using a more viscous/heavier weight oil to help with the bounciness and lifting of the trailer. I'd say try using engine oil like a 10W 40 or something that should reduce how much it bounces but still dampen the movement.
So badass
That is just awesome dude, I would love to get my trailer to do that
Awesome work man, enjoyed seeing it come along to where it is. I got my light kits in today but didn't have time to install, will be a rainy day project tomorrow lol.
Oh man! Mine are due in Monday. But I just started tearing the body apart🫢😬 time for a repaint I think
@RCeveryday I'm gonna leave the stock one alone, I wanna get a clear slate to start from lol.
I did too. But I already scratched it😂 so here we go. Lol
Just awesome man maybe open the wheels a hair literally 1 m maybe 2 butt damn man I love your builds
Love it man. Dig all your work
That's killer man gots to get me one of the ratrod rtr
Dude I just got work looks good man seriously add your patina now and light s
You gotta try Shift Rc servos
Awesome job! What if you moved the mount that is on the axle so that it is in-between the shock and the 4-link rod?
Really cool awesome job what about putting a sway bar on the trailer if it’s possible
That could help it out, maybe one off an x-maxx or something even, would be about the right width
I was looking at the cen ford it’s not wide enough so yes max would work too cool vid you made
Your work is awesome. I would like to be able to afford the truck or trailer.
You can go online and look up for the team associated tc6 or seven torn car and you can go for their Springs their aftermarket Springs they're aftermarket Springs I think they're hard as is a nine or 10 lb spring parades I think they're highest now it's a 20
It would prolly lift almost any rig with some reefs Raw 500s under the truck and trailer. But shew over 400.00 bucks just in servos 😮
Direct power servos in the extra battery compartment? Looks amazing though bud 👌
Would a fsgt5 trans/receiver be a better for the air up/down using ch 5 as its potentiometer adjustable, an it would stop the drastic drop 🤷♂️🤷♂️
Love the way it sits!!!! are you going to paint it to a color of that era?
I’m planning on doing a patina job on it. Just not sure yet if I’m waiting for a clear body to start with first.
Awesome work, can’t wait to get one of these trucks and trailers. Where did you get the chopped body for the 30’s ford on the 2 post lift???? I wanna build a custom RC with a body like that.
That is a custom body my friend sells. Nightcrawlers3d on Facebook
Can you make new side panels so it will lay down to the ground
Great video but I'd rather see how to make the Front Of the Hauler Hop instead of the trailer Or IF Noone can Make the Hauler Hop ill the the first RUclips channel to do it and make my Hauler Hop
Lol, good luck