How to Fix Drywall Holes and Damage Around An Electrical Outlet Box | Step By Step Repair!
HTML-код
- Опубликовано: 27 янв 2022
- In this video I show you how to easily fix a drywall hole around an electrical outlet box that was caused by the box being overcut or damaged. Happens more often than many think.
Items and Tools Used:
DAP Fast Dry Premium Spackling amzn.to/3Gl5VYR
Putty Knife Kit: amzn.to/3H7WnS8
Drywall Joint Tape: amzn.to/3o4Mm0w
4" Paint Roller Kit: amzn.to/3r69yNG
180 Grit Sanding Block: amzn.to/3o6NQXV
2X2 Drywall Patch Sheet: low.es/33QDNzC
Utility Knife: amzn.to/3o53KSE
Thank you for watching and for subscribing. You can support the channel at no cost to you by using one of the above affiliate links. This helps support the channel for new content!
Blessings,
Adam
How To Home assumes no liability for damage or injury. How To Home highly recommends using proper safety procedures and professionals when needed. Our content is for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not How To Home. How To Home will not be held liable for any negligent or accidental damage or injury resulting from equipment, tools, electrical, fire, electronics or any items contained in this video. Attempt projects and repairs at your own risk. 
Хобби
I hope this was helpful! If you have any questions or comments, feel free to leave them here!
This is perfect! Exactly what I needed. I have a new home, and there are a number of outlet boxes just like this. 👍 Now I just need to figure out how to match the paint...🤔😅
Verify informative. I enjoyed your demeanor. I consider myself a master handyman “LOL “. I’m not to proud to say I’ve learned from your video and now my repairs will be more professional. Thank You for a great video!!
Awesome! Really glad to hear it was helpful. We are all learning, myself included. Thanks a lot for the feedback!
Thank you!
I would cover the receptacle box with painters tape while I’m working but you did a great job of keeping it clean. Great video. Thanks for making it.
Absolutely! Thanks for the feedback!
@@HowToHomeDIY your videos helped me do many things around the house. Thanks again.
Excellent
This is a perfect how to! Thank you!
You are very welcome! I am glad you liked it. Thank you for the feedback Maria!
Beautiful. I need to up my drywall repair game!
Thanks! Glad you liked it. It is pretty easy, you can do it!
Thanks for sharing!
You are welcome! Glad you liked it. Thanks for the feedback!
great video!!
I am glad you liked it! Thanks for the feedback! 🙂
Thank you very helpful 👍🏾
You are welcome! Really glad to hear it was helpful for you. Thanks a lot for the feedback!
Easier way is to pre-cut the drywall piece (larger than the damaged area) and then trace the piece over the damage. Cut out the traced area and install the pre-cut piece.
I use almost the exact same method. A few suggestions. I only use plywood, the short length regular wood will split easily, 1/2” minimum. I bevel the sheetrock on both side (the original and the new Sheetrock) so more joint-compound can go in between. I only use hot-mud (the white powder you mix with water, hardens in a short time per package), never the Ready-mixed (too soft, breaks too easily).
Since he cut out so much extra drywall, I would have done a three sided California patch (butterfly patch) with an inch of paper overlay. No need for mesh!!
Lot of people live with the little hole because the repair area ended up so much larger and now you have to paint the entire side of the wall if you want a professional looking job.
I've had really good luck using expanding foam to fill in the hole and mud over it.
I wish I started watching your shows years ago.
I use this method a lot but for that small area I would have used a self adhesive drywall patch with durabond 90 over it first then slightly thinned plus 3 to feather in. Between durabond and plus 3 I’m sure will be more than strong enough!
Thank you
You are very welcome!
We would normally do this but found the pieces of wood would often split as yours did at the top. Sometimes the split would come when we were putting in the last screw into the middle causing the wood to separate fully and fall down into the wall, then we'd have to start over again. We recently found drywall repair clips that forego the piece of wood but otherwise work the same and work very well for small or larger holes that need fixing where you'd need a much longer piece of wood. If someone needs to go buy drywall to make a repair, they should find the inexpensive clips in the same area.
Pre drill your screws…
Use plywood - it won't split.
Excellent! Subbed!
If available, I'd use an endoscope (mine is the Depstech DS300) to look for hidden wires before sawing into the wall - "Better safe than sawy" ; )
Very, very helpful to a female DIY'r. Thank you
The sparkle is the quick set 5, 20 or 45 minutes?
Spackle isn't that kind of compound. It's premixed and typically used for small repairs because it's fairly weak. It sands easily.
1. Your wood backer. You split it at top so it not really holding tight.
2. Cut drywall 1/2 inch bigger at 45 so outside hole is larger than inside. wall cut so a matching drywall cut at a 45 overlaps. More strength with 45 cuts.
3 also scene where people make patch 45 cut thur all but paper and cut paper bigger. Ie. this shape.
__/---\___
Cutting accurate and matching 45s sounds difficult, and I'm not sure it buys that much in the end. Do you mean to do that instead of using a backer?
@@grantcivyt The "backer" is the wood piece.
All he had to do with this type of electrical box, was to remove the box. Then attach a string to piece of wood or drywall and stuff it behind the hole area after putting spackle between the support piece and the rear of the broken area, than pulling the string through the hole in order to support the back piece and cover the hole with spackle. After it drying then cut the string and sand. 🤷♂️
2:19 You could have "fixed" it by replacing the 2-gang box with a 3-gang box 😄
No thanks 😂
Anyone else cringe with an added step to score and snap?
I hate looking at this repair just use some 5 minute mud and some paper sand and done