Dewalt 15 Amp 13" Planer REVIEW! (DW735)
HTML-код
- Опубликовано: 31 дек 2018
- Buy Here homedepot.sjv.io/39XOMdewalt
Today we are reviewing the DEWALT 15 Amp 13 in. Corded Planer
3-year limited manufacturer warranty
Material removal gauge
Extra large turret depth stop
The 13 in. thick Corded Planer from DEWALT provides excellent surface finish with a 3-knife cutter head that delivers a 30% longer knife life and makes changing them out more seamless. Its powerful 15 Amp, 20,000 RPM (10,000 RPM cutter head speed) motor executes 96 or 179 cuts per in. for a quick and efficient solution. It handles larger cuts in wider materials with ease.
19-3/4 in. cast aluminum base that is 2x more rigid than a standard 10 in. base and folding tables
2-speed gear box that allows users to change the feed speed for optimal cuts of the particular material with which you're working
Fan-assisted chip ejection vacuums that chips off of the cutter head and exhausts them out of the machine
Automatic carriage lock that reduces the movement that causes snipe
Extra large thickness scale that delivers accurate cuts with every pass
Extra large turret depth stop that allows you to return to your most frequently used thicknesses with ease
UL listed
Video was great! Voice over very informative. I'm getting ready to buy a planer and you answered my questions. I appreciate all the hard work you put into this video. The music? No, nope, caused me anxiety. What? No I'm not crying. That's sawdust!
Great video, very thorough, quick pace, and detailed, best DW735 video I've seen yet !!
this thing is amazing. I really appreciate that detailed review and walking through the internals. now to just save some money!
Yeah it's an absolute beast buddy. I appreciate the awesome comment too!
3 years later….did you save the money up yet? If not you could do like me and just buy it with your grocery money, then boil the wood chips it makes….I’m telling ya a little salt and sugar and it’s darn close to steel cut oats 😃
@@djjinerson I for one can respect the dedication of this reply! I did save up and bought this exact one with tables. The kids wouldn’t know the difference you say? I’ll have to give it a try.
I have one its a time saver for sure. Have to say it's my favorite tool in the shop.
I just bought one with the mobile stand and in/out feed extensions. My first project was some glued up cedar that was a little less than flat. Ran it through and it came out perfectly flat and smoothe as could be. My only regret is that I wish I had more material to send though. It is so enjoyable to use!
Nice video, I purchased one just the other day, however, it would benefit those who have not used one before, to see how you will go about adjusting the planer for a given piece of work, walk them through, step by step.
Thank you !!
Just got one of these last week... Ordered the shelix head for it. 26 WEEK (yes, not a typo) backlog. Even on the lux cut its a 8-10 week. Insane.
Good vid. I've had this DeWalt planer for two years and it works to my satisfaction . I think you were referring to the "feeder shelves" not a folding table as I was confused at what you were trying to explain. I will say, you have to keep it cleaned out especially if you are running a lot of coniferous wood as the sap will build up on the rollers and blades but it's easy to keep clean. Thanks for sharing and Happy New Year.
Yeah, home depot and Amazon has them listed as folding tables, but either or I need a set. Thanks for the comment and happy new year William!
Just got my 735x today!!!!!!!!!!!!!! So awesome! In Oklahoma we have high winds a lot. That aluminum patio furniture won't last 6 months. Either cast iron or wood is all you can really use here. Now I can make all my patio furniture out of wood!
My husband just got me one for my Birthday....i love it!
I finally got one after many years waiting to see if I’m serious (I use my hand planer all the time). This video was perfect since I forgot about how many great features 👍 I liked the 735 for. Thanks for explaining in this down to earth video. Time to make some chips. Ready to go.
Than you so much for the awesome comment Robert. Go make some chips bro👊
First of all happy freaking New Year's bud you are very talented with a wood-burning I like to see you do a program on that I'm impressed take care of your wife and kids for the new year let's hope your channel grows
Happy new years KONAMAN! Yeah, I would like to get a nice wood burning set. Could do a lot of cool things with it
Just picked this up. Really excited. It was expensive, but I’m to the point where I’m hand planing everything and it’s not practical anymore
This thing is a beast , I built a makeup table for a customer out of zebra wood and it did a outstanding job. Good vid hoss......
Hey Donny. I read a few negative reviews on the depot site saying this wasn't powerful. They must be running full size trees through this thing, cause it is definitely a beast bro. Thanks for the comment
I just bought a DW735X and it’s awesomeness! Yes!!!
I bought this from Home Depot, and it came with the feed trays, and an extra set of blades.
I'm getting ready to buy this. Does it already have blades installed with a extra set of blades in the box or does it just come with one set ?
I see the have one for 629.00 and looks to be planer only and the other for 679.00 with blades and tables
I think you should send that down to me @tool review zone so that I can second your review. Not that I don’t believe that the DeWalt planner isn’t a BEAST, cause it really is. I will just want to make sure your viewers get a second opinion....LOL. Another great review BRO!!!!
Haha, your such a thoughtful person Eddie. Tell you what buddy, when you come up to Ohio and finish my basement in that charred wood finish, I'll let you review it 😏
I used a two staged dust collection and run the second suction unit. The motor of the 735 heated up and eventually quit working. I rebuilt the motor with new armature and field also known as a stater with new brushes ran it for only hour and a half and again the motor heated up and fried. Is running the two stag blower causing the planer motor to heat and burn? Over two hundred bucks spent and now I'm without any knowledge of what went wrong. Any input ?
Now that is a monster Happy New year Clint /trz hope you had a wonderful and safe New year's Eve
Thanks buddy, you too!
Awesome review m8 .And happy New year
Thanks David, and happy new years to you too buddy!
Got my 735 today, and building a table for it tomorrow. Then comes countertops and baseboards for the home improvement project. Yeah its expensive but its about to pay for itself in saved time and effort.....
Very impressive
Just got a Dewalt 735x and it had a double crack on the corner of the base. I've seen this same complaint before. Don't know if it's a production issue , or poor packaging, or if it's too heavy for the UPS person and they dropped it , or what, but it's being sent back. I could see that the box had been opened before and resealed rather sloppily, so I guess someone else had already returned it before they sent it to me. I'm really disappointed and leery about ordering another one. Larry Long
Ya. I've got the 735 had nothing but issues with it. Bought a 734 and it's performed great. No issue's. The 735 is stuck underneath a bench collecting dust. Worst purchase ever. Should of listened to all the complaints about it
Great Great Great Video! Outfeed table setup correctly will help that snipe
Yeah I definitely think it will. They are only $49, so really not that bad at all
Tool Review Zone I have that setup and actually set it up on the DeWALT Heavy Duty Miter Saw Stand DWX723. I replaced the standard supports with the large rollers. This allows for long stock in-feed & out-feed support. The machine & stock travel parallel with the stand. If I could only send you a picture...
My email is toolreviewzone@gmail.com. would love to see it Brown
Tool Review Zone I hope you got the email?!!
Hey bro, I haven't had a chance to look yet, but I did get it. I have the folding tables coming in this week, and will see what I can learn from you pic. Will check them out tonight and let you know buddy
Great video
I own one and after having some problems planing cherry I cleaned the bed and rollers and ran the cherry through it and still had burn marks. I reduced the depth of the cut but it helped very little after a few passes the dewalt would trip the breaker. I at this point I am not a big fan of it.
Good video…. However if you get the in feed and out feed tables and (adjust them) correctly, you will NOT have snipe on either end.. I ended up buying a WEN planer stand on Amazon for $160. It’s well worth it and has adjustable extension rollers on both ends.
That thing is a beast Clint! Great review! That's a pretty clever dust collection system Renaissance Man built!
Yeah it's an awesome tool Brandon! And yeah, it's like genius level of thing there lol
We bought ours because we're going to use reclaimed wood in our projects.
Claude…..the soothing background music you chose for this review matches the gentile, sweet, soothing sound this planer makes…..just got mine….1000% Toolie approved 👍 It’s a nuanced product for nuanced people like us….something Vance and his Neanderthalic group the Very Cruel Gang wouldn’t understand….I’m sure they would try to use it as a giant yeller hammer 🤣
I this is the next tool I want to buy
Its awesome Renato. So many projects that can be completed because of it
Been wanting to get one of those bad boys
I'm loving it Daniel, but I definitely need to take ten man's advice and figure out a collection system asap
Yo @toolreviewzone you think this guy is still a go to for new woodworkers?
Nice!!!...wouldnt mind getting one of these.
Its awesome Raj!
+Tool Review Zone Hey are you getting to keep it??
Yes sir
Hi im in the uk and i wondered if you could answer this question for me. im in a storage unit with no power and i use it as a workshop.
all my tools are cordless dewalts, could you tell me if the dewalt 1800 power station can power this thickness planer?
How do you do the sides on the wider ones? Or is it just sanding it by hand
That is a nice planer I have been looking at the ridgid bench top planer to buy and it is cheaper than the dewalt
Yeah it's a bit cheaper for sure Richard. I haven't tried the ridgid yet, but hear good things
This was an awesome review.
Are you still using this one? Was thinking about getting a 735X
awesome planer, I've been looking at these for future purchase, also wen has one that looks good.
Yeah I haven't tried the WEN, but seems to be a good price for what you get.
Great Great Great Video!
What's up Brown! Thanks so much for the comment buddy
I love mine, although I cant usually wait to turn it off because its so loud.
Yeah, definitely not quite 👊
SMOOOOOOOOOOOTHness. Every planer. WTF are all these reviews? Is this a sponsored add?
I LOVE MINE!
How’s the snipe comparison to the DW734
Have to be honest Noel, haven't tried the older model, but with the folding tables on this, it helps a lot if you run the wood in with a bit of a slant. Almost eliminated the snipe after doing that
Genuine effort- A huge red flag is the lack of safety: planning anything on a folding table is extremely dangerous bordering on madness, & having long sleeves near something with auto feed can lead to an extraordinarily lifelong hand injury-- there was a gentleman that lost his hand due to an auto feeder on a machine: his screams could be heard for miles
Thailand
Uhhh..."Shift only when machine is running."...?
Yes it tells you this in the manual
@@ToolReviewZone I only mention it because while you were showing it and talking you were shifting it back and forth and the close-up was showing the words printed on the machine about when only to shift it. It was kind of funny. Love the work you guys do.
@@choimdachoim9491 lol, no worries and thanks for the feedback choim!
Looks like the take off gauge is set up to show maximum take off cut per width of board to possibly keep from over loading machine.
Any issues with overheating and popping the built in breaker? I returned the first one due to that issue and bought a second one thinking I had a defect. The second one also overheats on me after running several 6ft boards of 3.5 in pine. It's very frustrating that it pops the breaker after several passes. This occurs even with removing only 1/64 at a time.
Wow really? I haven't had any of those issues and I use this constantly.
Manuel Felix its not the machine brother.....gotta have it plugged into its own outlet...with nothing else drawing from the outlet and use no more than a 50 foot cord with a 12 gauge cord......in between a really fat cord 10 gauge...and a regular thin cord 14 gauge....you'll plane all day