DAF HGV Automatic Truck Gearbox Tutorial On How To Shift Gears In An Automatic HGV Truck Walkthrough

In this DAF HGV Automatic Truck Gearbox Tutorial, we'll show you how to shift gears in an automatic HGV truck. This tutorial is perfect for anyone who's interested in learning how to shift gears in an automatic HGV truck!
If you're new to driving an HGV truck, then this tutorial is for you. We'll walk you through the steps necessary to shift gears in an automatic HGV truck.
This Short HGV Automatic Gearbox tutorial is a great way to learn how to shift gears in an automatic HGV truck, and it's sure to be helpful on your road to trucking success!

[@LongtowchisembeleChipepo]

My daff cf 75.310 is failing to engange just bricking Neutral (N) what could be the problem?

[@truckerstuff]

Hi there !
It sounds like you're experiencing an issue with your vehicle's transmission, specifically with engaging gears other than neutral.
Here are a few potential causes I think may cause this problem:
1. Low Transmission Fluid:
Check the transmission fluid level and quality. Low or dirty fluid can cause the transmission not to engage properly.
2. Transmission Linkage:
The linkage connecting the gear shifter to the transmission might be misaligned or damaged, causing it not to shift correctly.
3. Clutch Problems:
If it's a manual transmission, the clutch may not be disengaging completely, making it hard to shift gears.
4. Internal Transmission Damage:
There could be internal damage within the transmission, such as worn gears, bearings, or other components.
5. Electronic Issues:
Modern vehicles often use electronic sensors and modules to control the transmission. A fault in these systems (like a bad sensor or wiring issue) can cause engagement problems.
Please NOTE: It's advisable to have a professional mechanic diagnose the issue since transmission problems can be complex and often require specialized tools and knowledge to fix.

[@LEATR72-500]

Let me turn on the light *click* WHY IM I REVERSING ON THE HIGHWAY

[@truckerstuff]

Things can happen, but it's not possible to during driver switch from D to R and start revising 😄😁😆😅

[@LEATR72-500]

@@truckerstuff yeah thats good or else well

[@LEATR72-500]

Im sure they have a system to stop you from going full reverse on the highway

[@adrianrubi5012]

Looks easier than in an automatic sedan?

[@truckerstuff]

Nowadays, I would say everything is easy. back in the day I remembered we handed 12 gears top gearbox and bottom gearbox and half's, when you was loaded you was going: 0.5 gear, then gear 1, then 1.5 then 2, then 2.5 then 3, then 3.5, then 4, then top gearbox and then 4,5 up to 12, every mountain every roundabout traffic jam was Stickland, it was fun, now,,,one bottom and off you go.

[@abuchipatrick2670]

Your voice is not clear what are you saying?

[@truckerstuff]

@abuchipatrick2670 Thanks 4 letting me know. Next time, I will try to do some voice-over or something. Thanks.

[@truckerstuff]

@@abuchipatrick2670 truck gearbox
Neutral, drive, slow forward, reverse, slow reverse