I fitted the 50mm top end to my 365 and ported it and decked it to .5 mm squish, opened the muffler up and it fly’s pulling a 30 inch bar in pine. When sharp and setup right it will hold its own against the 90's but as soon as it starts to go dull the 90 will kill it. All a bit of fun, ideally with the 20 inch bar on it screams through larger branch wood and it’s defiantly quicker than a stock 390 by a small margin. That said last year I turned up to a working bee with my little saw as the other guys said they had big saws. One guy had some big old Poulan and the other a 365 the same as mine. The Poulan had a 36inch bar and was dog slow. So I fitted the 30inch to mine and effectively ringed up two 6 foot butt end pines. By the afternoon I was cringing thinking how long can this thing keep this up. I took 10 liters of gas and burnt that up and started into one of the others (nervously) That thing must have got through 13-14 liters working its guts out with out on that big bar without skipping a beat. There was no comparison between my saw and the stock 365. All that said this season I want a 390, I like the way they run.
+Bugger That The 390 is great. IF you can wait to find a good used one you stand to get it for about $500 like I did. One thing I don't particularly care for is the chain tensioner but if your careful tensioning it wont be a problem.
I have HUSQVARNA 365 special.It is relatively new.On the decompression valve and under have little oil and carbon. Anyway,It seems that chainsaw work normal and the compression is good... I don't use decompression valve for starting..Sorry for my bad english.Thanks for your answer...
390 385 576 575 365 371 372 west coast big dogs is what they take I just put them on they are bigger then stock 395 dogs and work great and I have 395 394 and I don't think the dogs are the same
это не цирк , а сравнительный тест меж оригинальной хускварной 365 с поршневой 48мм и китайским клоном с поршневой в 52 мм .. видно , что клон немного , едва заметно , уверенней пилит
I have owned a 365 standard for 15 years and wouldn't swap it for anything else ,they are simply the best
yes coming
I fitted the 50mm top end to my 365 and ported it and decked it to .5 mm squish, opened the muffler up and it fly’s pulling a 30 inch bar in pine. When sharp and setup right it will hold its own against the 90's but as soon as it starts to go dull the 90 will kill it. All a bit of fun, ideally with the 20 inch bar on it screams through larger branch wood and it’s defiantly quicker than a stock 390 by a small margin. That said last year I turned up to a working bee with my little saw as the other guys said they had big saws. One guy had some big old Poulan and the other a 365 the same as mine. The Poulan had a 36inch bar and was dog slow. So I fitted the 30inch to mine and effectively ringed up two 6 foot butt end pines. By the afternoon I was cringing thinking how long can this thing keep this up. I took 10 liters of gas and burnt that up and started into one of the others (nervously) That thing must have got through 13-14 liters working its guts out with out on that big bar without skipping a beat. There was no comparison between my saw and the stock 365. All that said this season I want a 390, I like the way they run.
+Bugger That The 390 is great. IF you can wait to find a good used one you stand to get it for about $500 like I did. One thing I don't particularly care for is the chain tensioner but if your careful tensioning it wont be a problem.
PP
PP
I have HUSQVARNA 365 special.It is relatively new.On the decompression valve and under have little oil and carbon. Anyway,It seems that chainsaw work normal and the compression is good... I don't use decompression valve for starting..Sorry for my bad english.Thanks for your answer...
👍💯💯
I like the 365xp there alittle forgotten over the 372xp which I have but my next one is a 365. thanks
ruclips.net/video/HdnZi4kLvok/видео.html&lc=z22jg1mbtwjyzt2syacdp432fioy4kabbeugjsryebtw03c010c
Never push the saw in to the timber.the weight of the saw should go down through the timber itself.
this is hardwood, even with a brand new chain you need to push down
I'm my opinion some felling dogs off of a 395 would help a lot, especially in big wood like that. great mod though!
390 385 576 575 365 371 372 west coast big dogs is what they take I just put them on they are bigger then stock 395 dogs and work great and I have 395 394 and I don't think the dogs are the same
Hi, I was wondering what the power output increase would be (365 special to 52mm big bore kit) - roughly.
red gum?
Super
Una maquina la husquerna 365
ruclips.net/video/HdnZi4kLvok/видео.html&lc=z22jg1mbtwjyzt2syacdp432fioy4kabbeugjsryebtw03c010c
whats the wet shit comming out of the red gum while you cut it - i noticed it when cutting red gum ages ago
That truly hard wood or a dull chain?
Husqvarna👌
Este tipo ta loco el problema noes la maquina sino la cadena
Kayu apa ini sangat merah warnanya
So, is the Huztl saw completely Huztl? Meaning cases and all or just the top end?
thanks!
Jó jó pihenést km ml PM PM okkkko km klkkogguwsss ön inkább hhbjk km jó jkkkkj ön állítólag stggttzgg
3:46 is the chain too loose?
Yo pienso q la cadena le hace falta mas filo
How to change a sping 395×p
Треба ще раз подивитись, бо я тебе щось не поняв
Which was stock and which had the aftermarket kit?
Stock has Husqvarna stickers.
@@lilsquirter1 140 psi good compresion 372 xp ?
@@lilsquirter1 oil mix 1:33 ?
27 September 2022
Are the carburetors of these two chainsaws the same or different?
Husvana ngon hơn ..👍
le falta filo
Нидели за две перепилиш молодец а если хочеш быстрее купи шину и цепь и так по2 .3 менуты каждой пелой и пели всеравно делать нечего щесливчик
Кто скажет...о чем фильм???
Like
man you are hard on your equipment, just throwing them around and not taking your time swithching the bar out
Наточи цепь валенок! Струшка мелкая летит она перетирает а не пилит...
Джафер Гавджа дерево твердое и сухое. Это нормально даже с новой цепью
Да цепь то нормальная,но все равно даже мощности 365 хуски не хватает чтобы быстро перепелить такое огромное полено
las motosierras es una máquina para cortar Árboles viejos
Cadena con poco filo
BISUsk hamare pass Aisa sem tu sem machine hai Teri padhaai
x
thang nay cat kem
I cant see any difference at all.....
La moto noes el problema es la cadena q no tiene filo. Creo q es novato jaja
И ЧЁ ???
Шпиль лучше, кто согласен ставьте лапки 👍👍👍
@@ДмитрийГнедашов-э2ч brew em ,o\txYb
Remo
U
Ankhang Nguyen povesti pentru.copii
brah
Hu;y
че за цирк
это не цирк , а сравнительный тест меж оригинальной хускварной 365 с поршневой 48мм и китайским клоном с поршневой в 52 мм .. видно , что клон немного , едва заметно , уверенней пилит
Popišaj se na obe
Made in Sweden
Aapka mobile number hoga to SMS kijiye aapke sath baat karna hai message ke bare mein aapko SMS kijiye aapka mobile number
Le falta filo