TP link needs a better video on this setup that includes Ethernet backhaul. I have two AX1800s, but I imagine most "EasyMesh" compatible devices work the same since it's in the TP Link firmware. Different models should also mix and match due to this, as long as they say "EasyMesh" and have updated firmware. First set up one as a "main" standalone router to connect to The Internet and then go into it's setting and force a firmware update. Next, shut off that one and repeat setting up each additional one as if it will be the "main" router so it connects to The Internet and force it's firmware update. Once all your devices have updated firmware, the "EasyMesh" feature kinda does what it says on the tin (I tried this without doing the firmware update and it didn't work, which is why it's easiest to just set each one up as a "main" router to update it's firmware then reset them later ). You set up and connect your "main" device while all the other ones are disconnected and powered off, use the web interface or phone app on the main device, find the "EasyMesh" settings (it's in advanced on the web interface), tell it to add a satellite, either connect the Ethernet cable to the 2nd device (LAN port to LAN port, not the WAN port) or use the WPS button on the main router and then power on and immediately factory reset the "satellite." After a couple minutes, the "satellite" should have reset and been found by the "main" device. Repeat for other extender/satellite devices. If you do all the initial setup with everything right next to each other, you should be able to set them all up and then unplug the "satellite" ones and move them to their new location throughout your house.
السلام عليكم دكتور... شكرا على هذا الفديو الرائع.. راح احاول ابدي هذا الكورس ان شاء الله اذا لكيت هاي الادويه بغداد بس دكتور بلا زحمه يصير اخذ كورس بدون ما أعرض الادويه على دكتور.. لان هنا اغلب الأطباء الادويه مختلفه من دكتور إلى آخر
Hi @KB1QYH, i'm using main router tplink AX73 & just bought new AX55,firstly i need to updates firmware,during this i need to set it as AP mode & using LAN cable to connect with main router,to access the internet.2ndly updates the firmware on the settings mode. Then, just follow as this video mention after complete firmware updates.Tried using LAN cable for wired backhaul but it wont work. Think that this auto settings ONLY supported wireless backhaul....maybe TP Link will updates their firmware later for manual selection mode of backhaul options..But still i'm quit statisfied with their product for now.
@@mohamadimranbinibrahim8405this won't work for me as the signal is too weak if I change it to AP mode it is then on 2 seperate networks which defeats the object and is not onemesh/easymesh
@@mohamadimranbinibrahim8405 so your AX55 is wirelessly connected to the AX73? Because I just buy AX55 and wanna connect it to my main router AX72 but I need connect it via lan cable, not sure if wifi will reach my point I need but I have cable there and I wanna use mesh system.
I have an Archer A6 and a C5 router. I can dispose of one but not both. What would be the better setup for improving Wi-Fi coverage and performance: adding a wireless extender to my existing Archer A6 and C5 routers, or replacing the older C5 router with a new one while keeping the Archer A6? Please respond
Hello I need to connect 2 AX 55 routers together for easymesh and understand one has to be in satellite mode, but can I connect it via ethernet cable if so how? Ie should it connect from lan socket main to lan or wan on satellite?
@@TPLinkMalaysia1 I conected wiresly but there is no function to link via LAN. Router and sattelite router are conected vid LAN ports. How to set it up via cable?
what do you mean by ethernet backhaul? after you pair the 2 unit you can connect them with rj45- and expand the cover - No? i want to but a 2nd unit- it will not work with cable?
What a load of rubbish. I don't want to use a mobile phone app. I want to configure my two routers to bypass my plusnet router. It has cloned the bt plusnet router and stopped all my file sharing. I have now had myy whole network spied on. Thanks a lot tplink.
2x Archer A6 works perfect. Now I have much better coverage than before on N600.
Can I connect 2 routers by mesh or only second by amplifier?
By mesh
TP link needs a better video on this setup that includes Ethernet backhaul. I have two AX1800s, but I imagine most "EasyMesh" compatible devices work the same since it's in the TP Link firmware. Different models should also mix and match due to this, as long as they say "EasyMesh" and have updated firmware. First set up one as a "main" standalone router to connect to The Internet and then go into it's setting and force a firmware update. Next, shut off that one and repeat setting up each additional one as if it will be the "main" router so it connects to The Internet and force it's firmware update. Once all your devices have updated firmware, the "EasyMesh" feature kinda does what it says on the tin (I tried this without doing the firmware update and it didn't work, which is why it's easiest to just set each one up as a "main" router to update it's firmware then reset them later ). You set up and connect your "main" device while all the other ones are disconnected and powered off, use the web interface or phone app on the main device, find the "EasyMesh" settings (it's in advanced on the web interface), tell it to add a satellite, either connect the Ethernet cable to the 2nd device (LAN port to LAN port, not the WAN port) or use the WPS button on the main router and then power on and immediately factory reset the "satellite." After a couple minutes, the "satellite" should have reset and been found by the "main" device. Repeat for other extender/satellite devices. If you do all the initial setup with everything right next to each other, you should be able to set them all up and then unplug the "satellite" ones and move them to their new location throughout your house.
Does the TP-Link Archer AX55 do EasyMesh Ethernet Backhaul ?
السلام عليكم دكتور... شكرا على هذا الفديو الرائع.. راح احاول ابدي هذا الكورس ان شاء الله اذا لكيت هاي الادويه بغداد
بس دكتور بلا زحمه يصير اخذ كورس بدون ما أعرض الادويه على دكتور.. لان هنا اغلب الأطباء الادويه مختلفه من دكتور إلى آخر
گبينه شني
Great. Is there any example with ethernet backhaul?
The same just finally connect with rj45
Can I use a AX23 with a AX21?? I cannot get them to connect using the WPS button
How can I do this with ethernet backhaul using 2 AX55 routers?
Hi @KB1QYH, i'm using main router tplink AX73 & just bought new AX55,firstly i need to updates firmware,during this i need to set it as AP mode & using LAN cable to connect with main router,to access the internet.2ndly updates the firmware on the settings mode. Then, just follow as this video mention after complete firmware updates.Tried using LAN cable for wired backhaul but it wont work. Think that this auto settings ONLY supported wireless backhaul....maybe TP Link will updates their firmware later for manual selection mode of backhaul options..But still i'm quit statisfied with their product for now.
@@mohamadimranbinibrahim8405 so ax73 can be easymesh to ?
@@mohamadimranbinibrahim8405this won't work for me as the signal is too weak if I change it to AP mode it is then on 2 seperate networks which defeats the object and is not onemesh/easymesh
@@mohamadimranbinibrahim8405 so your AX55 is wirelessly connected to the AX73? Because I just buy AX55 and wanna connect it to my main router AX72 but I need connect it via lan cable, not sure if wifi will reach my point I need but I have cable there and I wanna use mesh system.
I have an Archer A6 and a C5 router. I can dispose of one but not both. What would be the better setup for improving Wi-Fi coverage and performance: adding a wireless extender to my existing Archer A6 and C5 routers, or replacing the older C5 router with a new one while keeping the Archer A6?
Please respond
Hello I need to connect 2 AX 55 routers together for easymesh and understand one has to be in satellite mode, but can I connect it via ethernet cable if so how? Ie should it connect from lan socket main to lan or wan on satellite?
AX55 can do that
from WAN Main → LAN satellite
Y una vez conectado a easymesh puedo conectar el main router por cable al satelite router para mejorar la cobertura?
Si
But nothing happens when I follow as described I can’t add my archer ax53 to archer ax23 at all to create one mesh. Any help would be appreciated
So have you figure it out mate?mine same problem
@@pizzwrldkun7659 To add the router, reset it, log in after reset, set it to satellite mode in operation mode, and then add it.
Can pair 3 router? Means.. 1 main 2 like setilite with out connect cable ?
Yes, you can link multiple in a EasyMesh network.
@@TPLinkMalaysia1can connect without cable each other?
it doesn't work at all. Both the WPS buttons on both my router did absolutely nothing.
same here
Hello there, please ensure you are updated to the latest firmware with EasyMesh feature added. Older firmware does not come with this feature.
@@TPLinkMalaysia1 I already updated, but I guess it is my have the problem, Philippines, I found out you got different firmware updates
hi! can i do the same process with two archer c80?
Will it work on archer c6 v3 and v4?
is this possible with 2 ax10s
hello sir, may I ask if the mesh features also support wired mesh instead of through wireless?
did u find anyuseful info about that ?
@@mohammedragab6311yes support wired also some routers for example archer c64, ax73
does this work with ax73?
Can ax53 form the mesh network with dlink covr1100?
From my understanding, the DLink router would also have to be easymesh compatible. If so, my understanding is that it should work
Can this be done with starlink router?
Yes, our routers are able to work with Starlink router.
i have the ax55 on my starlink gen2 router in my opinion it runs so much better
how to set up VPN on this router?
You can add vpn to the main router which applies it across the whole network it is under the advanced menu options on the ax55
Update firmware for ax73 please.
Is this directly connected to satellite?
Yes, the satellite mesh node is wirelessly connected to the main node.
@@TPLinkMalaysia1 I conected wiresly but there is no function to link via LAN. Router and sattelite router are conected vid LAN ports. How to set it up via cable?
june 2023 and it doesn't support ethernet backhaul, ridiculous shit
what do you mean by ethernet backhaul? after you pair the 2 unit you can connect them with rj45- and expand the cover - No? i want to but a 2nd unit- it will not work with cable?
@@user-fj7vx2in4b yes, the easymesh will not work if you connect 2 device by wired, that call ethernet backhaul (connect with cable).
Now it support you need to update firmware
@@jannur7777really? When they update it?
@@EsthersHouseI've got 2 archer c64 connected by easy mesh Ethernet backhaul. It's works
What a load of rubbish. I don't want to use a mobile phone app. I want to configure my two routers to bypass my plusnet router. It has cloned the bt plusnet router and stopped all my file sharing. I have now had myy whole network spied on. Thanks a lot tplink.