How To Replace Front Strut Assembly 2009-2017 Chevy Traverse
HTML-код
- Опубликовано: 21 окт 2024
- Buy Now!
New Strut Assembly Set from 1AAuto.com 1aau.to/ia/1ASS...
New Strut Assembly from 1AAuto.com 1aau.to/ia/1AST...
TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2009-2017 Chevy Traverse.
• Check here for more videos on the 2009-2017 Chevy Traverse • Chevy Traverse 2009-20...
This repair was done on a 2012 Chevrolet Traverse LT 3.6L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2009 Chevrolet Traverse
2010 Chevrolet Traverse
2011 Chevrolet Traverse
2012 Chevrolet Traverse
2013 Chevrolet Traverse
2014 Chevrolet Traverse
2015 Chevrolet Traverse
2016 Chevrolet Traverse
2017 Chevrolet Traverse
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oCc/1AX...
• 15mm Wrench 1aau.to/oii/1AX...
• 21mm wrench
• 15mm Socket 1aau.to/oB6/1AX...
• 18mm Socket
• 21mm Socket
• 22mm Socket 1aau.to/obW/1AX...
• 24mm Socket
• Strut Spring Compression Tool
• Trim Tool Set 1aau.to/ojC/1AX...
• Locking Pliers 1aau.to/obP/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/oEL/1AX...
• Socket Driver
• Socket Extensions 1aau.to/oB6/1AX...
• Torque Wrench 1aau.to/or8/1AX...
• Floor Jack 1aau.to/ojn/1AX...
• Hammer
• Jack Stands 1aau.to/oit/1AX...
• Ratchet Strap
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Chevy Traverse 2009-2017 1st Generation: • Chevy Traverse 2009-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Torque Tables ??
Thanks. I've been looking for a vid that had an example of the process of taking the spring and strut apart. H&R springs and KYBs going on this weekend. 😇
Torque specs
8:14 lower bolts
8:40 link
9:00 lug nuts
9:35 top nuts
I ended up changing both front struts and back shocks. Drove around and the Service Stabilitrak light came on. Checked for codes but nothing came out. Is there a trick to getting rid of that service light?
Thanks bud. You just saved me $1,234,987.67
They come together so you don't need to take spring off everything is new.
Your video helped alot. Thank you so much 😊
🎉🎉❤that’s a lot of steps
Hi changed my shocks all the way around on 2013 traverse today and everything went fine. Went to test drive and traction control light came on ! Any idea why or what I can do to remove it ? Thanks in advance
Followed directions. Pretty simple really. Test drove vehicle and stabilitrack and traction control warnings came on and couldn't drive over 20 or 25 mph??
Thanks