I take it that the 3 fans in the bottom are intake, 3 fans on side are intake, 3 fans on the other side of the case are exhaust, 1 fan on the back is an exhaust and the 3 fans for the radiator are exhaust. In short, there are 6 fans for intake, 7 fans for exhaust. ☆What is the ambient temp inside of the case? ☆ Decibel level while all 13 fans are spinning. Oh I forgot the PSU fan, 14 fans total ☆ Nice setup!!!
As long as the case has Positive Airflow should be good - best way to check -/+ flow, piece of 8x11 sheet paper, if the paper is sucked into the intake and stays without holding it - Positive Airflow, if the paper is pulled and not pushed by Outlets, you have negative Airflow. Will need to change your fan arrangement. Then when the case is closed you will have correct airflow and proper temp distribution.
@emilianofragosor9836 I'm assuming side intake, bottom intake, top exhaust, rear exhaust and if you have the front panel glass removed intake as well, I have glass front and left side but still stay everything under full load 55 c degrees
I have some issues with the build, first off don't use Kingston RAM (it's garbage), the white does not look good with the black, also, I would of taken advantage of the dual chamber and put the AIO in the back above the power supply, and yes you didn't show the riser cable, other than those main issues, it looks good.
Can not put both a rad and fans on back with putting case cover on. One or the other. However.. that is also pretty much its own zone and those 3 fans blowing directly on to the back of the motherboard helps with cooling cpu.
Im 3 months late to the HAF 700 evo case video, but why is my ARGB hub not in my Master+ software? LCD screen works fine, but no RGB from fans or front panels
hi thanks for the amazing video and congrats for the nice buil now i have a question for you i want the same box and im planning on buying the msi suprim luquid x 4090 you think i have enough space to put the radiator of the card in the side next to motherboard? or where else you will recomment ill have space to put it? thanks in advance
Вопрос один - зачем столько вентиляторов? Пользы от них никакой нет в таком количестве. One question - why so many fans? There is no benefit from them in such quantity.
@@ChristopherFlannigan Did you have to buy the pcie extension separately or was it included? Also is there something inside the box to steady the GPU? Or do I also have to buy it separately. Like a metal piece that holds it? I saw in the video that you get a frame for the sideway GPU usage with the package.
I take it that the 3 fans in the bottom are intake, 3 fans on side are intake, 3 fans on the other side of the case are exhaust, 1 fan on the back is an exhaust and the 3 fans for the radiator are exhaust.
In short, there are 6 fans for intake, 7 fans for exhaust.
☆What is the ambient temp inside of the case?
☆ Decibel level while all 13 fans are spinning. Oh
I forgot the PSU fan, 14 fans total
☆ Nice setup!!!
As long as the case has Positive Airflow should be good - best way to check -/+ flow, piece of 8x11 sheet paper, if the paper is sucked into the intake and stays without holding it - Positive Airflow, if the paper is pulled and not pushed by Outlets, you have negative Airflow. Will need to change your fan arrangement. Then when the case is closed you will have correct airflow and proper temp distribution.
@@KeyBoardCowboy2009 So what fan arrangement do you recommend if you have thirteen?
@emilianofragosor9836 I'm assuming side intake, bottom intake, top exhaust, rear exhaust and if you have the front panel glass removed intake as well, I have glass front and left side but still stay everything under full load 55 c degrees
How is the 4070 ti connected to the Motherboard ? there is no riser cable and you didnt show any PCI.e vertical mount at the bottom.
How's the gpu holding up without a holder?
I have some issues with the build, first off don't use Kingston RAM (it's garbage), the white does not look good with the black, also, I would of taken advantage of the dual chamber and put the AIO in the back above the power supply, and yes you didn't show the riser cable, other than those main issues, it looks good.
one more thing, you should've put the NVMe in the top slot near the CPU so you can take advantage of DirectStorage and/or RTX IO
are you using any vertical stand for the GPU?
This is late but I believe the case comes with a vertical and horizontal gpu stand
Do you think the three fans on the back of the motherboard make any noticeable difference to temps?
does deodorant work under 1 arm?.. lol
@@typerightseesightLel 😂
Meh i wanted to see the vertical gpu mount but you skipped it
Why.... those extra 3 fans behind the motherboard in the second chamber or whstever its called are absolutely useless
Its so you can put a radiator there not just fans.
Can not put both a rad and fans on back with putting case cover on. One or the other. However.. that is also pretty much its own zone and those 3 fans blowing directly on to the back of the motherboard helps with cooling cpu.
They are radiator fans retard.
hi, for the riser, do i need 200mm or 300mm ? thank you
What vertical gpu mount did you use?
😍😍 nice case
Yes, it looks great
Im 3 months late to the HAF 700 evo case video, but why is my ARGB hub not in my Master+ software? LCD screen works fine, but no RGB from fans or front panels
hi thanks for the amazing video and congrats for the nice buil
now i have a question for you i want the same box and im planning on buying the msi suprim luquid x 4090 you think i have enough space to put the radiator of the card in the side next to motherboard? or where else you will recomment ill have space to put it? thanks in advance
How did you get the vertical mount the ones i see online dont have a vertical mount
Shame you didn't show the fan controller.
Lian li o11 style again?
Yes, looks very similar
Вопрос один - зачем столько вентиляторов? Пользы от них никакой нет в таком количестве.
One question - why so many fans? There is no benefit from them in such quantity.
Someone needs to test them all out to tell you if you need them all
Ironic using LIan Li fans in an 011 Dynamic clone by Asus.
Haadn't thought of it that way
Link for the exact vertical gpu mount kit! Thank youu
Comes with the case
I would have preferred to have done everything in black, it somehow looks like I wanted it but couldn't :D, but great video
I have to work with what I have, but was delighted how it turned out
@@ChristopherFlannigan i know Christopher, its a great video, greetings from Germany :D
Christopher can you explain how to make Asus TUF logo lights up on the front side of the case.thx
You now it it dont work whit me
Have to hold light button on front of case. Bottom most button
See if they gave this case about an inch more in space in front of the GPU, I'd buy one.
The keyword is "reverse fans"
Am I blind or did they not install a GOU riser cable from the card to the motherboard, and just left the PCIE cover that the GPU ships with on it?
The GT502 has no proper mount for horizontal install.. so.. the card just.. hovers..
i want a pc like that ... can you build a pc for mi ???
Anímate a hacerlo tú mismo, es relativamente fácil y la mitad de lo bonito de la PC Masterrace es armar tu propia PC.
Idk how I feel about this build…
airflow go brrrrrrrrrr
Can you give some closeup pictures of the glass front panel [mounting mechanism], Want to see if It is possible to replace it with a Metal/mesh panel
why do speed build? its so fast i cant no longer bhe interested after 10 seconds
16 fans!!
does not look wide enough to mount a 4000 series gpu the normal way so eh ill pass
iva a decir menuda mierd de torre pero cuando la vi por detras dije menuda torre lo tiene todo jajajjajajajajajaja
Copy of lian li o11 dynamic 😂
too many fans make the system hot
Damn, 13 fans
Nice counting
@@ChristopherFlannigan Did you have to buy the pcie extension separately or was it included?
Also is there something inside the box to steady the GPU? Or do I also have to buy it separately. Like a metal piece that holds it?
I saw in the video that you get a frame for the sideway GPU usage with the package.