This project nearly broke me. ..it happens
HTML-код
- Опубликовано: 29 окт 2024
- More pallet up cycling and re-cycling
Karl Pope Wood Craft - / @karlpopewoodcraft
Dainer Made Main Channel
youtube.com/@d...
Here is my affiliate link to CNC3D... it is a commission for me. Thanks
www.cnc3d.com....
CNC3D RUclips - / @cnc3d
XTool P2 C02 laser that I have been testing out extensively.. Safe to say I love it..The link below does earn me a commission on your purchase.. no cost to you, Just thanks from me!
www.xtool.com/...
Moisture Meter
35% off +$1 discount code: MUSAKDDEL5V2
End date: 2023/09/30 23:59:59
EWM01: www.aliexpress...
EWM02: www.aliexpress...
PAST MEMBERSHIPS 🙏
Thank you Kindly for supporting my channel
CHECK SQUARE CUBED
Dale Cordwell - Delbasid Timbers ,Barber’s Paddock Woodworks, Tim Garrett
CHECK SQUARE SQUARED
Brian Tyler - OUTDOORS WITH BT, Francisco Martinez, Gary - Possumhead Carpentry, Glenn - Presto’s Woodwork, Angus Lyons , Reubz Pene, Staffordshire Craftsman
CHECK SQUARE
James Finger- FIXIT FINGERS, Mario Capellano- THE WOODFATHER, Karl Pope - KARL POPE WOODCRAFT, Paul Williams , Alberto Bressen, Gus Elliot , Geoffrey Nicholson, Mahli Peneamena, Dryer Thackson, Teresa Cole, Mahdi Peneamena, Rich Staniland, Sam, Potashnick, Lucas Wincote, Russell Waddington, Peter Middo , Angus Lyons, Clayton Miller, Sin Bin Creations, Martin Stanik, Tim Bankes, Vic Lampert, Brandon Harjer, MrNetable , Kelvin Jardin, Tool Price Check, Das-sprechend-Pferd MR.Ed*, Lee Bennett, Lol Purl, John Storrs, GorillaQuipster, mrmjspencer
Power Tools
Bosch Bench Drill press - amzn.to/3SCJs0J
DEWALT 1800W 330MM THICKNESSER DW735XE - USA amzn.to/2XfAFqD
Dewalt Router Trimmer - Australia amzn.to/3gxwtud USA amzn.to/2XdFUqY
Dewalt Orbital sander - USA amzn.to/2ZRYEhA
Dewalt Drill driver and Impact driver -USA amzn.to/2TMWmML
Bosch Sliding Glide Miter Saw - USA amzn.to/2XijDsa
Other Tools and useful stuff
Pneumatic Denailer - Australia amzn.to/36LOQGs USA amzn.to/3cirEBm
(the one I need)
Metal Detector - Australia amzn.to/395DzSc USA amzn.to/3gAV0hI
Clamps Irwin Quick Grip - Australia amzn.to/2FIOCDV USA amzn.to/2TPxi7W
Pipe Clamps Australia amzn.to/35R6oPT USA amzn.to/2MegEdW
Wood Work Pencils Irwin - Australia amzn.to/2tdEOz5 USA amzn.to/36J9h7v
10 inch dewalt blade - Australia amzn.to/38WcYXR
Irwin clamps - Australia amzn.to/394YzJb
Stanley 12 inch Square - Australia amzn.to/2Aj1zoK USA amzn.to/2XHaDM5
Toggle Clamps -Australia - amzn.to/2Xe4CpR USA - amzn.to/3gF4nNq (same size, different brand)
Bow Products Push Pro - (push stick) Australia amzn.to/2ZUObSi USA amzn.to/3duCJAE
Bow Products Guide Pro - Feather board - Australia - amzn.to/3dhdphy
Looks like the new table saw is working well for you.
I love it. It’s a fair upgrade for me
"Just get started" .... great message and supporting content showing the good, bad and ugly. Love the narrated walk-thrus! Keep it up.
Thanks mate and appreciate that member badge 🫡
Great video, Mark! I think your drawer game has really levelled up, I’ll have to check out that tutorial video. Speaking of cycle sync jokes, I just got a notification that Jesper has a new video out - you guys plan that or something? Can’t talk now, I’m off to Denmark!
lol, no plan, very much a coincidence. Thanks for tuning in mate
Nice job mate, love that angle iron trick.
I love seeing the mistakes,we all make them, and I would get really pissed off at mine, but now I just see it as something I have to fix , and find satisfaction in that challenge
Same mate, I only really get annoyed at the time loss when I’m under the pump. Cheers
Great stuff Mark, good to see the Extra Chat Channel coming along. Such a good idea I bet that Danish guys steals it...
He must steal it. We need more videos 🤣
You ran out of pine pallets...? ah, good video mate!
I know right ran out lol covid toilet paper shortage all over again 😂😂😂
Love your work to Jesper🤘🤘🤘
Dry pine pallets. There has been a bit of a shortage lately, only because I wanted pine lol
There will always be a restock 🤣
You sir are a beautiful human. Thank you for being you!
Absolutely love ya man, I’m happy I caught your stuff so early. You have inspired me to do woodworking
Cheers mate, that is cool to hear
Great video again Mark. It’s always good to see how different wood workers approach and tackle projects. 👍
Cheers mate. Thanks for watching again
Maybe I’m goofy but I find the squeak of the nails coming out of boards SOOOOO satisfying. Got hooked on that sound renovating my house. 😉
Same mate 🤣
They are not scraps, they are acquired resources. Not drawers but movable storage boxes. Love the videos Mark.
Haha! 🤣 cheers mate, love both those definitions
cant believe i missed this video! job well done! 👍👍
Ps thank you for the kind mention 😊
No problem 😊 big man
congrats your drawer game has leveled up!! well done!!
Thanks mate. I think I go this way in the future too. Gotta hone the process that’s all
Hey Daisy love every video you put out don't think I have ever missed watching them swear I've probably watched them countless times love your work you crazy larkin 🤘🤘
Your mate from Melbourne
Darby 😀
Hey mate! Well I appreciate that very much. Enjoy ya self
Bashing together a bathroom vanity. Pallet wood, of course. I don't have a piece o angle yet, so I use my 4ft level to square 1 side on the 255mm contractors multi material table saw. 2 #5 hand planes and an electric for flattening. Dual base 1/4in router and 5" ROS. My shed is storage only, so it's all done in the backyard, under a 3x3m gazabo, as required. Thanks for putting yourself out here M8, gives me hope. Take care & stay safe.
That'll do Doug, Anything straight is the go lol You will slowly claim that storage as your space, I can feel it in my bones haha
Man I love how your brain works. I would love to hang out with you for a week and just pick your brain.
Haha, works a lot slower in real life 😂
I'm seeing several techniques even I can put to work for good effect, thanks!
It's also a good reminder that some steps can be figured out by trial-and-error, sneak-up-on-it methods ... AND that it's okay to do it that way.
Cheers, as always!
Hey Tim, glad you got a few things out of it. Hope you are giving those pallets a good bashing
@@DainerMadeUnofficial Still bashin' on, thanks!
Guy I used to work with built 'choppers' in the 70's.
He always said, " beat it 'til it fits, paint it 'til it matches, if that don't work, chrome everything and some idiot will buy it"
Years ago I had to send bunch of motybike stuff to Oz, eBay sellers in US never want to fill out Customs Declarations or charge stupid amount extra.
Postage was expensive even back then so I doubt it's gotten cheaper to send stuff from Oz around the world.
I watch all of your videos, excellent information. I love it!
Awesome. Thank you mate
Great job it turned out great. Love your humor always a great video
Thanks so much!
Very very Nice job as always!!!👍👌💯
Thank you! Cheers!
Cracking video mate. Had to check I was on the right channel when I saw the hand plane!
I got all the cool things lol
Loose plans or loose screw? 😂😂😂
Loving this channel Dainsey and thanks for the nail removal tip.
Plans? What even are they! Oh yeah the shoulders will thank you
Hi Karl, just wanted to give you a heads up, when I saw the thumbnail for this video I thought it was a vid about a pallet transport bike, which looked fascinating to me, not a cabinet build video. 😀 Eric.
Thanks mate. This channel thumbnails are more puns that what the projects is. My name isn’t Karl, Karl was the shoutout 😁
@@DainerMadeUnofficialMark, maybe you can be Karl Mark(s). Any resemblance to real persons is coincidental. It was stronger than me. 😂😂
I give my dirty blades a wee soak in Simple Green on an old lid that fits the blade, then a scrub with scotch bright or a brass bristle wire brush.
Sounds like the plan, cheers
I do like the transition between sides and top, looks cool 😊😊😊
Thanks Robert, wife is happy lol
Thanks for the hott tip mate. Seeya in anotjer 6 ❤❤🎉🎉
Happy to help
Good carcass Markus !! Drawers were wicked too! 🫶🏼 I watched this on 1.75x speed, it was hectic 😂 I vote that your fan base/supporters be declared the Starty Army.
1.75 for a north queeeeenslander should be fine. T shirt Starty Army 😆
amazing quality on the drawers. where do we find these 6mm blades ???
@@scottbrooks2351 at Timbecon I’m pretty sure
It doesn't matter it's just for the wife. I salute you. You are a very brave man. I hope we see you again. Cheers John
You will indeed John. Cheers
.....It does make you wonder if General Custer shared the same sentiment before the battle of Little Big Horn.
I still do all my rebates on the router...looks so much easier on the table saw!
Probably much in a muchness for time. I think I’d like a nice router table set up for future rebates 🫡
Best advice ever. You can’t be too chunky on the bottom and too light on top 😂
Testify 🤣
He does it again!👏👏 Awesome job m8 looks wicked. So many things to pick u up on there but 😲😲😲😲 you properly swore!🤣🤣 On ya m8 hope your good ps booooo no turning mallet video. But we still love you dribbling on. 🏴👍
Cheers mate, yeah sorry it isn’t a turning video. The crowd will turn on me 🤣
@@DainerMadeUnofficial disappointed ☹️ I'll forgive you but just this once mind!!😂❤️👍😂🏴
26:15 DADO. A rebate/rabbit is a 2 sided groove (on the edge of a board).
I’m sure I won’t remember this 😂
Rebate or rabbit is what they call it in the UK, Scotland, Ireland, Australia etc. only Americans and some Canadians call it a dado
I also work with reclaimed lumber and it really is a pain when you cut wrong lengths and looking for replacement pieces 😅😂
I hear you mate, especially when it has many steps to get it what you need
@@DainerMadeUnofficial while i got your attention, i would like to personally thank you for all your videos over the years. Your channel, as with a few more, really helped me getting started
Cheers!
@@marcorock101 Lucky I got the email, second replies don't get a notification lol, thanks mate I really appreciate hearing that. Hope the woodwork brings plenty of enjoyment your way
Hey Mate! "Piston fit" is the phrase you're looking for on drawers that fit in carcasses! ... Blade Cleaner: CMT 2050 works great, "they" say Simple Green works too. Thanks for taking those giant timbers and knocking them down in half, to glue those pieces of wood back together... Did I get that right?!
You've + groove drawers are great!!!
Rub a bit of paraffin / wax on bottom + sides of drawers AND bottom + sides of carcass to make drawers slide easily.
Piston fit!!! Thank you, I’ll be quoting that from now on 🤣 I’m sure my pistons will be too tight or way too loose lol
Swap the left and right drawers. I think you did that after you painted them.
No I tried that. I’d say the screws pulled it north
Homie got some swag right thurrr... slide to the left cha cha cha =D
lol, I could have added a little music I suppose haha
Have you got a temperature? I saw a handplane. What's going on, brother??
Trying to get some credibility’s 🤣
@@DainerMadeUnofficial Hahahaha, that is way over-rated
Hey Mark, have you thought about making yourself a solar powered kiln to dry some of that pallet material.
i saw a bosch official recommendation for blade cleaning was a sinking it in aceton overnight
Interesting. Cheers mate
Ive been flipping old hand planes on facebook for the last year. Sold around 150ish. The new algorithm, ive found that no one messages me on newly listed things for two weeks, then suddenly everyone messages. I sell a few planes with a mate whos a few suburbs away and he is getting no hits now. Im closer into Melbourne and we suspect that the radius algorithm has changed... additionally key words and tags sometimes dont work, and my mate and I back tested this. Ive had more success of recent listing a few of the tags in the title than the tag section.
It’s probably no help but many people seem to be having this problem across the board with the algorithm, I’m not sure what you can do but I thought I’d let you know you are not the only one, maybe someone will read this and have some advice for you
Good luck
It’s a shame it not juts a simple system and fair for all. Sounds like you have something good going flipping planes though 🫡
Definitely harder to sell there these days
Ignorance is bliss mate 😂 I had about 6 things to comment on but forgot them all by the end 😅😂 I have a funny feeling the wife's tasks for you will never end so don't get your hopes up! 😅
Dude! There is more shop changes coming, just learned this today, so more shit jobs unfortunately. Hopefully I’ll mix in some fun stuff too
I always pause video's and comment on what I think then add to it later until video is over.
Of course, sometimes I forget to actually post comments when there is something interesting on the 'next' list. 😁
A great and easy way to clean the blades is to soak them in water mixed with a bit of sodium hydroxide solution. Let it soak for 10-20 minutes and then gently scrub with an old toothbrush. Rince the blade with clear water. Especially good at getting rid of the gummy pine sh*t! Don't forget to wear gloves!
Cheers
Sounds like a simple option. Cheers for that
I would wear gloves
@@pbjae8140 Yes, of course! Forgot to mention it
Hello Danisy
The table turned out nice
Hello Ryan, cheers mate... much appreciated
Dado's brah not rabbet or "rebate". LoL love the vid and the banter. Be careful - would stumpy nubs be comfortable with some of the cuts you make?
Dado's potatoes mate, I can never remember the right term. My hands are always safe, what cuts are you referring please
Disclaimer. I'm no expert. However heaps of cuts with non jointed wood, unsupported pieces on long ends come to mind. I dunno sometimes things come across differently than they are in real life.. keep the content coming.
6:28 might just be the grain as I didn’t get a great look at it. But it looks like there may be a little spalting on that piece there.
I thought you said "a little bit of a roo" as-in the Australian version of "oh bother"
Like if a roo walks into your shop and you have to shoo it away without getting kicked
Sorry you lost me. I can’t remember the reference
@@DainerMadeUnofficial I think you had said "a little bit of a route" I assume because a seemingly simple task took a lot of twists and turns
What thickness are the beams you use for gluing up. 2mm? Thanjs
I think they are 3mm, either would be sufficient
Rub sawdust unto your glue gaps
I’m well versed in that trick haha
Does that paint roller leave a "orange peel" kind of surface?
Not these micro fibres ones no.
You take a long rod or Dow and put your saw blade's on it over top a trash can and spray oven cleaner all over it take a old toothbrush and clean it, rinse it off with warm water and dry it then spray it down with Pam cooking spray if you have that over there and also spray the top of your table saw down with Pam cooking spray and lightly wipe them it will make your wood slide across it so much easier. It works great..
Sound delicious 🤣 cheers mate, best I try a few things
Which brand table saw is that
It is a Sherwood from Timbecon
How tall. Are you? Haha the tablesaws wayy higher up on me.hahah
6 foot 2, I have raised my saw a few inches too
@@DainerMadeUnofficial wowie...... 😂😂😂 i still havnt got mine after 1 month of it being broken.
Just got collected today hahaha
Should of used draw slides
No thanks, it’s only a hallway table
@@DainerMadeUnofficial I always take old draw pulls off things people done want so I have a few
Dam was hoping to be the first comment
just finished watching your last video and a new one popped up and thought it was magic
Cheers Tom, I am stoked you watch them
5:00 Move with your body, not with your hand.
That's what she said.
lol
Is it a drawer, or is it a box ?
Dunno 🤣
@@DainerMadeUnofficial 😆😆
Dainsey, how’s life in the Ville brutha?
It’s fine Dirk