THANKS!! My teen son's Yuxin Little Magic 6x6 popped when I stepped on it. After watching this, it took me about 40 min to sort and rebuild. I found it helpful to have someone else grip the first finished corner quarter so I could build the next bridge but after that I managed alone. This was much more satisfying than buying a new one and my son's smile made it all worthwhile.
Spent 2 Hours re-biulding a 7x7 that popped 2 years ago and didn't want to re-biuld it again, this video didnt "help" me that much, it just gave me the courage and energy to re-biuld it and finally i have done it; Thanks.
the exact same thing happened to me when i got yj mgc 6x6 2 years ago, with the only difference, that i didn't get the idea to watch a tutorial, instead i was painstakingly trying to figure out how does the mechanism work so that i can fix it. now it happened again but apparently i am older and wiser.
I once disassembled one of the hopeless Rubik's 5x5, I thought I would be able to improve the turning by adding some lubrication to the internal mechanism. It ended spending about a month disassembled, all parts in a bowl, until I had the actual courage to get it back together. The improvement was really marginal.
I remember my 4x4 cube that I disassembled intentionally to look around inside it.. also I was curious about its poppings and other bad conditions. When I was about to assemble it, yeah pretty hard because of 3 inner-pieces and moving center plate.. it also took so many months disassembled and finally, I had a courage to assemble it again. Never used this again because IDK how to solve it. Same thing happened earlier for the second time. I thought it will be easy but still feels hell. The cause is, only one of the 3 inner-piece is missing. BTW now I can solve it..
You are a lifesaver! I have had my valk 4 disassembled for months because I could not get past the first section. I am currently finished with the second corner section.
Thanks Z3! Very helpful. Had to take apart my new Aosu 4x4 in order to clean each of the pieces because of a grinding feeling that I think was caused by lube clumping together between the outer pieces. Reassembly was difficult, but it was well worth it! Cube works perfectly and smoothly again!
Thank you! My 4x4 popped, like completely, and your tutorial was the first I thought of, it was great. Thank you so much, this is my only decent 4x4. My other is a rubik’s brand...so thanks.
Holy crap thank you so much, my last 7X7 had a piece pop out and I broke it trying to put it back in. My new one came today, and almost immediately I popped one out on accident, I was so worried I’d break it again but now I know how to do it right!!! Thank you!!!
Note that my explanation of each cube in this video builds on the explanation of all previous cubes in the video. If you're just looking to assemble a 4x4 or a 7x7, you'll need to watch the 5x5 section first. If you're just looking to assemble a 6x6, you'll need to watch the entire video up to that point. Also wow, this video sure turned out long (although I guess 7 minutes per cube is reasonable). I hope you at least found the in-depth explanations and demonstrations helpful; I haven't really seen a good general-purpose big cube assembly video on RUclips.
I really really want another qna! its been a while... Also, Thanks! My 6x6 has been disassembled for a while now... Not the speedsolving type Also also, I love your vids! You are so nice easy to understand. You should not be as low as you are on J Perm's Tier List
i've been trying to reassemble my 4x4 for two hours now. I can get the first three bits that go in between the centre bits easily, but when I have to do the other one, the first one just pops out every time.
Thanks. I popped one of the inner middle layer pieces of my 4x4 out and was a bit confused where it should even go. I had kinda hoped never to have to take apart and reassemble any bigger cube, but at least it's back together now.
Just a tip for the 4x4: assemble the 3 first pieces (the big and the 2 tiny pieces) together and squish it in it. When its to difficult to hold the thing toghether
That is possibly the worst advice I have ever heard. If you have a small cube, holding the 3 pieces together can give you a higher risk of exploding your cube than just putting them in one at a time.
Thanks had a total pop up literally every piece of my 5x5 fell off, had to glue the core also, and some pieces came apart in three 😂😂😂 thanks so much I have my cube back thanks to your video
Really nice vid on reassembling cubes that are big, 4x4 is way more difficult to do than the 5x5 because the core center piece base is solid unlike the 4x4 core center which moves up and down which is a struggle when putting edge sections between the centers.
a trick you can use for putting back together is that if you're going for speed instead of to have it solved completely is that on even cubes make sure the corners are aligned and then on odds make sure corners and center edges are correctly put in like a normal 3x3. all the centers and other edge pieces don't matter.
Thank you so much! I have been trying to put my 4x4 back together for a long time. I knew about your video but I thought it was gonna be hard like the other ones. Then I watched it and it was amazing. Thank you again and I love your channel
I enjoy taking apart my new cubes when I get them to see how they work, and if I can reassemble them. I recently got a 7x7 and I've been worried I might not be able to get it back together, but I'll watch this and see how it goes!
Thanks. Used this to fix my 9x9x9 after a piece had popped out. To be honest it doesn't quite look right or feel right, and I think it'll probably fall apart at some point, but at least if it does I'll know what to do!
Thank you for this video i spent three hours assembling my magnetic 6x6 and it was hell cause it was lubed up and the center parts kept falling out of my hand.
Suggestions for odd layer cubes you can put it scrambled but middle edges and corners placed correctly relative to their centres . For even layer you can put white corners one way and yellow other way so that cube is solvable
i already knew how to assemble my 5x5 and stuff, but dang my 5x5 come apart quickly. all i need to do is pull on a corner and a wing and it mostly just falls apart from there. i was impressed when i saw your 5x5 core. I use some kind of mgc 5x5 from amazon, and compared the my other YJ mgc cubes, it feels... different.
I learned this from J Perm on even layer cubes put it together so that all of the corners are opposite ex: all the white corners facing one way and all the yellow corners facing the other way on odd layer cubes do the same thing with the corners but do it with the middle edges too
Where were you a week ago? I kind of needed exactly this. Still managed after a couple of hours but it was brutal .... my 4x4 kind of exploded on me and it's exactly the model you use.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
THANKS!! My teen son's Yuxin Little Magic 6x6 popped when I stepped on it. After watching this, it took me about 40 min to sort and rebuild. I found it helpful to have someone else grip the first finished corner quarter so I could build the next bridge but after that I managed alone. This was much more satisfying than buying a new one and my son's smile made it all worthwhile.
your son is one lucky boy!
Good thing you didn’t step on his pyraminx :)
Sort? Just findthe pieces its easier for me
the Yuxin 6x6 turns like crap you should get him a new one
Find the*@@GamerGuild07
Tip: Don't lose any pieces.
lol
lol
M3ko2 thanks for the tip but ur too late
A little bit to late = )
.
Spent 2 Hours re-biulding a 7x7 that popped 2 years ago and didn't want to re-biuld it again, this video didnt "help" me that much, it just gave me the courage and energy to re-biuld it and finally i have done it; Thanks.
When assembling a big cube is harder than actually solving it
It’s been 1h 20mins and my 5x5 is still not built
😂lol
true
It’s been a few months now and my 21x21 is still not built
Update: only a quarter of it has been built
Thank you so much. I just got the YJ MGC m 6x6, and it popped internally and externally, and you tutorial was the only one that actually worked.
the exact same thing happened to me when i got yj mgc 6x6 2 years ago, with the only difference, that i didn't get the idea to watch a tutorial, instead i was painstakingly trying to figure out how does the mechanism work so that i can fix it. now it happened again but apparently i am older and wiser.
How did it pop internally😂😂😂
6x6 can pop internally because it wants to ig
me: the way to take apart the 4x4 is loosen the tensions and then start doing oll parity really fast and wait till it explodes.
O perm
O perm
O perm
O perm
No chain
I once disassembled one of the hopeless Rubik's 5x5, I thought I would be able to improve the turning by adding some lubrication to the internal mechanism. It ended spending about a month disassembled, all parts in a bowl, until I had the actual courage to get it back together. The improvement was really marginal.
I remember my 4x4 cube that I disassembled intentionally to look around inside it.. also I was curious about its poppings and other bad conditions. When I was about to assemble it, yeah pretty hard because of 3 inner-pieces and moving center plate.. it also took so many months disassembled and finally, I had a courage to assemble it again. Never used this again because IDK how to solve it. Same thing happened earlier for the second time. I thought it will be easy but still feels hell. The cause is, only one of the 3 inner-piece is missing. BTW now I can solve it..
I have saved this, because my 4×4 recently exploded. It's back together now, and when I saw this video, I decided to save it in case it happens again!
3:27 that is a very stable 5x5
Cu bert romanian?
Valk 5
Thanks now I can fix my 4x4.
+1 4x4 on the collection
Getting a piece is like taking a tooth out😂
You are a lifesaver! I have had my valk 4 disassembled for months because I could not get past the first section. I am currently finished with the second corner section.
Thanks Z3! Very helpful. Had to take apart my new Aosu 4x4 in order to clean each of the pieces because of a grinding feeling that I think was caused by lube clumping together between the outer pieces. Reassembly was difficult, but it was well worth it! Cube works perfectly and smoothly again!
Thank you! My 4x4 popped, like completely, and your tutorial was the first I thought of, it was great. Thank you so much, this is my only decent 4x4. My other is a rubik’s brand...so thanks.
Wow! Probably the most efficient and consistent tutorial I’ve ever seen
Holy crap thank you so much, my last 7X7 had a piece pop out and I broke it trying to put it back in. My new one came today, and almost immediately I popped one out on accident, I was so worried I’d break it again but now I know how to do it right!!! Thank you!!!
Note that my explanation of each cube in this video builds on the explanation of all previous cubes in the video. If you're just looking to assemble a 4x4 or a 7x7, you'll need to watch the 5x5 section first. If you're just looking to assemble a 6x6, you'll need to watch the entire video up to that point.
Also wow, this video sure turned out long (although I guess 7 minutes per cube is reasonable). I hope you at least found the in-depth explanations and demonstrations helpful; I haven't really seen a good general-purpose big cube assembly video on RUclips.
How did u post this comment 7 hours ago when u uploaded it like just 5 minutes ago?
This is going to be useful for me, thanks.
K
oh ok
Ragingputty2 [GD] yea I'm so confused
I really really want another qna! its been a while...
Also, Thanks! My 6x6 has been disassembled for a while now... Not the speedsolving type
Also also, I love your vids! You are so nice easy to understand. You should not be as low as you are on J Perm's Tier List
Same
Mark Tripple I love the Q&A videos! Same!
@@spanorian8574 same
Thanks! I popped my cube accidentally and this tutorial helped a lot! Subscribed!
I forgot to watch the whole 4x4 segment and wasted 2 whole weeks. -_- Thank you bro. It was a really good tutorial and saved me a lot of money
i've been trying to reassemble my 4x4 for two hours now. I can get the first three bits that go in between the centre bits easily, but when I have to do the other one, the first one just pops out every time.
same but i cant do anything at all its like hell
99 Peons don’t worry, a few weeks ago I just sticky taped every part id done of the core then took it all off and put the actual pieces in
@@ebstar511 imma try that
Use tape for the weird internal peices to keep them together
Chappo oh nevermind
Thanks. I popped one of the inner middle layer pieces of my 4x4 out and was a bit confused where it should even go. I had kinda hoped never to have to take apart and reassemble any bigger cube, but at least it's back together now.
tysm! I would have never gotten my 6x6 back together without your help
i now have a newfound respect for surgeons
Hai lol
profound screming intensifies
@@MaxGaming-vr2hy Yes
Just a tip for the 4x4: assemble the 3 first pieces (the big and the 2 tiny pieces) together and squish it in it. When its to difficult to hold the thing toghether
That is possibly the worst advice I have ever heard. If you have a small cube, holding the 3 pieces together can give you a higher risk of exploding your cube than just putting them in one at a time.
Thanks for this guide! Gave me the confidence I needed to reinstall one of the smaller inner pieces of my magnetic 8x8
Cubes were harmed in the making of this video. Thanks for the video I really needed it.
Thank you! Half my 6x6 exploded, and I was horrified, but this helped me get it back together!
Thank god for these videos! There aren’t any other tutorials and my little magic 6x6 is disassembled
Thanks had a total pop up literally every piece of my 5x5 fell off, had to glue the core also, and some pieces came apart in three 😂😂😂 thanks so much I have my cube back thanks to your video
Thanks mate, my 4x4 exploded and had no idea of the colourless pieces and such... you made it way less frustrating putting it back together
Really nice vid on reassembling cubes that are big, 4x4 is way more difficult to do than the 5x5 because the core center piece base is solid unlike the 4x4 core center which moves up and down which is a struggle when putting edge sections between the centers.
putting it together scramble unironically is a war crime
Thanks for the guide. Got mine put back together, the little pierces scared me a bit .. haha
Thank you! If you are having problems with the first step on a 4x4 it helped me to tape the inner layer so it would stay in place
Thank you z3 cubing this video helps me a lot I tried to reassemble my 4X4 a whole day
a trick you can use for putting back together is that if you're going for speed instead of to have it solved completely is that on even cubes make sure the corners are aligned and then on odds make sure corners and center edges are correctly put in like a normal 3x3. all the centers and other edge pieces don't matter.
Thank you so much my 4x4 has been disassembled for ages and now this has helped so much! Yay!!! Also first comment
Thank you so much! I have been trying to put my 4x4 back together for a long time. I knew about your video but I thought it was gonna be hard like the other ones. Then I watched it and it was amazing. Thank you again and I love your channel
I enjoy taking apart my new cubes when I get them to see how they work, and if I can reassemble them. I recently got a 7x7 and I've been worried I might not be able to get it back together, but I'll watch this and see how it goes!
nvm, not a tutorial for 7x7 like it says. Spent two hours tryna fix my cube, waste of time. Putting it away in a bag, completely in pieces
another update: Finally fixed it. Had to find another tutorial sadly
I got my first 7x7 a week ago & my brother accidentally dropped it and...
Let's just hope that 7x7 assembly tutorials are better than 3x3x4 tutorials.
You are life saver man. .thanksss 7*7*7 was a mess joining them up
2 words
THANK YOU
fantdm hero ikr
Thank you so much It helped me to make my 7x7 which was poped yesterday. This is the best video for assembling cubes
Thanks!
Thank you so much, last time i did on 4x4 it didnt work, but it did work for the 6x6
Thank you so much you saved my only 4x4
My baby cousin recently smashed my 4x4 so I'm glad this video came out😂
Heavenly Cuber haha 😂 rip
👌 Pro cuber! 👌
Omg thank you so much my 4x4 has been "broken" for about a year know and it's Been so frustrating trying to assemble it.
Thanks I tried to reassemble my 6x6 by myself but didnt work but after watching this tutorial my 6x6 is nicely reassemble d
Bro I broke my 6*6 and was extremely worried about it. But then I found out your video and now I fixed it. Thank you so much
You upload in my timezone really early
THANK YOU SO MUCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I was so sad when I couldn't fix my 5x5
This helps so much with 4x4 assembly. Thanks!
Thanks for making this tutorial, I needed this.
it has been a pain, my inner edge pieces can't get inside easily.
Same
Thank you it took forever for me to learn how to do a 4 x 4 to a 7 x 7 and a 5 x 5
Thanks i just the assembled 7x7 you explain really nicely i will be able to make 7x7 videos again thanks so much
Dude this helps so much I can’t thank you more
The DAYS when I assembled my 6x6 was the worst in my life😅
Your the best youtuber ever!! I hope you read this Z3CUBING
Dude thank you thank you thank you thank you very it took me only 45 minutes to pit it back🎉
Thank you so much, this helped me restore my first 6x6 that I just got today.
My 5x5 exploded recently will have to use this to fix it as I can’t afford a new one lol, thanks for the tutorial!
you're a life savior!
i have hard ball core in 4x4 soo... pray me good luck :(
Same
It took me 2 hours. Even I have ball core 4by4
Did u assemble it btw
@@pranavtadepalli337 yupp
@@romanaromana1149 how much time did it take u
Honestly I’ve got to say..... THANK YOU SO SO MUCH
TYSM, my valk 4x4 popped when my friend threw it on the floor,and this helped me so much
But the 5x5 didn’t work
Thank you
This helped me reassemble my 4x4
Thanks. Used this to fix my 9x9x9 after a piece had popped out. To be honest it doesn't quite look right or feel right, and I think it'll probably fall apart at some point, but at least if it does I'll know what to do!
Thank you for this video i spent three hours assembling my magnetic 6x6 and it was hell cause it was lubed up and the center parts kept falling out of my hand.
Love you 😘
Your first
@Mike Bergmans yes
@@smartguy9951 yes, I'M
@@smartguy9951 yes
TIP: take out an outer edge by turning the layer almost 45 degrees to where it is right where the other layer edges are then pull it out like a 3x3
honestly wish i found this video sooner because I've literally just finished putting back together a 6x6, it's took me 4 days it was hell
Yes!! I am so glad that you made this video!!
Suggestions for odd layer cubes you can put it scrambled but middle edges and corners placed correctly relative to their centres . For even layer you can put white corners one way and yellow other way so that cube is solvable
12:14 helped me alot to fix my 4x4
3 years later
Z3 cubing: how to deassemble and reassemble a 25x25!
This helped me sooo sooo much❤️❤️
wow this is amazing
i already knew how to assemble my 5x5 and stuff, but dang my 5x5 come apart quickly. all i need to do is pull on a corner and a wing and it mostly just falls apart from there. i was impressed when i saw your 5x5 core. I use some kind of mgc 5x5 from amazon, and compared the my other YJ mgc cubes, it feels... different.
Probably a fake one like Amazon usually sells
Yass!!! Thanks wanted this for a month!!!!
Thanks,my 6x6 pop today
I love your Channel make more vids!
Ya yeet Boi yeH
Thank u . Im having problems assembling my mei long 6×6. This is helpfull
my non cuber brother destroyed my 7x7, thanks for the help ^-^
I found what I was looking for. :-)
I used tape all the way, helped a bunch lol
Hey Z3cubing
thats really helpful, and awesome video! pretty early too
Thank you for this tutorial ilove this video ill save it incase my 4x4 pop again thank you so much
FINALLY I GOT THE 4 BY 4 ASSEMBLED
I learned this from J Perm
on even layer cubes put it together so that all of the corners are opposite ex: all the white corners facing one way and all the yellow corners facing the other way
on odd layer cubes do the same thing with the corners but do it with the middle edges too
your battle cats pfp is 👌
@@bobateacuber7646 tysm!!
Thanks I just put my 4x4 back together
on my 4x4 I didn't need to build the inner pieces after the first corner, you can build the outer parts and add the inner parts as needed
This video helped me sooooooooo much
Where were you a week ago? I kind of needed exactly this. Still managed after a couple of hours but it was brutal .... my 4x4 kind of exploded on me and it's exactly the model you use.
Gooooooooooood tuuutoriiiiial
I want to buy a 5x5. Thanks for this video!
This guy literally explained how to assemble and disassemble 4 by 4 to 7 by 7 in 12 min
I did not realize you were in colorado! Wow! love to meet you some day :thinking: