2011 Buick Regal Shifter Knob Replacement
HTML-код
- Опубликовано: 15 сен 2024
- You can find a new shifter in eBay or Amazon.
I used this: smile.amazon.c...
My only complaint is it's a bit closer to brown rather than black.
As far as getting the old knob off, I had to use a bit of force and break the plastic chrome piece. Don't be scared, just do it because I have zero clue how to get it off any other way. You're most likely going to be throwing the old part out.
Two years later and this video is still saving lives lol. Thanks for this. My mom got her purse strap caught on it and yanked the silver piece out somehow 🤦🏾♀️ I had to use a pair of tweezers to push the little black piece down everytime I needed to shift gears smh. I'm about to make an 800+ mile trip and didn't want to be fooling with the gear shift the whole way. Good as new thanks to you bud 👍🏽
Haha...happy it helped you! What a fluke! Have a safe trip!
Thanks for the video. My 2011 Buick Regal’s shifter knob started looking pretty raggedy, so I followed your instructions but stop shy of chipping away the plastic. I squeezed on the trigger, pulled upward and it came right off. Push the new knob I got off Amazon for $13.99 + tax downwards with a little force and it was on. Then I noticed it wouldn’t go into Park, so I pushed downwards a bit harder and it popped into place and works like a dream. The whole job took maybe 20 minutes. Thanks for your help!
What did you write for the part I'm trying to buy the part now not sure if but the right part I have a 2011
This video was helpful. It took me about 10 minutes to replace the gear shifter knob.
I just ordered a shifter and the fabric part for my Buick Encore, your video gave me some hope. Thank u brother.
Worked just like video said. 👍🏼Got it for $18 on Amazon. Dealer wanted $160 for the whole housing.
What was the exact part you ordered on Amazon
Thanks for this video. I have a 2012 buick verano and did not want to spend a bunch of money to replace shifter. I was able to pull off the orginal shifter without breaking anything. Once I disconnected the clip tie, I pulled up and to the left a little on the shifter. It was a little hard but after a couple of tries it came off cleanly. I was so glad to save some money.
Thank you so much for this. I replaced the factory original on my 2013 with an ebay part in 2018 without too much struggle on the removal process. But this year, with the replacement part starting to fall apart, I tried pulling it off with all my strength and couldn't. Removing the metal c-clip was the key. Note: I had better luck breaking the collar by prying with a screwdriver from the top by inserting between shaft and collar instead than going at it with snips. The plastic fractured easily.
Thank you so much! I replaced mine like a champ due to your instructions!
Thanks man, I had to do work and break shir too😅 and had to get that pin out to get the damn knob off lol. It worked, thank you!!
Thank you so much for sharing this video. I too followed this video step by step and was able to replace my knob for $23! Thank u so much!!
I have this exact issue. The heat down here in Florida really does the damage. I ordered my shifter, so this will be a big help. I've got a 2011 Regal. Thanks so much.
Thank you so freaking much…You saved me 200+.. Thanks to you I didn’t have to take my Buick to the shop… Thank you so much
You're welcome! Any issues getting it done? I may make a video for trunk release button as mine doesn't work. If I had to guess, yours doesn't either 🤣
You did the Best Replacement Video I've seen. You keep it REAL!!
Finally, a very helpful video on handling this. Thanks!
Pretty simple! Next I have to fix my trunk release button, maybe I'll throw a video up
Great video! You described the same scenario as I have. I will try to destroy it tomorrow. It’s too dark in the U.K. now.
Great video!!! Saved the day for me!!! This vid is MUCH better than the others saying you just pull it off!🙄🙄🙄I’m a pretty strong guy & the shifter wouldn’t budge! Lol
Thanks man! You just saved me like $600 at the dealership
Thanks a million !
explained exactly what i needed to see.
Happy to help. Lmk if you run into any trouble and I'll try to walk you through it. Next I gotta make one for trunk latch replacement. Mines hasn't worked in years. I can only open it from the key fob
My man 👍
Thanks, man, very helpful... now I need to get a zip tie and I'm set to break some shit off and replace my shifter which looks exactly as you did... excellent
@L_O_W_K_E_Y-G shit. I broke 3 nails trying to get that fucker off. I'll be breaking mine apart tomorrow on my lunch break. Difference is I am replacing mine because the button broke off and fell out of the knob.
Best video to explain this!
Short and sweet!
Thanks a million. My fiance just changed it with your great instructions 😀
Happy to help and save some money!
A little bit of work, a little bit of breaking shit😅 I dig it.
Nice video explaining how to replace the shift knob 👍🏼 I do have one problem with this video.As a clean freak I have to ask how does your car get that dirty it looks like you just went through the desert with it.It’s probably just me I have to have my car clean at all times it’s cleaner right now then when I got it from the dealership 😂
I feel bad for whoever has to deal with your OCD. 🤣 I used to be a smoker. It was impossible to keep the ash down. Also in the northeast and winters here are just dirty. Luckily I've smartened up. Happy you enjoyed the vid.
Video helpful with removing gear sele tor plate..I watched another video and found out you can pull the know off with some force
Terrific detail.
you’re the fucking man! thank for saving all of us some big bucks!
Your welcome! Happy to help. Reading the comments it looks like 95% of you had zero issue, with of course a couple knuckleheads thrown in there!🤣
Thank gawd for you, bro. It worked.
Easy fix! And apparently an issue for a lot of people. I gotta do a vid on replacing the trunk release button. Mines broken and I'm sure everyone else's are too
This video saved me so much money thank you!
Worked perfectly...thanks for sharing
Do this also work for Buick Verano 2013 ? My button broke and I’m crying because I don’t know what to do
I just looked. I believe the process will be the same. The shifter also looks the same. Search Amazon for "2013 Buick verano shifter." It may say it's for Opel Insignia. (That's what the regal is called in Europe). To answer your question, YES! Order away. It's not a very difficult process. I am no handy man, but was able to do it. You got this! Good luck!
@@mrpink3998 thank you so much 💕
@@serenityjackon6476 if you run into any trouble, lmk and I'll try and help. Pretty straight forward though.
What if vehicle stuck in park
I would imagine you should be able to do it just the same way. Once you get the new shifter on you can get it out of park maybe.
I'm trying to buy the part on Amazon can you please tell me the exact part you brought
hey does a 2014 peice work on a 2011 one?
@@LovelyGramophone-gv2gj I'm not sure what you purchased specifically, but the ones on Amazon say 2009-2013. So you may have to purchase a new one. Looking at the pics on Amazon, the bases look similar though. But I would just purchase the correct one and send it back if it's the same
I can’t get mine into neutral
Do you still have the shifter on or off? I know you asked 2 days ago, maybe you've got it figured out by now.
Very help full ty
What was the exact part you ordered on Amazon I don't want to order the wrong thing
Go on Amazon and search "2011 Buick regal shifter" Select the second one down, once you click it, it will say in the description "this fits your 2011 Buick regal" Pretty simple and shouldn't be too confusing, but I completely understand where your coming from. The brand or description in title is "X AUTOHAUX"
Thank you 🙏
Top piece under broke off how to put in gear
Just pull up man, that knob will come off. But you need to put out so it can come off
What if my original had a clicking button for it and the new handles on eBay have no button. Will that matter?
nvm i see your link... thank you
i need for 2014 regal, looks like this is only 2009-2013
What if shifter wont shift into park
The issue here is that the little black slider that u have to push in to shift to drive has gotten stuck, so all you have to do to shift to park is to dislodge or remove that piece.
micah silverman same problem here, what do you mean black slider?
@@LuisLopez-sg3td so there is the silver button that you normally press to shift the vehicle right? Well that silver button is attached to a black plastic piece that is the piece that actually slides into the knob pressing an internal button. You need to slide that piece into the knob and hit that internal button to shift the vehicle. Or conversely if it is stuck in place you need to remove it.
micah silverman okay gotcha thank you very much I appreciate it :)
@@LuisLopez-sg3td You're welcome!
My dumbass ripped off my whole shifter boot. I can get it back on, its just a painfully tedious process.
You didn't pull up on it. You didn't put the pin in properly
Video keeps stopping and starting
There's nothing missing on how to get the job done. The starting and stopping was just me situating myself or camera
You just have to pull up on the knob it will come off no need to break anything.
Not on mine. That sucker won't budge.
Top piece under broke off
My car won’t shift into park now
You should still be able to shift into gear with the handle off. I can't remember but I think that black piece that sticks out can be pulled out. Hopefully you got it figured out by now!
Thanks for the video. My 2011 Buick Regal’s shifter knob started looking pretty raggedy, so I followed your instructions but stop shy of chipping away the plastic. I squeezed on the trigger, pulled upward and it came right off. Push the new knob I got off Amazon for $13.99 + tax downwards with a little force and it was on. Then I noticed it wouldn’t go into Park, so I pushed downwards a bit harder and it popped into place and works like a dream. The whole job took maybe 20 minutes. Thanks for your help!