Thanks for making the video! 😊 Great teaching tutorial, too. I locked myself, I don't know how, out of my bios with admin password, but I ordered one. However, I have experience with programming MCUs using Microchip Studio 7 and other software, and so thanks to your video, I will attempt a more hands-on approach. It's going to be fun 😁. Peace ✌️
Thank you for the informative video, but i want to ask why you do not use the ezp2109+ i saw you have it. i think it is a bit faster in writing only reading and erasing are similar.
Your welcome. Yeah, i just love this one, and the other one is not really faster. Important is also, slower working means also better change for success bios writing.
Grüße an Dich mein Bester! Ich erinnere mich noch in der Ps3 Modding Hochphase an deine Videos zum IHS Köpfen und so. NSC.... in da place to be... haha legendär!
Brilliant video yet again. Could you do another video like this for programming the Asus ROG Strix X570-F Gaming motherboard BIOS chip (with the chip fully removed off the motherboard) please. I'm requesting this because i bought one of these motherboards (which cost a fair bit of money btw) and after i carried out the BIOS firmware Update it bricked the chip completely. Now the BIOS chips on these boards have muliple solder contacts on all 4 sides of the chip and i wasn't sure what type of programmer i'd need to buy to flash a new BIOS chip. I had searched and searched online for a new replacement BIOS chip for the A/R/Strix X570 motherboard and drew a blank. So i ended up returning the motherboard back to Asus RMA for a full refund of my money.
Thank you 🤗 Yeah, i could do a video about, but i got not the same board here. As i remember it's a Winbond Chip with 16 or 32Mb If it's bricked, you can just reflash it. You need the same programmer like in this video with the tool NeoProgrammer. Otherwise send me the board, and i will try my best. But like i told, should be no problem... if you can send it to asus, than try that too, maybe they will fix it for you
Hi Also erstmal brauchst du Flux, ohne flux solltest du das nicht machen. Den rest kannst du dann erstmal auf 220-280°C für 3-4 minuten und dann abkühlen lassen für 15min. Dann testen obs läuft :)
@@NSC-ModzAchso ich hätte jetzt ca 450°C für 40 sec für die apu genommen. Wäre das falsch? Sowie du es bei der PS3 GPU und CPU gemacht hast die kleinen Chips sowie der RAM etwas Kühler, weiß nicht mehr genau wie viel du da für die genommen hast hätte vor versuch mir das nochmal angeschaut. Ein Potentiometer müsste auch rein den würde ich dann mit Kabel aus dem Gehäuse rausschauen lassen und so das man ihn auch abstecken kann falls man das Gehäuse nochmal öffnet. Ein Temperatur Senor wäre überflüssig. Achso und was hälst du von der Thermal Grizzly Kryosheet, könnte man den auf der ps4 apu legen dann bräuchte man keine Wärmeleitpaste mehr?
@@myoccultrealityfor pro people not, for beginners yes, but that's why i got Videos for beginners also. If i can help with something, just let me know.
I learn a lot from you my friend mr. NSC. thank you ☺♥
I thank you to, and you always very welcome ✌️
Great video! Keep on doing great stuff NSC
Thank you so much, i always try my best for u guys! You always welcome🥰
Long time no see NSC we miss your videos bro
Yeah, i miss my videos to 😂 Gonna try to make some more often, I'm sorry 😅
Great video! Keep on doing great stuff NSC
Will do, thank you so much.
عمل رائع جدا شكرا لك
مرحبًا بك دائمًا
Thanks for making the video! 😊 Great teaching tutorial, too. I locked myself, I don't know how, out of my bios with admin password, but I ordered one. However, I have experience with programming MCUs using Microchip Studio 7 and other software, and so thanks to your video, I will attempt a more hands-on approach. It's going to be fun 😁. Peace ✌️
You always welcome 🥰
Thank you for the informative video, but i want to ask why you do not use the ezp2109+ i saw you have it. i think it is a bit faster in writing only reading and erasing are similar.
Your welcome. Yeah, i just love this one, and the other one is not really faster. Important is also, slower working means also better change for success bios writing.
Grüße an Dich mein Bester! Ich erinnere mich noch in der Ps3 Modding Hochphase an deine Videos zum IHS Köpfen und so. NSC.... in da place to be... haha legendär!
Bist immer Willkommen 😀
Brilliant video yet again. Could you do another video like this for programming the Asus ROG Strix X570-F Gaming motherboard BIOS chip (with the chip fully removed off the motherboard) please. I'm requesting this because i bought one of these motherboards (which cost a fair bit of money btw) and after i carried out the BIOS firmware Update it bricked the chip completely. Now the BIOS chips on these boards have muliple solder contacts on all 4 sides of the chip and i wasn't sure what type of programmer i'd need to buy to flash a new BIOS chip. I had searched and searched online for a new replacement BIOS chip for the A/R/Strix X570 motherboard and drew a blank. So i ended up returning the motherboard back to Asus RMA for a full refund of my money.
Thank you 🤗 Yeah, i could do a video about, but i got not the same board here. As i remember it's a Winbond Chip with 16 or 32Mb If it's bricked, you can just reflash it. You need the same programmer like in this video with the tool NeoProgrammer. Otherwise send me the board, and i will try my best. But like i told, should be no problem... if you can send it to asus, than try that too, maybe they will fix it for you
"Trust is good, but control is better".
MSC Modz.
Yeah, you say it 😀🤗✌️
hi mr.nsc may i know what type of wire to used? to connect to the motherboard
You can use every thin IDE Cable
More than half of these CH314A programmers don’t work for me. I’ve wasted days of my life with them. :(
I bet i can Help you out :)
This could be the reason, why it has not worked:
ruclips.net/video/5NYe21nFSDI/видео.html
Hi nsc wie viel Grad benötige ich um die ps4 apu mit der heißluftpistole zu rewflowen und wie lange?
Vielen Dank im Vorraus
Hi Also erstmal brauchst du Flux, ohne flux solltest du das nicht machen. Den rest kannst du dann erstmal auf 220-280°C für 3-4 minuten und dann abkühlen lassen für 15min. Dann testen obs läuft :)
@@NSC-ModzAchso ich hätte jetzt ca 450°C für 40 sec für die apu genommen. Wäre das falsch? Sowie du es bei der PS3 GPU und CPU gemacht hast die kleinen Chips sowie der RAM etwas Kühler, weiß nicht mehr genau wie viel du da für die genommen hast hätte vor versuch mir das nochmal angeschaut. Ein Potentiometer müsste auch rein den würde ich dann mit Kabel aus dem Gehäuse rausschauen lassen und so das man ihn auch abstecken kann falls man das Gehäuse nochmal öffnet. Ein Temperatur Senor wäre überflüssig. Achso und was hälst du von der Thermal Grizzly Kryosheet, könnte man den auf der ps4 apu legen dann bräuchte man keine Wärmeleitpaste mehr?
os arquivos nao existem mais pra download
@@facebookvideos5232 e por causa destes idiotas aqui que fazen report au link. O segundo link funciona e tem todo que e preciso...
Ok amigo vou dar uma olhada no outro link obrigado
What exactly are you doing here?
Testing stuff like you see
Complicated tutorial.
@@myoccultrealityfor pro people not, for beginners yes, but that's why i got Videos for beginners also. If i can help with something, just let me know.