Replacing Rear Strut 2008 RX 8

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 10

  • @jamiecampbell3068
    @jamiecampbell3068 Год назад

    David, THANK YOU. After viewing many others' attempts, I am very grateful to have found yours. ❤ Have a blessed day, sir !!!

    • @HandyDoc
      @HandyDoc  Год назад +1

      You are most welcome Jamie. I hoped it helped! Thanks for the positive comments!

  • @xeponx
    @xeponx Год назад +3

    Know you've probably searched it up, but the sensor at 6:10 and 16:20 is for the auto leveling headlights. There should be another sensor on the front lower control arm as well.

  • @DaGhostChild
    @DaGhostChild 9 месяцев назад

    That RX-8 rear suspension rides higher than mine, and I have my 4 wheel suspension changed 2 months ago. Could this part (Strut Bumper) with reference F152-28-1A1A be the reason if it's a bit worn out?

  • @eztargit
    @eztargit 2 года назад

    thank you for the heads up, getting ready to do mine soon.

  • @longrange9131
    @longrange9131 Год назад

    Very helpful information, thank you

  • @markrodriguez5334
    @markrodriguez5334 2 года назад

    Thanks 😊

  • @xESPplayer500x
    @xESPplayer500x 2 года назад

    You should have put car on jack stands, removed both control arms, and used floor jack under the rotor hub to adjust height

    • @HandyDoc
      @HandyDoc  2 года назад +1

      Well, my method worked for me!

    • @xESPplayer500x
      @xESPplayer500x 2 года назад

      @@HandyDoc this is true but in the future it might be easier and without touching your alignment. Thanks anyway for the info