Hey mate, did you have any trouble fitting the upper control arms? I got a set from ebay but the appear to be 2-3mm to narrow at the top mount - could probably force them in but I didn’t think that would be right…
Hi boss. I lift my triton front using spacer 18mm lifted to 1 1/2 and change to extended 50mm ball joint fitted in stock upper arm so that i no need to take out the stopper that seat under the upper arm. My problem is the tyreman unable to adjust the alignment to 0” and tyre a little bit outside position from upper side. They advise me to change back to original length ball joint or should i upgrade my upper arm just like yours in the video so that i can get correct and proper alignment? ✌🏻 thanks.
the 2inch increase in front is causing big hole around the wheel arch, happened to me,myb need to change tire to 265/65/18 to compensate for that ahaha
No, not necessary even though the after-market coil is 40mm taller then the stock, making the front end level with the rear end. I added the upper arm because my next project is to lift the truck another 2” making it total of about 3” 1/2,…you can see it in one of my videos.
Nk tya..sy bru beli rear absober PNK utk Fortuner 2009...ok x..kalau tuka belakang saja...belinskali dgn coil spring mcm dalam vid ni..tp belakang saja...
Hi bro, could u describe how is the ride and handling after install this pnk ? This video is just the normal replacement of suspension upgrade and not uplift yet correct?
b0ss mahu tanya upper arm utk triton 2021 ada saiz ke ?? knp sy pakai jenama JS1 utk lif up 2 inci susah mahu Alignment tayar..tayar keta sy makan luar abis ejas sudah...6 kedai sy pergi area kk ne semua ckp mslh dgn upper arm.. boss tlog cari penyelesian mslh keta sy ne
Yes…absorber rm1xxx(4pcs), upper arm rm7xx, spring rm6xx, plus labour about rm2xxx.xx. All this can get Seri Kembangan Taman Equine Park. shop name is PNK absorber 👍
After few years , your absorber still running strong ? Is it more cheaper install in Thailand ?
No issue at all, still using it…Thailand is cheaper, I did it here bcoz shop is near by my house n if any issues I can always drop by the shop.
Hey mate, did you have any trouble fitting the upper control arms? I got a set from ebay but the appear to be 2-3mm to narrow at the top mount - could probably force them in but I didn’t think that would be right…
Mine just slide in perfectly no issue at all
Hi boss. I lift my triton front using spacer 18mm lifted to 1 1/2 and change to extended 50mm ball joint fitted in stock upper arm so that i no need to take out the stopper that seat under the upper arm. My problem is the tyreman unable to adjust the alignment to 0” and tyre a little bit outside position from upper side. They advise me to change back to original length ball joint or should i upgrade my upper arm just like yours in the video so that i can get correct and proper alignment? ✌🏻 thanks.
Yes need to change upper control arm and if you going to lift more 3” advise install front diff drop kit it will lessen the cv angle
the 2inch increase in front is causing big hole around the wheel arch, happened to me,myb need to change tire to 265/65/18 to compensate for that ahaha
Nice setup Sir! Can i ask, is it necessary to replace the upper arm too? When you replace the coil and absorber, will the height increase?
No, not necessary even though the after-market coil is 40mm taller then the stock, making the front end level with the rear end. I added the upper arm because my next project is to lift the truck another 2” making it total of about 3” 1/2,…you can see it in one of my videos.
@@WeekendWarriorX Thanks for the feedback Sir.
Can i know, after changing to PNK. How was the performance and comfort? Is it good?
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Where can I buy sir the suspension set for upgrade? Can I order it online? What is the description for Strada 4x2 2019 model? Thanks!
Click on this link you can find it here…
shopee.com.my/pnk.official
Does this kit helps to make the ride smoother? I have Mitsubishi L200 Sportero 2016
Much better then stock
Nk tya..sy bru beli rear absober PNK utk Fortuner 2009...ok x..kalau tuka belakang saja...belinskali dgn coil spring mcm dalam vid ni..tp belakang saja...
I like this stayle
How much does a set cost?
About rm2500
@@WeekendWarriorXCan we exchange contacts? Where is your store? Is it also the same price to go to your store for installation?
@@chunyinloh766 I don’t have a store but check in the description there is a shopee link where you can buy this
Hi bro, could u describe how is the ride and handling after install this pnk ? This video is just the normal replacement of suspension upgrade and not uplift yet correct?
Alot more comfortable than the stock one but of course not like car comfort
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
b0ss mahu tanya upper arm utk triton 2021 ada saiz ke ?? knp sy pakai jenama JS1 utk lif up 2 inci susah mahu Alignment tayar..tayar keta sy makan luar abis ejas sudah...6 kedai sy pergi area kk ne semua ckp mslh dgn upper arm.. boss tlog cari penyelesian mslh keta sy ne
Install diff drop kit, it will help abit
Hi bro, can share the link where you got the suspension please?
Click on the description the link is there
The front is Now tougher than before?
The front cover still got plastic material.
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Did it improved handling in cornering?
Yes much better then stock
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Lepas naik 2inci depan bos.. keras tak spring H tune tu dri standard?
More comfortable 👍
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
What is the upper arm brand?
PNK Thailand brand can check this link shopee.com.my/pnk.offical
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Hii bro. How much its cost? Tq
about RM2500
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Nice!!! 🙂
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Tingala naman starada pag my karga na
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
Berapa total kos tukar?
About rm2500
@@WeekendWarriorX owh ok2 tq 4 info
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.
serius la tuan rm2500 termasuk upper arm
Yes…absorber rm1xxx(4pcs), upper arm rm7xx, spring rm6xx, plus labour about rm2xxx.xx. All this can get Seri Kembangan Taman Equine Park. shop name is PNK absorber 👍
Do check and follow my instagram 4x4mitsubishitriton
This will really help to boost more content for you guys in the future…remember “Keep it simple”.