I’ve had Mighty Hoops for many years (in almost every size and multiples in some sizes) and use them exclusively. I purchased the tubular support several years ago as soon as it was released. I keep it on my machine 100% of the time so that it supports the extra weight of the hoops and garment.
YES! It helps so much, I had no clue about it, such a huge help! I have embroidered so many sweatshirts this week and it has been so awesome!! Thanks for your comment Rosanne!
@@TheMonogramMompreneur The dealer that previously serviced my multi-needle machine wasn’t keen on the Mighty Hoops due to the weight of the hoops. I told them I use the support arm and that seemed to relieve their concerns. I use my support arm 100% of the time. Good to see you, Ashley. 💖
I'm very thankful that you got a new magnetic hoop, and explained about how to be careful with it, if you had a pacemaker. I was told not to get the new Babylock Solaris Vision, as it messes with a Pacemaker. My husband has a Pacemaker Defribulator, and I know if I had that machine, he would want to see what it does. That would be a scary thing. I wonder how close do you have to be to the magnetic hoop for it to cause a problem?
Hi love your videos and I decided to buy the hoop master system. Can you please make a video hoop small toddler shirt with the hoop master system please 🙏.
Thanks for the great video. I have a one needle machine for now. One day when my business grows I will add the multi needle. Quick question. Where did you get the little dots that you mark with from?
I can't tell you how happy I was to see a new video from you, Ashley! Thanks so much for the information on the tubular support! I had no idea this was even available and I know it will be helpful when I start to use my new 8 x 13 mighty hoop!
Aww thank you so much!!! ❤ I am so glad it was helpful !!! And I can't take the credit the wonderful phone tech at mighty hoop suggested I use the tubular support with my 8x13 mighty hoop and my mind was blown too because I hadn't really seen anyone use it!! So I am so glad it was helpful, and I will say I have embroidered quite a few sweatshirts since that video and it has just been amazing vs using my regular hoop!!! Thank you for your sweet comment!!! Hope you have great day!
For the bigger hoops embroidering sweatshirts/heavier items I would definitely recommend! It will not only help protect your machine but also help keep the hoop from sagging while embroidering! For the 5x5 hoops, no you don't need it! Hope this helps!
Mine are coming today. I had a set years ago but sold them when I sold my machine. I decided I wanted to start embroidery again and just purchased a new Brother 6 needle. The first thing I ordered was a new set of Mighty Hoops. Thank goodness I kept the hooping stations, so I didn’t have to replace them. I haven’t embroidered anything yet because I refuse to use the Brother hoops.😊
Thank you! Congrats not the new machine! So I bought the Auntie design, so, its not a font and the person who made it curved it!! Its linked in the description if you want to checkout her stuff, she has so many words in that font! hope this helps!
You are helping me so much as I learn about my own Brother 6 needle. I have one question - do you have to choose a size hoop in the machine when you use a Mighty hoop so that the embroidery field is big enough? Using the 8x13 as you did today, did you just choose the largest hoop size? I’m saving up to get the MH system.
aww thank you so much! So I just adjust my frame to the spot that fits the 8x13 mighty hoop and it registers as my big brother hoop (300mmx200mm or 11.8" x7.9"frame) so make sure you trace and you should be good to go!!!
I didn't embroider the sleeve in this video but I use my fast frames currently for sleeve! I think mighty hoop might have a sleeve hoop but I haven't bought that one yet!!!!
Love all your videos. Do you mind sharing why you have decided to use the no show polymesh rather than like a regular medium weight cut-away? Do you get less puckering or is it just a preference?
@@TheMonogramMompreneur ok that's so good to know. Is there a reason you don't just hoop it and stick it on with the spray instead? Learning so much from you.
Hmm Im not sure that it would work for fast frames!!! But I am sure if you call they may be able to help answer your question! The tech staff is awesome at Mighty Hoop/HoopMaster!
No shame in the single needle game!!! I started on a single needle too and that's exciting you are starting your embroidery journey! Yes Mighty Hoop /Hoopmaster have a device that will help you hoop items. Its called the Hoopmaster I believe home edition or something like that! I don't believe they have Mighty Hoops for single needle machines though! So Floating (a technique for embroidering hard to hoop items) will be your new best friend! Hope this helps! - Ashley
Help, I have used the same design & I ordered the tubular support, which I received today. I’m using my 8x13 mighty hoop, and I keep having this issue with the design stitching out of place, even with the tubular support. Any suggestions??
Yes, Make sure your item is hooped tight!! There shouldn't be a lot of slack in the shirt/ sweatshirt once hooped! You should almost be able to tap the shirt like a drum vs having it loosely hooped! If it feels loose once you have hooped you can gently pull (top bottom, left right) after its hooped, just be careful not to ruin your center placement! Also, Make sure your stabilizer is bigger then the hoop, so the tension and stability is there! You can also add another Layer of stabilizer to help support the stitches! Hope this helps!!! -Ashley
the hexagon thing and the flower lol. I love your videos, my wife and I just started embroidering and your videos are helping alot
I’ve had Mighty Hoops for many years (in almost every size and multiples in some sizes) and use them exclusively. I purchased the tubular support several years ago as soon as it was released. I keep it on my machine 100% of the time so that it supports the extra weight of the hoops and garment.
YES! It helps so much, I had no clue about it, such a huge help! I have embroidered so many sweatshirts this week and it has been so awesome!! Thanks for your comment Rosanne!
@@TheMonogramMompreneur The dealer that previously serviced my multi-needle machine wasn’t keen on the Mighty Hoops due to the weight of the hoops. I told them I use the support arm and that seemed to relieve their concerns. I use my support arm 100% of the time.
Good to see you, Ashley. 💖
I'm very thankful that you got a new magnetic hoop, and explained about how to be careful with it, if you had a pacemaker. I was told not to get the new Babylock Solaris Vision, as it messes with a Pacemaker. My husband has a Pacemaker Defribulator, and I know if I had that machine, he would want to see what it does. That would be a scary thing. I wonder how close do you have to be to the magnetic hoop for it to cause a problem?
Hi love your videos and I decided to buy the hoop master system. Can you please make a video hoop small toddler shirt with the hoop master system please 🙏.
Thanks for the great video. I have a one needle machine for now. One day when my business grows I will add the multi needle. Quick question. Where did you get the little dots that you mark with from?
I can't tell you how happy I was to see a new video from you, Ashley! Thanks so much for the information on the tubular support! I had no idea this was even available and I know it will be helpful when I start to use my new 8 x 13 mighty hoop!
Aww thank you so much!!! ❤ I am so glad it was helpful !!! And I can't take the credit the wonderful phone tech at mighty hoop suggested I use the tubular support with my 8x13 mighty hoop and my mind was blown too because I hadn't really seen anyone use it!! So I am so glad it was helpful, and I will say I have embroidered quite a few sweatshirts since that video and it has just been amazing vs using my regular hoop!!! Thank you for your sweet comment!!! Hope you have great day!
Great video! Do I really NEED the tubular support? will it work well without it?
For the bigger hoops embroidering sweatshirts/heavier items I would definitely recommend! It will not only help protect your machine but also help keep the hoop from sagging while embroidering! For the 5x5 hoops, no you don't need it! Hope this helps!
Mine are coming today. I had a set years ago but sold them when I sold my machine. I decided I wanted to start embroidery again and just purchased a new Brother 6 needle. The first thing I ordered was a new set of Mighty Hoops. Thank goodness I kept the hooping stations, so I didn’t have to replace them. I haven’t embroidered anything yet because I refuse to use the Brother hoops.😊
I just received my mighty hoop kit the other day! Went to Long Beach event and bought it ❤
Aww that's so exciting!!!! It's a game changer for sure! Have fun with your new toy!!!
I never would have bought this hoop without your demonstration. Can’t wait until it gets here ❤
Aww yay!!!! You will really love it and how much easier it is then regular hoops!! Excited for you!
You stated the hoop was not recognized by your machine. What do you mean by that. Loved the video
I love watching your videos. Thank you for sharing the struggles and the fix. Have a blessed day!
❤Thank you so much, your are too kind!!!!
I’m so happy for this video. Please more problem solving videos 😊 Thank you
aww thank you!!!! Oh I make plenty of mistakes so yes I will start trying to film more problem solving videos!!! Thanks for your comment!
Love your videos! Do you remember the name of the font for Auntie? It is so nice. I just bought Brother 6 needle and on beginning of learning curve 😬
Thank you! Congrats not the new machine! So I bought the Auntie design, so, its not a font and the person who made it curved it!! Its linked in the description if you want to checkout her stuff, she has so many words in that font! hope this helps!
You are helping me so much as I learn about my own Brother 6 needle. I have one question - do you have to choose a size hoop in the machine when you use a Mighty hoop so that the embroidery field is big enough? Using the 8x13 as you did today, did you just choose the largest hoop size? I’m saving up to get the MH system.
aww thank you so much! So I just adjust my frame to the spot that fits the 8x13 mighty hoop and it registers as my big brother hoop (300mmx200mm or 11.8" x7.9"frame) so make sure you trace and you should be good to go!!!
Hi, Ashley, I will definitely need one 🙈 what hoop size do you use for the sleeve?
I didn't embroider the sleeve in this video but I use my fast frames currently for sleeve! I think mighty hoop might have a sleeve hoop but I haven't bought that one yet!!!!
@@TheMonogramMompreneur Thank you Ashley!!
Love all your videos. Do you mind sharing why you have decided to use the no show polymesh rather than like a regular medium weight cut-away? Do you get less puckering or is it just a preference?
It's a personal preference! Polymesh is more flexible so it doesn't feel as bulky when wearing vs a traditional cutaway!
@@TheMonogramMompreneur ok that's so good to know. Is there a reason you don't just hoop it and stick it on with the spray instead? Learning so much from you.
So glad to see your videos!! Thank you for sharing your expertise!!!
Aww thank you so much!!! So glad it was helpful!
I plan on getting the Hoop Master Home Edition for my single needle Brother NQ 1700e
Looks great! Glad you shared this video!
I got mine just the other day and LOVE IT! I also used your code for free shipping !!! Thank you !!!
Yay! How exciting, glad you are loving it!!!
I love my mighty hoops but I've never seen the tubular supporter. I must buy it. Thank you si much. You are beautiful
You are so welcome!!! Yes I didn't know about the tubular support until recently either! It works awesome, you will love it!
Good to see a video from you again. Missed seeing your videos
Thank you so much for your sweet comment!!!! Glad to be back!
Love watching your videos. Can you tell me what size design you used on shirt.
Thank you ❤! I used the 6x10 size design!
I use the fast frames frequently, do you think the tubular supporter would help with the weight distribution like it does on the mighty hoop?
Hmm Im not sure that it would work for fast frames!!! But I am sure if you call they may be able to help answer your question! The tech staff is awesome at Mighty Hoop/HoopMaster!
Hoop master is on my wish list still waiting on my machine to be delivered to my distributor!
Exciting!!! Congrats on your new machine!!!
My hoop that came with my machine has always done that and it’s new . I got frustrated and bought mighty hoops .
Hey Ashley!
Thanks for sharing this. Great info!
Thank you for being here!!! you are so welcom , glad it was helpful!
So, if I’m cheap because I’m brand new to embroidery and bought a single needle brother machine- do these help me or only with bigger machines?
No shame in the single needle game!!! I started on a single needle too and that's exciting you are starting your embroidery journey! Yes Mighty Hoop /Hoopmaster have a device that will help you hoop items. Its called the Hoopmaster I believe home edition or something like that! I don't believe they have Mighty Hoops for single needle machines though! So Floating (a technique for embroidering hard to hoop items) will be your new best friend! Hope this helps! - Ashley
Help, I have used the same design & I ordered the tubular support, which I received today.
I’m using my 8x13 mighty hoop, and I keep having this issue with the design stitching out of place, even with the tubular support.
Any suggestions??
Yes, Make sure your item is hooped tight!! There shouldn't be a lot of slack in the shirt/ sweatshirt once hooped! You should almost be able to tap the shirt like a drum vs having it loosely hooped! If it feels loose once you have hooped you can gently pull (top bottom, left right) after its hooped, just be careful not to ruin your center placement! Also, Make sure your stabilizer is bigger then the hoop, so the tension and stability is there! You can also add another Layer of stabilizer to help support the stitches! Hope this helps!!! -Ashley
Do you need the tublar support for your melco machine?
That's an excellent question!! I will have to ask and get back to you!!
@@TheMonogramMompreneur thank you !
Hi very nice video. I have the mighty hoops I love them they are great. I also have the brother 6 needle machine awesomw machine. Thank you.