Aqui no Brasil poderia existir esses tipos de cuidados com as vias, mas aí lembramos que aqui eles investem em presídios fora a corrupção e acabam esquecendo de pensar no bem da sociedade!
The Insta-Cement 5000 is extra impressive. The way it mixes all the dry material with no water at all is pretty nifty. Seems like it would squeal like a million nails on a million chalkboards - but it doesn't.
Feeding a steady stream of water to these hole boring machines would go a long way to: 1) keeping the noise level down, 2) remove most of the hazardous dust from being inhaled by workers or settling on nearby cars, 3) improve the speed of the hole cut, and 4) substantially remove damage to the drill teeth. Speaking from experience.
Germans work extremely fast, when they build a whole housing complex, it merely takes a a month or less, and the work is clean/professional and stunning and the best part is that you only see a handful of people. In the US it takes years. When shopping in Germany you don't have to wait 20 minutes at the shopping isle waiting to pay, thing are done "blitz artig" super fast. You come here to Walmart or any other shopping centers and you wait 30 minutes to pay, i had to get accustomed to this slow lifestyle. And then if you are employed by a company here in the US and you have the German work ethic and finish things fast, your coworkers will hate you, they'll say "you think you're better". The worst part of all is that they'll let you do all the work (a 4 man job) by yourself while they're out in the break room chattering. But you guys are amazing at engineering. Germans and chinese are on a different level when it comes to working. I admire German products they are built to last. I once had a few tshirts and they lasted for over a decade. I mean i always say if you want good and professional work done with speed call a German.
cafeta but then again if you want work done right not half assed you do It the American way instead of going fast to get it done the third one only needed 1 guy but whatever you’ll end up getting killed for those kind of comments
@@guopa1 thank you for praising Germany ^^ I never know that you think about us like this I know we're famous for our high quality but I never know we're famous for our working speed too. Greetings from Germany ✌️
@@guopa1 lol another pro german anti American circle jerk comment. Americans don't take years to build stuff. We built alot of studiums, houses and skyscrapers in short periods
Lol that job with the auger bucket... you might as well have ordered a load from the plant by the time you mix all those bucket fulls and add the cost of a bucket you can only use to mix cement.
In the shitthole of Michigan they don't use levels or tape measures. 2 inches above the road level or two inches below is good enough for a manhole. They give us rumble strips.
And then they patch the highway instead of redoing it, and it doesn’t last and they have to do it again in five years. I know. I live right next along the I69 corridor.
Parfait cette superbe machine. Comme ça ben les villes n'auront plus besoin de 15 hommes ( 1 qui creuse et 14 qui le regarde creuser hihihihi ) pour faire un trou !!! 👍😀😀😀
The small rotating Petrol driven one, with the keypad interface was sweet that's those guys from the East for you....but then again the Germanic Unimog truck mounted grass cutter was cool too...
"replacement"??? They just paved over the existing manhole cover, and had to put a new on one. (I work in civil engineering) This way they don't have to deal with working around manhole rims. then they can more easily construct / insert the rim to the new grade with a real perfect fit.....ever driven over a sunken, depressed MH rim?
Over time the man hole cover wears so the edges of the cover and the ring are no longer square but rounded , think soup bowl shaped, when a vehicle hits one of those it can cause the cover to flip up and off the ring. The wheel of the car can go in the hole and the cover can end up coming through the floor of the car. So they have to be replaced from time to time depending on traffic. Those hole saws work well on perfect pavement but if you have any cracks it tears the road up.
Someone needs to show this to the state of Maryland so maybe they will realize that manholes can be smooth to drive over, not feel like you car is falling apart when you hit one
Some high tech equipment outside that Bobcat attachment. We got ourselves a bar clamp being used as a measuring device, and a level with a sharpie attached to it.
That's a cool lawnmower... in time maybe it will be replaced with something simpler, more economical and far less wondrous.. .maybe bot rc lawnmowers... and they may do a fine job... but that's an awesome lawnmower... reminds me a little of mechanical engineering brilliance, from 1st industrial rev, thrown into the future for a good memory, inspiration etc. nice video, thanks for posting.
@@ДмитрийЗапаров-м8ь , да можно и до 10-20 см в глубину, пох, должны же "приносить прибыль" на сто и в магазины автозапчастей. А так будет больше безработица ))
The concrete at 3:50 should never be this wet. Way to much water. Concrete should be moist not wet. Too much water Causes the cement to cure unstable and later fractures. But then again it's city work.
Thank you for that...I just wanted to reach through the dang screen! I still dont feel like he did it well..... Im not OCD, but that video pushed me pretty hard...lol
Second tool is smart tool, but it's not smart to cast the pipe. if you ever need to get to iy again you'er gonna have tough time breaking through that cement
fast, efficient and clean job... very nice... *in my country is not like this*
this was increased 1000 times, a project like this is normally two years
Such dramatic music for fixing a man-hole cover.
Вот нам бы таких спецов
الحمد للله على نعمة الاسلام وأشهد أن لا إله إلا الله وأنا محمدا رسول الله
كوم بي
*The replacement of that manhole was incredibly smooth and well-executed.*
Did anyone else like the sound of the cement being mixed?
Fantastic machines ! 🛠️
Научите пожалуйста и русских так делать
Wawww se jeant thanke you very match forever goode job 👍👍👍👍👍💪💪💪💪🌹🌹🌹
Hello i am from Indonesia
Wow Fantastic
Aqui no Brasil poderia existir esses tipos de cuidados com as vias, mas aí lembramos que aqui eles investem em presídios fora a corrupção e acabam esquecendo de pensar no bem da sociedade!
João Depetriz
5:55 Probably should have something around the drill to prevent flying asphalt. That Mercedes SUV would be an expensive boo boo.
Wow keren 👍👍
That's art.
Humans are awesome.
Круто.
Que top que coisa linda de se ver, esse país é maravilhoso!
Amazing 👌👍😊🌷💙👏
Igual que en Argentina 😫. A años luz Estamos!
The Insta-Cement 5000 is extra impressive. The way it mixes all the dry material with no water at all is pretty nifty. Seems like it would squeal like a million nails on a million chalkboards - but it doesn't.
Feeding a steady stream of water to these hole boring machines would go a long way to: 1) keeping the noise level down, 2) remove most of the hazardous dust from being inhaled by workers or settling on nearby cars, 3) improve the speed of the hole cut, and 4) substantially remove damage to the drill teeth. Speaking from experience.
that was the the most world amazing thing I have ever seen and i have seen many world amazing things
الله يوفقكم واتمنالكم السعاده بحياتكم لان تعملون لوطنكم باخلاص
công nghệ tiên tiến quá.... good
ต่างจากประเทศไทยเยอะเลย
in Germany they only need 2 people for this kind of work
Germans work extremely fast, when they build a whole housing complex, it merely takes a a month or less, and the work is clean/professional and stunning and the best part is that you only see a handful of people. In the US it takes years. When shopping in Germany you don't have to wait 20 minutes at the shopping isle waiting to pay, thing are done "blitz artig" super fast. You come here to Walmart or any other shopping centers and you wait 30 minutes to pay, i had to get accustomed to this slow lifestyle. And then if you are employed by a company here in the US and you have the German work ethic and finish things fast, your coworkers will hate you, they'll say "you think you're better". The worst part of all is that they'll let you do all the work (a 4 man job) by yourself while they're out in the break room chattering. But you guys are amazing at engineering. Germans and chinese are on a different level when it comes to working. I admire German products they are built to last. I once had a few tshirts and they lasted for over a decade. I mean i always say if you want good and professional work done with speed call a German.
cafeta but then again if you want work done right not half assed you do It the American way instead of going fast to get it done the third one only needed 1 guy but whatever you’ll end up getting killed for those kind of comments
I'm sure farts don't stink Germany either
@@guopa1 thank you for praising Germany ^^ I never know that you think about us like this I know we're famous for our high quality but I never know we're famous for our working speed too.
Greetings from Germany ✌️
@@guopa1 lol another pro german anti American circle jerk comment. Americans don't take years to build stuff. We built alot of studiums, houses and skyscrapers in short periods
好厲害',👍👍👍
wow good job!!!
Lol that job with the auger bucket... you might as well have ordered a load from the plant by the time you mix all those bucket fulls and add the cost of a bucket you can only use to mix cement.
So that's what road construction looks like!
بالعدالة تسود الامم وبالظم تنهار الامم والله خيرات العالم العربي تكفي كل العالم لكن أين الامانه والعدالة
In the shitthole of Michigan they don't use levels or tape measures. 2 inches above the road level or two inches below is good enough for a manhole. They give us rumble strips.
And then they patch the highway instead of redoing it, and it doesn’t last and they have to do it again in five years. I know. I live right next along the I69 corridor.
In India, this type of pot hole is a beauty of road. One can see very clearly pot hole in road.
شيء جميل 😯
Waooooo good.
Hi is the harbor fright? Yah so do you guys have any 3 and a half foot hole saws in stock?
Qgxynfurcj
😂😂😂😂
Yes, they are $3.99 /Ea.
TheDankAtheist hahahahahahahahahahahahaha
Proofreading is your friend. Back to school!
Nunca pense ver hacer el trabajo de construccion tan facil
Sweet equipment inventions!! Need silica PPE on when throwing up dust working on the roads though.
اتمنى هذا الشغل في العراق😥😥😥😥😥
no brasil teria 300 pessoas trabalhando e demoraria uns 5 anos pra terminar a obra super faturada
Como é bom morar em um país onde seus impostos são revertidos de forma correta!
E mesmo
Isso tem q ser Japan
См
@@fabioramossantos pmu
Não é do Brasil?
Love that mounted concrete mixer.
Parfait cette superbe machine. Comme ça ben les villes n'auront plus besoin de 15 hommes ( 1 qui creuse et 14 qui le regarde creuser hihihihi ) pour faire un trou !!! 👍😀😀😀
Amezing technology super
Amazing work by these workers cheer up
Most of these machines is invented in Europe . i love Europe products they are will designed and high quality .
I lived in England for 5 years never saw them cut grass on roadways
Imagine quanto ia custar esse reparo para os cofres da prefeitura aqui no Brasil algo beirando os milhões
very nice workmanship.
American ingenuity. Love the flag in the background.
Bagus bagus alat nya
工作态度很不错，设备齐全，分工明确，效率高
Turkish road constructers have a lot to learn from you guys, well done!
Загнивающий Запад.
less bad music and more actual sounds of world amazing machinery please
كذا شوارع الرياض كلها 😂😂😂😂😂
Q lindas máquinas quisiera algundia trabajar ahi
Hello good morning my friend nice vedio
สุดยอดจริงๆครับ
How did I end up here. I couldn't breath with the first one and the music while reading the comments.
맨홀뚜껑 교체공사 한국에선 3일또는4일걸릴꺼 외국에선 몇시간만에후딱하시내요 그게좀부러운점이내요 그리고바로그자리서 콘크리트 반죽하고 바로 그자리서일끝내고 대단해요
That manhole replacement was pretty damn slick
The small rotating Petrol driven one, with the keypad interface was sweet that's those guys from the East for you....but then again the Germanic Unimog truck mounted grass cutter was cool too...
"replacement"??? They just paved over the existing manhole cover, and had to put a new on one. (I work in civil engineering) This way they don't have to deal with working around manhole rims. then they can more easily construct / insert the rim to the new grade with a real perfect fit.....ever driven over a sunken, depressed MH rim?
Manhole rim, only not manhole.
Đường bên nước người ta dùng máy khoan cứng vậy.
Damn those are big hole saws!!!
Your Average High School Baseball Player. That’s a big asshole saw
Over time the man hole cover wears so the edges of the cover and the ring are no longer square but rounded , think soup bowl shaped, when a vehicle hits one of those it can cause the cover to flip up and off the ring. The wheel of the car can go in the hole and the cover can end up coming through the floor of the car. So they have to be replaced from time to time depending on traffic. Those hole saws work well on perfect pavement but if you have any cracks it tears the road up.
8:17.....Some one call the Engineer, they are doing it wrong, he needs 5 other workers standing around watching him work
Thats a good one
Obviously not a council job !
The last (clip) operator was really good
great technology ......
A lambrenedetto piace questo elemento w i tombini a livello !❤️
Someone needs to show this to the state of Maryland so maybe they will realize that manholes can be smooth to drive over, not feel like you car is falling apart when you hit one
lolz so true
Thank x for sharing, thumbs up
خل يتعلم العرب ع هيج تطور وابداع
cangih nya Indonesia
Nice video! We have this lawn mowers in czech republic.
Some high tech equipment outside that Bobcat attachment. We got ourselves a bar clamp being used as a measuring device, and a level with a sharpie attached to it.
That's a cool lawnmower... in time maybe it will be replaced with something simpler, more economical and far less wondrous.. .maybe bot rc lawnmowers... and they may do a fine job... but that's an awesome lawnmower...
reminds me a little of mechanical engineering brilliance, from 1st industrial rev, thrown into the future for a good memory, inspiration etc.
nice video, thanks for posting.
fantastic machines
Amazing whole saw
Асфальт как бетон, не то что нас, щебень.
Really great tech.
Music over the top
Belas máquinas
Some great machines there, i thought Rambo was coming with the music, Great ! ! !
Aqui no Brasil nunca vai existir uma tecnologia dessas, nem tão pouco umas ruas toda pavimentadas assim
Cool machine's
أتمنى من الله العراق يستورد هذه الأليات ويعمل العمل الصحيح
La carotteuse monter sur Bob sympa.
Bonne idée.
รถตัดหญ้าแม่งอย่างโหดอะเอาสมองส่วนไหนคิดวะ ถ้าเป็นไทยนะใช้แรงเท่านั้น
Loved it
Не правильно они делают, люки должны выпирать)))
Или сантиметров на 5 ниже уровня асфальта быть. Тут явное нарушение технологии
Crazy Fox +r
@@ДмитрийЗапаров-м8ь , да можно и до 10-20 см в глубину, пох, должны же "приносить прибыль" на сто и в магазины автозапчастей. А так будет больше безработица ))
К тому же учишься экстремальному вождению, между колодцами шнырять на полном ходу...
The concrete at 3:50 should never be this wet. Way to much water. Concrete should be moist not wet. Too much water Causes the cement to cure unstable and later fractures. But then again it's city work.
Нееее,ребята! нет ничего лучше узбека,лома и лопаты
10 MUITO BOM !
4:20 CAN SOMEONE PLEASE JUST PUSH THE JAMMED ROCKS OUT OF THE GRILL!!
I was thinking the same damn thing.
Thank you for that...I just wanted to reach through the dang screen! I still dont feel like he did it well.....
Im not OCD, but that video pushed me pretty hard...lol
Как в сказке!
ياليت عندنا 😭😭👌
มาสร้างแถ้วบ้านผมบ่างดิครับ
Second tool is smart tool, but it's not smart to cast the pipe. if you ever need to get to iy again you'er gonna have tough time breaking through that cement
11:20 hardener machine most amazing👍
I love masinari