How to clean your gun
HTML-код
- Опубликовано: 11 сен 2024
- Hello and welcome to The Shooting Channel!
In every one of our videos, you'll see us wearing the top of the range electronic ear defence from our partner, SWATCOM. These ear defenders are essential for protecting our hearing on the range and we highly recommend them for any shooting enthusiast.
For a limited time only, you can get 10% OFF on SWATCOM's website using the discount code "TSC10". Just visit www.swatcom.com and enter the code at checkout to take advantage of this great deal.
Don't forget to check out our website, www.theshootingchannel.co.uk, for all of your shooting-related merchandise needs. And be sure to follow us on Instagram @theshootingchannel for updates and behind-the-scenes content.
If you have any questions regarding the equipment we use, advertising opportunities, or anything else, don't hesitate to reach out to us at contactus@theshootingchannel.co.uk. We're always happy to help.
If you want even more exclusive content, consider subscribing to our RUclips memberships using the link / @tsctheshootingchannel . You'll get access to bloopers and other exclusive content that you won't find anywhere else.
Thank you for watching!
www.oxfordguncompany.co.uk
www.theshootingchannel.co.uk
www.oxfordgunc...
www.oxfordgunc...
www.oxfordgunc...
www.oxfordgunc...
www.oxfordgunc...
www. www.muob.co.uk oxfordguncompany.co.uk/events/parties.php
www.oxfordgunc...
www.oxfordgunc...
www.theshootin...
/ theshootingchannel
/ tsctheshootingchannel
Just a couple of pointers to add to a very good cleaning video. I always put a smear of gun grease to the hinge pins and where the fore-end pivots on the action. Also i use snap caps to relieve the tension on the firing pins before storing the gun.
Thank you very much. I inherited my Dads shotguns and didn’t watch him clean shotguns as much as I should of. I know he is very happy they are clean the way he would have wanted them.
Prefer to spray cleaner down and use bronze brush then patches or kitchen roll to clean inside and then use mop to lightly oil barrels and just clean inside of action area with a brush or Cotton buds and then lightly wipe over with oily rag and apply grease to pivot areas , clean chokes and ejectors separately whilst doing barrels
Suggest you put that mop one more time trough the barrel after screwing the chokes back in. With a little to much grease/oil between the chokes and the barrel wall you get a little oil ring were the load passes from the barrel to the choke. This little oil ring can obstruct the load and damage the gun.
it's like you knew what i needed, just got my first gun and needed to know how to clean it properly haha
Great video thank you - you raised some points I never thought of e.g. relieving pressure on the top spring (@ 1:55 ). On my Bettinsoli Evo you do this by pressing down on a short rounded lever on the bottom left hand side of the action.
Incidentally phosphor bronze brushes, mops etc clean up well by shaking them gently in a jam jar 1/2 full of Shellite (a.k.a. Recosol R55, or naptha) also used as lighter fluid etc. Just squeeze out the fluid from the mop before storing.
I use kitchen roll and never use a mop the reason is once you have used it its contaminated with crime .best to use more roll ! and I always grease the bearing surfaces very important this is , and oil ejector rails .(every time you shoot)
You always clean before putting back in the Armoury😊
good in depth clean thanks for the advise on the chokes too, I normally check mine are tight but haven't cleaned them recently
Firstly a safety thing, removing the fore end should be the second thing you do. Secondly you should be putting a small amount of gun grease on those moving parts.
I use a bore snake with a patch soaked in Hoppes powder solvent on the head of the snake. You have to punch a hole in the center of the patch then thread the snake lead through the patch. Then you can thread the snake lead into the bore.
Cleaning a gun with a shirt and tie......🙂
This is the most basic of cleaning... much more should be done from time to time.
Absolutely
Thank you for the video, I like the idea of covering the mop with patches and this is easier to push through than using a metal jag. Will try the bronze brush as well. I sometimes use an oily patch for the initial clean and this removes a lot of carbon.
Nice little video, It aways good when you see something you have done for years and then just see one or two thing new. Thanks.
Hiya mac I use the phosphor bronze brush 1st to get most of the rubbish out of the barrels then I sprite with Napier Gun cleaner then use the jag then I Walmart is a bit of oil To coat the barrels this is the right way
Scrunched up newspaper half a broadsheet size, pushed through the barrels first. Cleans most of the powder residue out. Spray your chosen gun cleaner in the barrels. Phosphor bronze brush each barrel. Then the Jag and cloth. Then the wool, with a good gun oil or spray on it. Check each bore. NEVER out the wool through straight after the brush you will RUIN it.
The rest is mostly okay.
Ones man cleans ones gun when ones bin out shootin'.
Thank you for such a comprehensive video. I'd like to ask you, can we spray a barrel from outside with oil that we use for bore cleaning, for removing led? Will not it harm bluing of the shotgun? I use Ballistol for cleaning.
Nice job but what about oiling and greesing the moving part, IE Forend to reciever joint, a touch of oil on the threads of th chokes ect, ect
Hi Mac, for regular cleaning, a wipe with the oily rag is sufficient, although a spot of oil or grease won't do any harm so long as you don't overdo it. Occasional cleaning and lubrication of moving parts such as ejectors etc is good practice - perhaps a subject for a future video.
its imperative to have metal to metal parts well oiled; a wipe with a rag is hardly sufficient
Use protection when inpregnating
Every couple of times I like to use a stiff tooth Brush and cleaner and clean the guns choke threads.
Excellent thanks 😊👍
I love how he is concerned about the greasy fingers and to get the grease off, he rubs oil over it... ;)
More of these videos please 👍🏻
Sam Kerr how?
no grease?
Very helpful vid. But place and leave in a sock in the cabinet, why is this?
If it’s a wet day I wipe it before I put it away in the slip.
What make and model of gun is he cleaning?
He,s hearts in the right place. Bless him lol. But not the way I would do it.
Very in depth tutorial. - Much appreciated.
"Only takes a couple of minutes..." 10 minutes later...
snapcaps not needed because you took the pressure of the top spring?
Hi Matt, no, that's a different spring. The top lever spring pushes the top lever across and locks the action closed. Snapcaps relieve tension in the springs that drive the firing pins. There's some debate whether it's really necessary to use snapcaps in a modern gun that is used regularly. The spring steel is very good quality nowadays and lasts well even if stored under tension. Using snapcaps might extend the life of the springs a little, but they last for years anyway and are relatively inexpensive to replace - it's up to you.
TSC Clay Shooting thanks for this info. much appreciated. Happy shooting :)
A well delivered presentation.
Sorry but that's not the way to clean a gun. Wire head head threw first with cleaning spray. Then cloth patches till most of the dirt is gone. Then mop head threw it. And then remove chokes ,clean lightly grease threads and put them back in. Who ever told or showed you how to clean a shotgun was wrong mate.
I kept wondering why "fletch lives" was throwing his wire and mop heads, then I realised he meant "through"
10:06
This is wayy overdone most people here never clean them and the guns last longer than them.
Use your girlfriend’s toothbrush……..ha-ha!!!