How-to Install Kodlin Lift and Lowering kits on the new Sportster S

Поделиться
HTML-код
  • Опубликовано: 23 янв 2025

Комментарии • 27

  • @X152535
    @X152535 Год назад +2

    does this put stress on the belt that drives the motorcycle? Could it snap off because of this?

    • @kodlinusa6155
      @kodlinusa6155  Год назад +1

      Any time you raise or lower your ride in the rear you should always check the belt tension and adjust if needed back to stock specs for tightness. This way it doesn't get too tight or loose and cause you problems.

    • @X152535
      @X152535 Год назад

      @@kodlinusa6155 Thanks

  • @brucebakken7430
    @brucebakken7430 Год назад +2

    Be carefully not to strip nut. Mine is 18mm not 19. Used a 19 like vid said and rounded off nut corners. Was able to use the correct 18mm and get it off. Mine is a 2023. Maybe size changed?

    • @kodlinusa6155
      @kodlinusa6155  Год назад +1

      Thanks for the input! Now where did I put my glasses...😂😂

  • @supermanlol67
    @supermanlol67 2 года назад +1

    Make a videofor the front led lights and also for the rear tail tidy install 😁

  • @skarvreon6736
    @skarvreon6736 5 месяцев назад

    Once you install the kit, will the motorcycle become lower? Can it be around 2”?

    • @kodlinusa6155
      @kodlinusa6155  5 месяцев назад

      Yes, once you install lowering kit it will become lower. The 1" kit will drop the bike 1" at rear of fender. No, the 1" kit will not drop the bike 2"...

    • @skarvreon6736
      @skarvreon6736 4 месяца назад

      Thank you. I’m about to order this product. I am 5’4 and I want my both feet reach the ground flat. Also, do I have to adjust anything after installing lowering kit?

  • @xcamaroxssx1969x
    @xcamaroxssx1969x 6 месяцев назад

    How much do these kits affect the lean angle

    • @kodlinusa6155
      @kodlinusa6155  6 месяцев назад +1

      That really depends on your riding style. Any lift will increase lean angle and any lowering will reduce it. If you really lay your ride over when riding, then you will scrape more when lowered.

    • @xcamaroxssx1969x
      @xcamaroxssx1969x 6 месяцев назад

      ​@@kodlinusa6155 I am looking to lift this bike if I get it, In it's stock form this bike should have roughly 34° of lean angle and I was hoping to up that by a noticeable amount

  • @toofastnobrakes
    @toofastnobrakes 2 года назад +1

    How much higher can it lift the bike? It’s way to short for me stock

    • @kodlinusa6155
      @kodlinusa6155  2 года назад +3

      Kodlin part K66028 lifts the Sportster S 1" at the rear.

    • @toofastnobrakes
      @toofastnobrakes 2 года назад +1

      @@kodlinusa6155 any plans to offer a 1 1/2 to 2 inch lift?

    • @kodlinusa6155
      @kodlinusa6155  2 года назад +2

      @@toofastnobrakes There are no plans at this point, but things can change.

    • @toofastnobrakes
      @toofastnobrakes 2 года назад +3

      @@kodlinusa6155 Ide be game to buy a 1 3/4 to 2 inch! This bike is way to low for a 6’5 rider. And needs way more clearance to match the sportiness of the motor and chassis

    • @e_skie2685
      @e_skie2685 2 года назад

      Just raises the bike... or do you also get additional travel out of the rear?

  • @efrainrico6151
    @efrainrico6151 2 года назад +3

    What would be the point of a lowering kit ?

    • @kodlinusa6155
      @kodlinusa6155  2 года назад +6

      Simply put, the point of a lowering kit is to lower the bike...lol! Why would somebody want to lower the bike? There are several reasons but here are two popular reasons I can think of, 1) they like the look, 2) they want their feet to sit flat on the ground.

    • @rickreiling3095
      @rickreiling3095 2 года назад +2

      @@kodlinusa6155 fit great on our 2022 sportster s

    • @kodlinusa6155
      @kodlinusa6155  2 года назад

      @@rickreiling3095 Awesome!😎

    • @motomike007-1
      @motomike007-1 2 года назад

      Does the lock stand need to be shortened on Pan America Special if lowering. Hope I didn’t miss that in the video. Thx.

  • @HowZay212
    @HowZay212 8 месяцев назад

    💨

  • @nimeshvala1793
    @nimeshvala1793 Месяц назад +1

    2 inches lift possible in this bike?

    • @kodlinusa6155
      @kodlinusa6155  Месяц назад

      We cannot say if it is possible to get a 2" lift, we have not tested a XLS with a 2" lift and we do not offer the parts to do so.