PA speakon jack on Aliexpress: - s.click.aliexpress.com/e/_DdYYsAZ Speakon cables on Amazon: - US amzn.to/3k7B6lf - UK amzn.to/416Fphi - DE amzn.to/4dOVcX5 Speakon cables on Aliexpress: - bit.ly/3IB6kKV - Speakon Neutrik NL2FX on Amazon: US amzn.to/3YqKZf1 UK amzn.to/46RfDQ3 DE amzn.to/46wiyOB
Hi Techscrew Your Information was great many thanks, however the main reason I looked at your site was to find out the actual connections for conductivity i e -1 and +1 for the most common connections. You seemed to assume that information was was already known, maybe I'm wrong , but that was the information i was looking or ? maybe i mossed it but the rest of the instruction was excellent.
What is the best recommendation on how to extend a speakon cable run? I need to get atleast 100ft out of a speakon cable. Connecting to passive power speakers - not sure which extender to use to ensure proper functionality
No, perderías la mitad del cable, ya que normalmente la hembra del altavoz es NL2MP para recibir NL2FX. SI haces Bridge en la etapa de potencia, conectas como tú dices al canal A ( o 1) con NL4FX que llega al otro extremo, el parlante conectado como en el vídeo en NL2FX. También se puede utilizar NL4FX para bi-amplificar ( algunas etapas de potencia caras lo permiten ) u otras características especiales... Aparte NL4FX macho no entra en la hembra NL2MP.
Hello, We call this procedure a botch. Firstly, you only use reasonable speaker cable, e.g. Sommer cable. then you use ferrules because that's just the way it is now to do. what is the biggest mistake here is you never twist two wires and then stick them in one pole, that's the biggest crap ever. and if you only use such inferior aids and no sensible tools, you can assume that these cables will not last long and will break before long.
I consider this job for amateurs. No need to use 4 wires cable just to double the wires a 3 x 2,5mm or 2 wire its enough, (those can handle more than 20 Amps) by the way always solder the ends.
PA speakon jack on Aliexpress:
- s.click.aliexpress.com/e/_DdYYsAZ
Speakon cables on Amazon:
- US amzn.to/3k7B6lf
- UK amzn.to/416Fphi
- DE amzn.to/4dOVcX5
Speakon cables on Aliexpress:
- bit.ly/3IB6kKV
- Speakon Neutrik NL2FX on Amazon:
US amzn.to/3YqKZf1
UK amzn.to/46RfDQ3
DE amzn.to/46wiyOB
Oh shit! NO soldering!! Thanks for the great video.
good luck :)
This was the most relaxing video Ive watched I'm a while
He didn't say how to take apart the nut tricks what do you do?
Hi Techscrew
Your Information was great many thanks, however the main reason I looked at your site was to find out the actual connections for conductivity i e -1 and +1 for the most common connections.
You seemed to assume that information was was already known, maybe I'm wrong , but that was the information i was looking or ? maybe i mossed it but the rest of the instruction was excellent.
Where is the positive where is the nagative??
Thanks for the video
thanks and good luck :)
very nice video, thanks
Glad you liked it!
What is the best recommendation on how to extend a speakon cable run? I need to get atleast 100ft out of a speakon cable. Connecting to passive power speakers - not sure which extender to use to ensure proper functionality
Good One
Thanks
Can I connect ..+1 and -1...+2 and -2....on one end..to both + and - on other side. ?
No, perderías la mitad del cable, ya que normalmente la hembra del altavoz es NL2MP para recibir NL2FX.
SI haces Bridge en la etapa de potencia, conectas como tú dices al canal A ( o 1) con NL4FX que llega al otro extremo, el parlante conectado como en el vídeo en NL2FX.
También se puede utilizar NL4FX para bi-amplificar ( algunas etapas de potencia caras lo permiten ) u otras características especiales...
Aparte NL4FX macho no entra en la hembra NL2MP.
Hello, We call this procedure a botch. Firstly, you only use reasonable speaker cable, e.g. Sommer cable. then you use ferrules because that's just the way it is now to do. what is the biggest mistake here is you never twist two wires and then stick them in one pole, that's the biggest crap ever. and if you only use such inferior aids and no sensible tools, you can assume that these cables will not last long and will break before long.
The biggest mistake here was using the screwdriver like that. Sure fire way to end up stabbing yourself in the palm.
Mines was pulled out my speaker how to I get it to stay in and work again
Perfect English))
Yea right lol
Can you use pin 2 on ampifire
what about 8 gauge cable? is it possible?
spec show 12-10awg, you can try 8awg and cut come wires, to fit inside.
Can I use 2.5mm cable?
of course, also 1.5mm, it all depends on power
I consider this job for amateurs. No need to use 4 wires cable just to double the wires a 3 x 2,5mm or 2 wire its enough, (those can handle more than 20 Amps) by the way always solder the ends.
spacibo!
cannot see becase very fast.
I can try to answer your questions...
Very fast......
Are you in a hurry?
no, I am from Latvia.
lmao
@@KS.81 he didnt understand
@@Techscrews , he meant your explanations were all shortcuts and not really clarified!
Bro you must tell the number
what kind of number ?
@@Techscrews , the number on the back of speakon terminal! That's what he meant!
+1/-1 is standard.