Hello, I have already bought two Pytes batteries What device should I buy to check the state of charge discharge of each cell individually I mean the health of the battery thank you in advance for your reply
This batteries have an order to turn on, you first turn on the black button for all of them then you press only the master red sw for 2 seconds..I just learned from their support team
Thanks I see that after showing us the CASE Ground Screw & the Grounding Wire included with the BATTERY - that you never attached the GROUND Wire between your Batteries - WHY ? COOP ...
Hello Friend, I have 2 pytes batteries, I followed all the steps as in the clip, with a 5 kw Growatt inverter. when I put the protocol 51 pos 36 disengage. did I reverse the communication cable and the same? do you have any ideea?
Hi, I have here in the UK 2x Voltcom E-BOX-48100R LFP battery's which I believe are the same but rebranded battery's. Voltercon Solar UK whom I purchased them from have been less than helpful when they found out I was using Growatt SPF 350 ES inverters which they do not sell. In short I need a communication cable from the inverters to the batterys can you help in any way.
Here are some other charging milestones in the session (Model 3 Performance): 2% - 10 miles - 0 mins (126 kW) 5% - 16 miles - 1 min (250 kW) 20% - 62 miles - 4 mins (250 kW) 21% - 65 miles - 4.5 mins (Taper from peak starts - 248 kW) 30% - 92 miles - 6 mins (218 kW) 40% - 123 miles - 8.5 mins (179 kW) 50% - 153 miles - 11 mins (142 kW) 60% - 184 miles - 14.5 mins (108 kW) 70% - 213 miles - 19 mins (87 kW) 80% - 245 miles - 24.5 mins (56 kW) 90% - 275 miles - 34 mins (36 kW)
Any chance you could walk through setting up these batteries with the LVX6048? Thanks!
Have a look at re connecting the long cable 1 at the top positive and 1 at the bottom negative, it may draw from the power wall more evenly.
Ian do they work with the MPP INVERTER LVX6048.
Very cool Ian.
I’ve got my 1012 inverter up and running that I got from you. It’s been great.
Hello, I have already bought two Pytes batteries What device should I buy to check the state of charge discharge of each cell individually I mean the health of the battery thank you in advance for your reply
Where can I find the software to connect my PC with the pytes through the RS232 port?
I also want to know😢
Growatt SPF 5000 ES Communicate Setting, great video.
Is it allowed to mount them with cables facing downwardly?
This batteries have an order to turn on, you first turn on the black button for all of them then you press only the master red sw for 2 seconds..I just learned from their support team
Hi is CAN port same as RS485 port? Because my battery only has RS485 port instead of CAN port. Thank you.
Thanks
I see that after showing us the CASE Ground Screw & the Grounding Wire included with the BATTERY - that you never attached the GROUND Wire between your Batteries - WHY ?
COOP
...
Hello Friend,
I have 2 pytes batteries,
I followed all the steps as in the clip, with a 5 kw Growatt inverter.
when I put the protocol 51 pos 36 disengage.
did I reverse the communication cable and the same?
do you have any ideea?
Hi, I have here in the UK 2x Voltcom E-BOX-48100R LFP battery's which I believe are the same but rebranded battery's. Voltercon Solar UK whom I purchased them from have been less than helpful when they found out I was using Growatt SPF 350 ES inverters which they do not sell. In short I need a communication cable from the inverters to the batterys can you help in any way.
Where do we buy them from?
do you know already? thanks
Have you tried Seplos comms with MPP LV6548 yet?
Those snap on connectors are from Amphenol I love them
Love the batteries just wish they came with thicker cables
Are these UL listed for NEC 2020 ?
The fastest EV charging rates occur at nearly the beginning of the charge cycle for most models. My model 3 will only charge at 250kW until 5-10% SoC.
Here are some other charging milestones in the session (Model 3 Performance):
2% - 10 miles - 0 mins (126 kW)
5% - 16 miles - 1 min (250 kW)
20% - 62 miles - 4 mins (250 kW)
21% - 65 miles - 4.5 mins (Taper from peak starts - 248 kW)
30% - 92 miles - 6 mins (218 kW)
40% - 123 miles - 8.5 mins (179 kW)
50% - 153 miles - 11 mins (142 kW)
60% - 184 miles - 14.5 mins (108 kW)
70% - 213 miles - 19 mins (87 kW)
80% - 245 miles - 24.5 mins (56 kW)
90% - 275 miles - 34 mins (36 kW)
Can you use these batteries (in series) for the SPH high voltage variants?
I don't think so. There website page tells : parallel mode (only)
Link to Batteries and Circuit breaker used here..thanks.
Very neat!
Agm? Is lead battery not lithium
Why?
Advanced glass matting IS LEAD ACID BATTERY
I think I must be dyslexic... it's going from the ears and straight to ground...
Yes👍🔋⚡ 💡
🇺🇦✌☀
Redundant mil sped multi protocol what? Lol.
It's not orange colour it is red.
Looks like Apple made those batteries.