Your s-10 Chevy is stuck on the quicksand like a boat ramp sounds awesome with v8 engine power 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
Sweet video love that Truck, in the beginning was a bit scared to look at the video. Reason why is because you mention the word Quicksand, In the beginning I kept hiding my eyes but at the same time was still trying to peek throught my fingers. Did'ent want to see you and your Truck get sallowed up.But it turned out great. Thanks for Sharing
They are only hard to find because you are looking for one. If you finally find one, they will turn up everywhere if you don't need one. Just kidding, maybe Canada only let long wheel bases in, just kidding again... Good luck with your search and thanks for watching.
man you always make such good videos with your trucks in the mud, so jealous you have a place to do stuff like that, keep them coming, we really like bog down stuck trucks in mud....so any ideas keep them coming...wish you had a Powerstroke or cummins diesel 4x4 to play in ....keep them coming.
VileV That tire squeaking secret is a secret. Some tires seem to do it all the time, some seem to never do it. The tires in my video only did it for this video when they were hot and not turning too fast. I guess it depends on a combination of the tire rubber, the pavement surface, and temperature.
+Andrew Jimenez It depends on what size engine your truck currently has. If you have a 4.3 the transmission will bolt right up to a V8. If you have any thing else, or if your transmission is worn out, you will need a transmission. If you change your transmission, chances are you are going to need a different drive shaft. A different transmission may need a new shifter and your speedo might not work with the new trans. For the swap you can plan on getting and will need; V8 swap motor mounts that adapt to what ever your truck came stock with to a V8, a different radiator, exhaust manifolds or headers, most likely you will want to go ahead and run a new exhaust system, the cross member will probably work or can be modified, and of course you will need the running V8 engine. If you truck is a 2wd the stock V8 oil will most likely work. You will have to wire up this engine. There is a fuel regulator with a bypass that you will need if you are using the stock fuel pump and carb or some people go with a more modern fuel injection. There may be somethings that I skipped, but this should give you a good idea of what is required and where to start. Thanks for watching my video and I have others that show every step of my S-10 V8 build. That is what it is called and I highly recommend it as your next step.
+Andrew Jimenez That one I used was a 307 out of a 1969 El Camino. I got a real good deal on it on craigslist and it ran good. ruclips.net/video/Du9jrTFSXKE/видео.html This is one of the many videos that I built on this build, it pretty much covers everything in less detail or you can watch the others, they go in depth.
OK, NOW YOU ARE JUST MAKING ME JEALOUS! Just kidding, yes, you can do a LS1. That is my dream. Please do and tell me how it goes. That would be the ultimate hot rod S-10. I have seen many other people do it on here, but I have not had enough funds to pull that off anytime soon. But it is on my list! If you decided to go that route, you could make me a video. Trust me, I will watch that!
I'm not sure. There is a different rearend and tall tires so my speedo is off, but I was going wide open in third at one point. I would have to guess around 100ish... But that is just a guess and that may have been with the small street tires. Did you see that video?
I would need your help to walk me thru this is my first car so still learning about everything don't have the funds right now either but hopefully by the end of this year I will
I dont really know how to work on cars and everything so I would need help I have people who can swap it but i don't know about doing the drive train and everything
Completely clickbait wow you will sink in quicksand if you just stand in it but that was just waterlogged sand so it acts a little like water and you will only Sink in it if you move and although there was a burnout not in quicksand
chud327 always love a good burn out bub, lol I don't have very many vids posted but there are a few burnout vids I think go check em out! I had a v6 ls S10 that looked like an extreme and mannn I had her ripp the whole length of a 2mi road Speedo pegged haha
Chud
Nice work as usual baking the bags!
Spin those tires.
You need to shred those rears off the rims now!
Thanks! Maybe I'll go out right now and finish them off.
Your s-10 Chevy is stuck on the quicksand like a boat ramp sounds awesome with v8 engine power 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
Miss this truck, you still have it ?
I don't have that one, but I do have another one that turned out even better. Thanks for watching and missing the old stuff!!
Sweet video love that Truck, in the beginning was a bit scared to look at the video. Reason why is because you mention the word Quicksand, In the beginning I kept hiding my eyes but at the same time was still trying to peek throught my fingers. Did'ent want to see you and your Truck get sallowed up.But it turned out great. Thanks for Sharing
Great video I get so excited watching your tire spin I would love to have my foot underneath your tire.
Lol
Ouch, but thanks for watching
Thanks for watching
What size are your back tires
Going from memory, I believe they were 225 60 15's, but in this video, I think I had some 31X10.5X15's. I hope this helps and thanks for watching.
I have everything except the frame...I live in Canada and I can't seem to find any short box frame. They all seem to be in the southern states
They are only hard to find because you are looking for one. If you finally find one, they will turn up everywhere if you don't need one. Just kidding, maybe Canada only let long wheel bases in, just kidding again... Good luck with your search and thanks for watching.
man you always make such good videos with your trucks in the mud, so jealous you have a place to do stuff like that, keep them coming, we really like bog down stuck trucks in mud....so any ideas keep them coming...wish you had a Powerstroke or cummins diesel 4x4 to play in ....keep them coming.
Thanks muddog, I enjoy doing it. I'm glad all the fans love it too. If I had a 4x4 diesel, I could also use it to pull other stuff that gets stuck...
Hows it not going sideways. When on those bricks.
I am not sure, but it was a pain... Thanks for watching
Nice S10. Burnout is AWESOME! MORE!!!!!!! :P
timmycanofFlorida give me a few days, I am working on the next video. It has burnouts, rally wheels, fish tails, and a highway test drive.
06:10 What is the "secret" to do this tire squeaking sound?
VileV That tire squeaking secret is a secret. Some tires seem to do it all the time, some seem to never do it. The tires in my video only did it for this video when they were hot and not turning too fast. I guess it depends on a combination of the tire rubber, the pavement surface, and temperature.
I have a 84 s10 and I want to swap it could you give me some advise on what I need please
+Andrew Jimenez It depends on what size engine your truck currently has. If you have a 4.3 the transmission will bolt right up to a V8. If you have any thing else, or if your transmission is worn out, you will need a transmission. If you change your transmission, chances are you are going to need a different drive shaft. A different transmission may need a new shifter and your speedo might not work with the new trans. For the swap you can plan on getting and will need; V8 swap motor mounts that adapt to what ever your truck came stock with to a V8, a different radiator, exhaust manifolds or headers, most likely you will want to go ahead and run a new exhaust system, the cross member will probably work or can be modified, and of course you will need the running V8 engine. If you truck is a 2wd the stock V8 oil will most likely work. You will have to wire up this engine. There is a fuel regulator with a bypass that you will need if you are using the stock fuel pump and carb or some people go with a more modern fuel injection.
There may be somethings that I skipped, but this should give you a good idea of what is required and where to start. Thanks for watching my video and I have others that show every step of my S-10 V8 build. That is what it is called and I highly recommend it as your next step.
Thank you so much ! I Appreciate it
+Andrew Jimenez you're welcome and be sure to check out my build video.
Do you still drive the s10
I sold it, but I am looking for my next... thanks for watching.
I will I want to put a v8 in my s10 asap ! what kinda engine you got?
+Andrew Jimenez That one I used was a 307 out of a 1969 El Camino. I got a real good deal on it on craigslist and it ran good. ruclips.net/video/Du9jrTFSXKE/видео.html This is one of the many videos that I built on this build, it pretty much covers everything in less detail or you can watch the others, they go in depth.
+Andrew Jimenez I just sent you a reply and it might get sent to spam because of my link that I included.
Would it possible to fit a ls1
OK, NOW YOU ARE JUST MAKING ME JEALOUS! Just kidding, yes, you can do a LS1. That is my dream. Please do and tell me how it goes. That would be the ultimate hot rod S-10. I have seen many other people do it on here, but I have not had enough funds to pull that off anytime soon. But it is on my list! If you decided to go that route, you could make me a video. Trust me, I will watch that!
just curious how fast ( MPH wise you can get em burnin. looks like a sweet truck bro
I'm not sure. There is a different rearend and tall tires so my speedo is off, but I was going wide open in third at one point. I would have to guess around 100ish... But that is just a guess and that may have been with the small street tires. Did you see that video?
not sure . I tried to check all of them. love burnouts :P the longer the better
Well keep watching the next video will have more burning, I should be public by morning.
This guy is the cloud fairy..
You know the cloud fairy and what he sounds like. I just happen to sound kind of like him... thanks for watching.
Nice burnout
Thanks and thanks for going back and watching some oldies...
Np man
chud327 ฃผ%
Chud smoke em slow! Check the tread depth as you go them trash em! POP!!
***** I may just do that. Thanks for the comment.
I would need your help to walk me thru this is my first car so still learning about everything don't have the funds right now either but hopefully by the end of this year I will
+Andrew Jimenez Let me know how I can help and that will be super, where are you? I am going to want to ride in this LS monster!
I live in cali
I dont really know how to work on cars and everything so I would need help I have people who can swap it but i don't know about doing the drive train and everything
What engine does your truck currently have?
2.8l
you're awesome
Thanks, I am glad you liked it! There are several more S-10, mudding, and S-10 mudding videos. Check some out and let me know what you think.
thaks youre a cool guy an the pieces of rubber left was hot indeed
Thanks, I bet you are pretty cool too.
Burnout @ 5:25...
Thanks for watching.
Your so cool man
Thanks, speaking of cool, my feet were numb after testing the quicksand.
Completely clickbait wow you will sink in quicksand if you just stand in it but that was just waterlogged sand so it acts a little like water and you will only Sink in it if you move and although there was a burnout not in quicksand
Funny acts like water and you only sink if you move, what kind of water is that?
@@chud327 it’s called a non-Newtonian fluid
You rock. and so does your S10 :)
YAAAAWWWNNNN.........BORRRINNNGG.
Why do you waste your time on old junk like that? thanks for watching.
So quema cuh
🚓
Thanks for watching.
😃
Bored much? Lmao
Yes, how about you (for watching it), but thanks for watching.
chud327 always love a good burn out bub, lol I don't have very many vids posted but there are a few burnout vids I think go check em out! I had a v6 ls S10 that looked like an extreme and mannn I had her ripp the whole length of a 2mi road Speedo pegged haha