Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
You don't sand a floor with a angle grinder. But you grind edges, in the industrial sense of epoxy over lays, with a 7" hand grinder with a shroud that that is made for the application. I used them for seven years, we also polish concrete with them as well. 12 seg diamond cups or 24 seg diamond cups. But for the big parts of the floor we used diamatic 780 pro. A planetary grinder. This dust shroud would never be used in cutting metal because fire still happens in a vacuum and the filters are flamable. But with concrete it is a MUST silica is dangerous and causes painful silicosis.
In the days when you could attach your reply video to the guy's original video, then their viewers would see your work, too. I had another channel back in the day. I met the best people here.
@@olegmorisov7726 Да а потом отрезал, и даже хамутом не закрипил, видно же что эта болда болтается, и если б не шланг от пылисоса она вращалась бы вместе с дискам
@General Pershing what are you talking about??? That orange plastic is only orange cause they mix in orange pigment... The pigment has no structural benefits what so ever. Generally though plastic like what is used in plumbing , is colour coded so it will be easy to tell apart from other things , for example when a pipe is dug up from the ground. At least that is a practice in Europe , no clue about the us.
@@TheBurnknight my science degree expired last week but I think he means that clear "plastic" is usually acrylic which is hard and brittle. While the orange thing pictures here looks like PVC. I've personally never seen clear PVC. I suspect it's an unavoidable tradeoff to be "clear" it must be hard/brittle so that it doesn't scratch and become opaque.
@@bobcougar77 PP (polypropylene) is pretty flexible and transparent at the same time (Same as polyethylene used to make water bottles, but i agree it's gonna be scratched easily, although there is one type of plastic that is not brittle and transparent at the same time - tritan, they use it in blenders sometimes)
@@__.-.__hi865 Basic sure, but for more than a few thousand dollars. If you go cheap on MOST of these you put yourself in Danger or just won't get the job done. I mean. take a few months to earn and aquire, and then have a good garage! But if you're on a real job, the best tools cost more than a middle-class car.
A shroud for your grinder is probably the last thing I would hand make. Buy one for 60$ and have it for a lifetime if you use it on small projects. I use one everyday for work and haven’t had to change one out yet
I don't understand all the hate people have in these comments for this video. It's pretty well put together. And the idea obviously works. It might not be needed for everyone but there is definitely someone out there who needs something like this I guarantee it.
you could save yourself time and just avoid the second hole. If you put that collar on an angle grinder, I guarantee you won't have any dust to worry about.
Yeah... All of mine have been removed. Used them for years and years. You just stay out of line with whatever disk and you'll be fine. Wear gloves, sleeves, glasses and a face shield you'll be just fine.
@@jibblesq good luck to you. I prefer to stay safe. Theres a proper tool for every job out there. It's just that this is ... Well unsafe. I've took a few hits with a lot of those discs and know to never tamper with what little protection there is on an already lethal system.
Might actually be good for someone panning to grind their concrete floor and do epoxy, the shrouds are already made and are very nice to have. One big difference.between this one and store bought though is the three bolts that twist into the grinders neck to hold the shroud from spinning around.
I was talking about this tool for my job a few hours ago cause I got one without the vacuum and it gets hella dusty fast and NOW this pops up in my RUclips 👀 they listening 👂
Oh brilliant, another piece of shit that I’m never going to make. Thank you.
OMDawg, lmao
PVC and PP 😂
Seriously
Lawllllll.
if you can't read, it clearly says diy, for people who like to build shit themselves. go cry about it Sam
Why did you melt the hole when you already had a unibit.
I’m guessing to offset it and make it sit lower
I dont take advise from people who grind plastic lol get a razor knife or metal saw.
@@inibrasiumthefirst2680 💯
For views.
@@inibrasiumthefirst2680 you’re one of them huh? Who cares I cut vinyl all day with a grinder. It’s faster and easier. Who cares?
The perfect combination of having lots of tools and not know how to use them.
Truth spoken.
You’re being trolled, my guy
100%%
All the gear, no idea
Great I’ll definitely use this next time I need to sand a concrete floor with an angle grinder
Good answer 🤣🤣🤣
Lmbo
Well, that’s actually totally a thing, but fuck this video
This actually might be handy if you did epoxy floors
You don't sand a floor with a angle grinder. But you grind edges, in the industrial sense of epoxy over lays, with a 7" hand grinder with a shroud that that is made for the application. I used them for seven years, we also polish concrete with them as well. 12 seg diamond cups or 24 seg diamond cups. But for the big parts of the floor we used diamatic 780 pro. A planetary grinder. This dust shroud would never be used in cutting metal because fire still happens in a vacuum and the filters are flamable. But with concrete it is a MUST silica is dangerous and causes painful silicosis.
One of these days I’m going to make a video of me cutting and drilling and make absolutely nothing 😂
And im sure you gonna get thousands of views, likes and subscribers (no sarcasm)
Me: so how many techniques do you want to use in your video
Guy: yes.
I remember when videos like this turned out to be a bong. The good old RUclips.
In the days when you could attach your reply video to the guy's original video, then their viewers would see your work, too. I had another channel back in the day. I met the best people here.
"don't recommend this channel"
Good idea
Reasonable
i think they made the channel for useless stuff, "totally handy"......
ye
Oh thanks my dude, I forgot youtube had that option, and I was loosing my shit about this good for nothing channel reappearing in my feed
I hope the people that make these videos breath in deeply when they’re heating up the plastic to get the full effect of the toxic fumes.
How do you think they keep coming up with these ideas?
Maybe the people watching could learn to spell ;)
@@mrgolftennisviolin its the internet, nobody cares about what word was misspelled
Grow up
You should invest in a mirror haha
I bet you drink city water....
"Tanner,... moms pissed again bout you grinding the basement floors 😤 "
Ur moms when dat hole being reamed 👀
Dude that’s torture, don’t grind my basement floor..
*Not unless I’m in there too.* 😏
Uh oh.
@@Shitstainsteve busted
@@sebione3576 😆 fs
Now I can't see what I'm doing.
Awesome.
Is dust control. If he didn’t do that. It would dust out the room in seconds 🤣
Why would I spend money on that when I can buy a land mine my guy 😂
What’s the cost of this in lost time and materials, vs. the 6.95 it costs to buy one?😝
u could just have the right tools for the job and make this in 15 mins
@Enola Gay i would rather make my own in 15 mins than drive 2 hours to a hardware store or wait 3 weeks for it online
@@yoloboogie3674 If you live 2 hours from a hardware store I'm surprised you have the internet to comment on this video.
@@TheTenthLeper hardware stores do not exist in where i live
@@yoloboogie3674 Where on earth is that?
Стоп подожди, у тебя было ступенчатое сверло чтоб просверлить отверстие большего диаметра!? Но решил маленькое раздуплить отверткой
Там отвёртки специально что бы оно как чаша было он сделал
Специально так отвёрткой сделал что бы изогнутой формы был кожух
@@olegmorisov7726 Да а потом отрезал, и даже хамутом не закрипил, видно же что эта болда болтается, и если б не шланг от пылисоса она вращалась бы вместе с дискам
Зря стопоришь, там идеи как из разорвавшейся трубы канализации 🤣
@@masterplastik9698 поддерживаю, отъявленная хуита, если эта байда ещё и вдруг треснет от вибраций вообще прикол будет=)
I'm was thinking to myself "this is gonna be something stupid" and I was right.
Maybe just buy this part it looks like it’s gonna be much more easier 🤣😂🤣
This man surely knows how to widen the hole 🙂
Lol. I laughing so hard at your comment still after 10 mins. Funniest comment ever.
I thought the guy who phucks everything would show up 😐
Good idea, though you lose being able to see what you are grinding. You could put an acrylic window or something to remedy that.
Easy just use a clear plastic
@General Pershing what are you talking about??? That orange plastic is only orange cause they mix in orange pigment... The pigment has no structural benefits what so ever.
Generally though plastic like what is used in plumbing , is colour coded so it will be easy to tell apart from other things , for example when a pipe is dug up from the ground.
At least that is a practice in Europe , no clue about the us.
@@TheBurnknight my science degree expired last week but I think he means that clear "plastic" is usually acrylic which is hard and brittle. While the orange thing pictures here looks like PVC. I've personally never seen clear PVC.
I suspect it's an unavoidable tradeoff to be "clear" it must be hard/brittle so that it doesn't scratch and become opaque.
@@bobcougar77 PP (polypropylene) is pretty flexible and transparent at the same time (Same as polyethylene used to make water bottles, but i agree it's gonna be scratched easily, although there is one type of plastic that is not brittle and transparent at the same time - tritan, they use it in blenders sometimes)
@General Pershing …What an unbelievably over-broad and completely incorrect statement.
"No More Dust!"
Also ... "No More Being Able To See Your Work Area!"
Man cuts EVERYTHING with a grinder!! 🤘🏻
Вот это логика😅😅😅, в начале просверлил маленькое отверстие, затем нагрел, просунул трубу, а в конце просверлил такое же отверстие за секунду 🤪🤪🤪🤪
Mom: The gynecologist will just look!
Gynecologist:
Ahh yes making a attachment for a shop vac that usually comes packaged with this attchment
The sell those at Home Depot right next to the grinder blades.
When he pushed the screwdriver through, my girlfriend felt that
So he made a plastic guard for his grinder the vacuum can hook 2 to catch dust, nice.
Congratulate Gary everyone he possess the power of 2 human eyes
I know the guy that patented this tech
@@cfisher407 thats pretty cool
At first I thought it was a landmine, a great piece of equipment for the workshop I don't have.
Isso é genial, obrigado pelo ensinamento
"DIY"
First: buy $15,000 worth of tools.
Pretty basic tools to me
@@__.-.__hi865 Basic sure, but for more than a few thousand dollars. If you go cheap on MOST of these you put yourself in Danger or just won't get the job done.
I mean. take a few months to earn and aquire, and then have a good garage! But if you're on a real job, the best tools cost more than a middle-class car.
😀👍
The hand grinder the single most useful tool I own. Use it more then a drill.
Опять одни иностранцы , некого нахуй послать шучу .
That crowning brought back memories of watching my baby's head crowning.
Me: *pulls out mini vacuum cleaner*
When that blue screedriver handle went through the hole though. 😆😂
Ace Ventura popping out of the rhino...
Better to make a small opening in the rubber seal. If the seal is closed, you can shut down the vacuum, no dust will be removed.
Nope. He has small slits along that rubber edged he put in.
If Dysons watching, he's shaking his head
A shroud for your grinder is probably the last thing I would hand make. Buy one for 60$ and have it for a lifetime if you use it on small projects. I use one everyday for work and haven’t had to change one out yet
I need my 1 minute back!
Doctor: congratulations maam, its a philips screw driver with magnetic tip
I don't understand all the hate people have in these comments for this video. It's pretty well put together. And the idea obviously works. It might not be needed for everyone but there is definitely someone out there who needs something like this I guarantee it.
Cutting plastic with a grinder is sketchy unless you know what disc to use.
The plastic melts...sets and grabs the disc - it can shatter a disc.
Dont make any modify to that tool trust me
And when the world needed FunkFPV the most, he vanished
Great idea, just thinking the other day I need to get a safety guard for my angle grinder thanks
Looks like youre gonna need every tool in the universe to make this DIY tool
it's my first time, be gentle
you:
250 Полуляхов
Да ладно! Мне кажется всего 120
Он это видео оценил бы
Думаю тянет на 200
10005000))))
Тут мегаполуляхихи тащить надо
Sick now I can’t see where I’m grinding that’s legit
What you trying to look at. ?? He’s grinding the concrete smooth.
@@DustinOllila trying to see what I’m grinding damnit
@@sk8nchill52 don’t need to. If you keep it moving your fine. I cup grind floors all the time.
@@DustinOllila that’s sick
you could save yourself time and just avoid the second hole.
If you put that collar on an angle grinder, I guarantee you won't have any dust to worry about.
청소기 하나 사라~ 사!
You can't see your work. Maybe if it were clear.
And why did you go through the trouble of melting the hole if you have a step drill?
I use floor grinders like this all the time. What are you trying to look at. All your doing is grinding the floor smooth. Lol
*Now you successfully made an item that is standard in the box*
Who el$e didn’t care about his craft but stayed for the drill beat😈
Or just buy the part…
$35 at home depot .. $30 on amazing just buy it !
That’s way lamer than building your own though
I’ll never get those moments of my life back
Nice beat bro
Never ever remove a safety guard on an angle grinder. Are you for fucking real?
I learned that the hard way. Got cut, luckily not bad but it still doesn't pay to be lazy when it comes to safety & repair jobs.
Yeah... All of mine have been removed. Used them for years and years. You just stay out of line with whatever disk and you'll be fine. Wear gloves, sleeves, glasses and a face shield you'll be just fine.
@@jibblesq good luck to you. I prefer to stay safe. Theres a proper tool for every job out there. It's just that this is ... Well unsafe. I've took a few hits with a lot of those discs and know to never tamper with what little protection there is on an already lethal system.
I prefer having the guard on but every now and them you have to take the guard off to get the grinder positioned properly
That disk he put on will never explode. It’s impossible. He basically convert it to a cup grinder. And it’s for dust control that’s it.
I’m a millwright I’m going to build this and see what kind of reactions I get from the safety boss
Awesome. I've made three and they really work.
This is like satire of actually witty and useful hacks.
Как много вопросов... Как мало ответов.... И только один вопрос - на хуя такие заморочки - если есть в продаже готовое?
Готовое стоит 2-3к и больше, это выходит на 300р. На маленький объем или на пару раз готовый кожух нахрен покупать
Should have started with a much bigger hole: at least 2/3 of final diameter, if not 3/4...
Stooge move.
This is the dopest video of 2022 🔥💪
Ahhh the defacement legtakeawayer fly around the shop like a airhockey puck tool nice!!!!
저렇게 만드려면 투명케이스로 만들어야지 .. 뭐가 보여야 작업을 하지..
Depends on the project
Жить долго вашему пылесосу желаю 🤣
I will certainly use this if I ever want to inhale melting plastic and feel like grinding my sidewalk for 12 hours
Man I really need a seeker even in the shorts.. Lol 😂🤣
JUST BUY A FUCKING SHOPVAC
Вы тоже почувствовали эту вонь?
Я чувствую эту моральную боль при использование этого говноприблуды.
Nicely done.. A+ on creative thinking...
Never mind me going out to buy 30 power tools to make a vaccum cleaner
The most disgusting and smelly build ever with burnt plastic everywhere
This is done by professionals 😂
재능 낭비 장비 자랑
RUclips didn't even offer to translate that.
At this point I watch this channel as a meme experience 🤣 kinda reminds me of 5 minute crafts
Grandma: so that’s where my tortilla warmer went
Thought he was making a home made fleshlight 😂
I was waiting for the welder to come out
How to use 4 wrong tools the wrong way 4 times in 30 seconds
어렵게 산다.
내 말이요..
Plenty of companies make shrouds for grinders
I love these types of videos. Awesome.....
Netflix: "are you still watching?"
Some guys daughter:
Need whole workshop to make the tool wow
Might actually be good for someone panning to grind their concrete floor and do epoxy, the shrouds are already made and are very nice to have. One big difference.between this one and store bought though is the three bolts that twist into the grinders neck to hold the shroud from spinning around.
Thank you for this thing I'm never going to make
Melts the first hole out using a screwdriver and angle grinder. Uses a hole saw on second.
I was talking about this tool for my job a few hours ago cause I got one without the vacuum and it gets hella dusty fast and NOW this pops up in my RUclips 👀 they listening 👂
Boss, I have hidden the cutting disc under the plastic. Now I cant see what I am doing!
Bet we all stayed for the beat and nothing else😂
He was definitely making that up as he went
There 1 minute of my life I will never get back thanks
Damn, I thought this was where you put the tortillas at first
This attachment COMES with many vacuums. Why would I waste my time recreating one? 😂
Maybe his vacuum was a used one
If that's going to improve my workshop, I don't have much of a workshop.
I'd get more use putting them parts in a recycling bin!
Micro plastics yum!!!
Fun fact, one that actually works is available on Amazon for like $6
If you make something for safety, whether you wasted time, it still "ok"
Only safety he made was dust control what looks like it worked perfect.
The only thing that will improve is my lack of confidence.