i will try to built a LC80 axle with diff lock not put a complete portal axle from FMS K5 to test and try to make original FCX10 LC80 gear box with FF and Dig. Because 40mm from Diff bottom to ground is enough at 1/10 scale.
This FMS FCX10 1/10 scale Hi performance ready to run Toyota Landcruiser LC80 STD Crawler model with 2 speed gear box and heavy duty axle, adjusable suspension and realistic LC80 body and TJM bull bar, side step, Roof Rack, spot light and ladder, 36 inch over size super swamper MT tire and working light system at very low price, U turn need 1.5 meter, you can buy optional portal diff ( can 100% locking ) for front and rear axle. Than U turn need just 1.4 meter. or use a K5 gear box use FF and open diff to U turn at just 1 meter. original RC CH3 and CH6 you can put 2 servo or 3 servo.
So this doesnt have diff lock? I prefer this but if doesnt have diff lock i might go for the FMS k5 Blazer. But this one looks way better dont know what to do!!!
@@ricardopires4713 it is a STD model, front and rear portal axle always locked. very good for every day off road.K5 can unlocked when on road and use FF on road. or you can order K5 axle for this LC80 like my one. ruclips.net/video/5w2xoJjK-58/видео.html
@@ricardopires4713 This is just a STD model, price lower than K5 a lot, the portal axle always locked for you every day off road, but you still can put K5 axle on this LC80 like my one. ruclips.net/video/5w2xoJjK-58/видео.html ruclips.net/video/L8kw_wshPso/видео.html
@@ricardopires4713 yes i like Rc model with diff, but off road, you need locked diff, so i like to put K5 axle, but if you just use it for off road, than no need diff.
This is a STD model, not DLX and price very low for some one want off road.But still got heavy duty axle and adjusable suspension and 2 speed gear box ,TJM bull bar, roof rack, ladder and sport light and working light system. The DLX model will have 2 portal axle and diff lock , FF, 4WD Hi and 4WD low range, and Dig funcition too. if you just want FF, Dig gear box, than you can order from FMS and need one more metal gear servo too.
i will try to built a LC80 axle with diff lock not put a complete portal axle from FMS K5 to test and try to make original FCX10 LC80 gear box with FF and Dig. Because 40mm from Diff bottom to ground is enough at 1/10 scale.
I can’t wait to see FMS unleash the iconic Camel Trophy Defender in 1/10 scale! This would be such an exciting addition for enthusiasts!
at 1/10 scale? 110? Discovery 1 and classis Range Rover ?
Another FMS masterpiece!
Do you have a FCX10 K5? ruclips.net/video/VnR2xM8kX58/видео.html
ruclips.net/video/tWRoPVorRMQ/видео.html
This FMS FCX10 1/10 scale Hi performance ready to run Toyota Landcruiser LC80 STD Crawler model with 2 speed gear box and heavy duty axle, adjusable suspension and realistic LC80 body and TJM bull bar, side step, Roof Rack, spot light and ladder, 36 inch over size super swamper MT tire and working light system at very low price, U turn need 1.5 meter, you can buy optional portal diff ( can 100% locking ) for front and rear axle. Than U turn need just 1.4 meter. or use a K5 gear box use FF and open diff to U turn at just 1 meter.
original RC CH3 and CH6 you can put 2 servo or 3 servo.
So this doesnt have diff lock? I prefer this but if doesnt have diff lock i might go for the FMS k5 Blazer. But this one looks way better dont know what to do!!!
@@ricardopires4713 it is a STD model, front and rear portal axle always locked. very good for every day off road.K5 can unlocked when on road and use FF on road.
or you can order K5 axle for this LC80 like my one. ruclips.net/video/5w2xoJjK-58/видео.html
@@ricardopires4713 This is just a STD model, price lower than K5 a lot, the portal axle always locked for you every day off road, but you still can put K5 axle on this LC80 like my one.
ruclips.net/video/5w2xoJjK-58/видео.html
ruclips.net/video/L8kw_wshPso/видео.html
@@victorma1141 So the upgrade is jsut to turn off the diff lock right? With diff lock turn off the car turn better right? Thanks in advance.
@@ricardopires4713 yes i like Rc model with diff, but off road, you need locked diff, so i like to put K5 axle, but if you just use it for off road, than no need diff.
How to contact you to get the early release hahaha
I pre order my one cant wait…
This STD model still with 2 speed and nice suspension and a realistic body with all accessories just USD300.
Can you put the selectable 2wd to 4wd feature on this model like the k5?
This is a STD model, not DLX and price very low for some one want off road.But still got heavy duty axle and adjusable suspension and 2 speed gear box ,TJM bull bar, roof rack, ladder and sport light and working light system.
The DLX model will have 2 portal axle and diff lock , FF, 4WD Hi and 4WD low range, and Dig funcition too.
if you just want FF, Dig gear box, than you can order from FMS and need one more metal gear servo too.
ruclips.net/video/tWRoPVorRMQ/видео.html
ruclips.net/video/L8kw_wshPso/видео.html
this one with all of them. ruclips.net/video/L8kw_wshPso/видео.html
我想問你邊度買
go to our F B
1/12 most realistic FMS RTR RC jimny with tractor mud tire test at garden by Dante ruclips.net/video/7OLn3-e6UE4/видео.html
Sir how to connect with you
go to our Shatin Fo Tan office.
go to our F B
I can’t wait to see FMS unleash the iconic Camel Trophy Defender in 1/10 scale! This would be such an exciting addition for enthusiasts!
every thing is possible.Do you have FCX10 K5? very good 4x4.