How to Super Flatten Arkansas stones
HTML-код
- Опубликовано: 27 авг 2024
- In this video I will show you how you can get your Arkansas stones super flat using opticians' technique for flattening telescope mirrors, I hope this will help you take your sharpening to the next level.
Here is the link for the stones I am using in this video "Beware they don't come flat enough out of the box": amzn.to/3yFiQ7B
#Sharpening
#Woodworking
I have a black Arkansas stone that needs to be flattened. Good information.
The good news is you need to flatten it once and some touching from time to time should be enough, thank you for watching 🤝
Se ve muy buena la sugerencia.es posible pasarla en español.saludos y muchos éxitos y gracias.
gracias, lamentablemente no hablo español, puede preguntarme en el comentario si tiene preguntas y haré todo lo posible para responder sus preguntas.
wonderful...mygreathanks and blessings
Wow thx for sharing this !! It brings us back to essentials NATURAL STONES !!!! And you’ve made me learn and to go to bed to knight less stupid 😂😜👍🏼❤️🇨🇦
Thank you for watching, glad you find this useful :)
Wow! That is so insightful. Thank you for adapting this technique to our hobby. Great video!
Thank you for your comment, happy to read that.
Always wondered how this was done. Thanks for another great video.
❤️🤝
Muy buena la explicación del rectificado de las piedras de amoblados de herramientas.saludos éxitos y gracias.
Was gonna run mine through the thickness planer really quick
Try that and let me know how flat it will come out :)
Flatten your stones and sharpen your thicknesser knives at the same time!
I just use a glass plate and sandpaper to get it really close...then finish with diamond plates. This gets them flat enough that a steel straight edge can't tell the difference...which is good enough for my use.
👌
Can water be used on them for sharpening instead of oil???
On these stones Oil is better, it prevents clogging them with debris, using water will speed up clogging and affects the honing process
I can paste Fritz? If yes lije I will use to polish Atkansas?
Can i put an abrasive paste on the stone and passvover a flattening stone? It shoul be equivalent to what you did in the video but more simple🎉
Try it out, but make it as thin as you can it should work. By the way this technique can give you acceptable flatness but not an optical flatness! Good luck.
Are you using water or oil when you hone with these stones? Could you use oil rather than water in the flattening process?
Oil is thicker and slippery for flattening yet difficult to clean! I use mineral oil for honing only.
I have an old 3.5" by 11.5" and 1.25" thick blue/black stone that is both dished and scarred/gouged fairly bad on all surfaces. Any recommendations on where to begin? I thought about starting with a surface grinder with a masonry attachment, but backed away from the idea when I learned that it can be knapped like flint. I'm now worried I'll chunk a large piece off doing it with power equipment. Any help is appreciated in restoring this old barn find, I really want to use it!
forget about it, just buy a shapton.
👍👍👍
where do you get the grit in large containers like that?
Try amateur telescope making sites they sell almost all sizes
I do respect the skill and craftsmanship shown in this video. But from a practical perspective, this is a bit of an overkill. Once you put the stone to use, it loses the super fine finish you spent hours to reach. But all respect to the know how and the effort.
The law of diminishing returns...
Wouldn't a diamond plate be faster? I know they are expensive, but they last forever.
I have them but I don’t won’t to wear them down so quickly, this is another method that I was experimenting with and it gives a decent results. Of course you can use diamond stones if you like.
Thanks for this. Small note, Arkansas is pronounced AR-kin-saw. For no particular reason I know of.
🙂👍 This is the French pronunciation when they first discovered Arkansas, but the British was pronouncing it the way I did, however now it is illegal in Arkansas to use the British pronunciation 🤔
Hi,
unfortunately the described method with only linear strokes will not work and will not produce flat surfaces. You must include some sort of rotation. Check this video to understand the details behind this error: ruclips.net/video/Va4TGDnQqDs/видео.html
I used the same method years ago in order to get flat stones made of bricks. It kind of worked, but small deviations remained. This is caused by the fact that without a rotation you could and actually always will get a saddle surface instead.
Probably it will be flat enough for your purposes, but at the end it will not be dead flat.
Thank you for your comment, I used this method back in a days when I was making a telescope, it is used on a round mirrors hence it allows for rotating after a random number of strokes, this method can produce 1/12 of a wavelength flat surface which is flat enough for optical system and of course not required on a sharpening stone, if you maintain slight random side to side offsets as I did in this video you should be able to get a good flat that is enough for sharpening and even more than enough, not sure if you tried this before and if so I will be surprised if you didn’t get a good flat out of this method.
@@TheWoodCrafter1 Thanks for the reply. Yes, I used this method myself years ago in order to flatten 3 bricks (lengh/width ratio 1:2) which in a second step were used to flatten water sharpening stones.
Measuring the diagonals on the bricks with a good straight edge it became clear, the stones are not dead flat, it was a saddle surface. A very small deviation but definitely measureable.
I tweaked my method and added strokes in the diagonal directions in order to minimize the deviation, but I never got the bricks as flat as I wanted to.
Regarding the theory behind it is absolutely clear that the method will only work (which means as flat as you want) correctly with round pieces or stones, not on long stones which will not allow strokes in any directions.
@@carstengriewatsch4624 Thank you for sharing your experience, you are right this method was used to flatten round objects, specifically for optics, I have tried other methods that I have access to, to flatten these stones but never get them as flat as I wanted, as I do have previous experience in making optics, I did manage to flatten these stones using the 3-plate method to a satisfying level for the job they will be used for and I measured them diagonally on both ends and they were very good! maybe because they are only 2 inches wide and I was using some circular strokes from time to time in addition to offsetting them slightly.
I've watched your video already and yes you have a good valid point there, however if I need to make a reference flat then this method won’t be the way to go, but for sharpening woodworking tools and no access to flattening plate or similar machinist tool, the method I have used produced the best flat I could achieve on these stones compared with other methods that I have access to.
I know that metal scrapping is the best way to flatten metal flats, but as you know it can’t be applied on sharpening stones.
It still get's it flatter than a diamond plate :D
@@carstengriewatsch4624 Three stone method is industrial standard for creating flat surfaces. If you do it right precision is absurd. If it didn't work something went wrong.
I think it's great to know we have access to industry standard flattening process without any fancy equipment but for me it's overkill.
For knife sharpening as long as a stone is flat enough that no light passes under a ruler it's good enough to make an edge that cuts paper towel.
Hair whittling is a good challenge but not very practical since the blade doesn't hold the edge.