hi charles bang.. i have A4VSO 260 DFE1Z.. The problem is the pump sometime give the pressure. sometime not. the worse part is the angle valve open around 50% but still not pressure. Also the speed card VT5031 always showing error. any advise???
You are using an electro-hydraulic control type pump. If you can check the sensor and output signal then it might be helpful to figure it out. If the feedback signal is not proper then the output signal will not work fine.
@@charlesbang we have bought A4VSO40DR/10R-PPB13N00. On th le catalog it is mentioned that the pressure can be controlled between 20 to 350 bar. But is there any video in which it is explained the complete procedure to do it
احسنتم فديو تعليمي رائع و جيد جدا
بالنسبة لهاذا النظام هو نظام تحكم كهربائي
نريد شرح أيضا عن النظام الميكانيكي
I don't have mechanical control type of A4VG data.
hi charles bang.. i have A4VSO 260 DFE1Z..
The problem is the pump sometime give the pressure. sometime not.
the worse part is the angle valve open around 50% but still not pressure.
Also the speed card VT5031 always showing error.
any advise???
PIlot pressure around 50-60 bar.
@@liyanahaziqah4130Can you let me know the whole of the hydraulic circuit diagram?
@@liyanahaziqah4130 Please watch this video.
It may be helpful to you.
ruclips.net/video/xpmFAtbFgI8/видео.html
You are using an electro-hydraulic control type pump.
If you can check the sensor and output signal then it might be helpful to figure it out.
If the feedback signal is not proper then the output signal will not work fine.
Are the new and old control modules interchangeable?
I think so.
Hallo, can you tell me how to change the direction of axis rotation from counter-clockwise to clockwise?
I can send you the maintenance manual and part list.
Please let me know your e-mail address.
Hello Charles we have bought A4VSO40DR Pump. It is with adjustable pressure/ flow. But don't know how to do it. Can you please guide me with that?
What pump have you bought exactly?
A4VSO40 DR is working like an on/off function.
DFR can compensate for the flow of load-sensing.
I recommend the video below.
ruclips.net/video/HCszWJhe3MY/видео.html
@@charlesbang we have bought A4VSO40DR/10R-PPB13N00. On th le catalog it is mentioned that the pressure can be controlled between 20 to 350 bar. But is there any video in which it is explained the complete procedure to do it
@@waseemij If you let me know your email address then I will send you the setting manual.
Hello. Charles waiting for the setting manual :)
Please where I can bet this HD control ex stock for A4VG90 pump
Do you mean where you can get this HD device?
Do you use Facebook ?
Yes I do.
@@charlesbang what is your'nickname
@@charlesbang where are you from m
@@thuanguyenvan1237 Why are you asking me for my personal information?
@@thuanguyenvan1237 I don't have a nickname.