Great video! It was really neat to see your lift comparison. I think you should look into a buwizz 3.0. They are lighter and produce more power than the mould king. They are a bit pricey but I love mine! I think a plane or helicopter design has potential with the proper setup!
Try using a technic turntable to mount the rotor blades if you try to make anything airborne. You'd probably increase the stability of the blades as well as incorporate means to control the blades, leading to the basis of a functional flying craft
@@LucasDynamics you can do that or you can find a way to attach the rotors directly to the turntable, using some gears to get power to the whole thing. May be tricky with the geometry of the turntables but the stability you'd get is probably crucial to actually getting an entire structure to fly
Any progress in creating a flying lego machine yet? Are you trying to build a plane or a drone and what are the engineering challenges you need to solve in order to get this airborne? Definitely looking forward to the next video regarding this topic!
It's quite difficult... Building a drone would be only possible using non original battery's or something like a Buwizz I think... I am currently trying to build a plane...
@@LucasDynamics Drones also require a flight controller with a gyro and accelerometer to be stable, another thing that would need tuning. Not impossible, just difficult.
@@LucasDynamics I think you are good and it's working for RUclips algorithm. So stick with this format. Maybe I can share your videos and you share mine on our channels to reach a wider audience.
just a suggestion to use stiffer structure for holding the axle. i guess you get some significant friction on the link above the gears, and also resonance due to the long free standing axle.
ive always tried to build somthing that flies from lego. I have spare propellers from my drone and have tried a couple times to use those but the lego motors just dont spin fast enough
The wind is blowing on the battery box solution. Put the battery boxes underneath on so that the wind close on the ground. Not the battery boxes otherwise it's working against itself
Thanks, I am wondering how do you record your audio in your videos so clear... Is it the original sound recorded with a good microphone, or do you use stock audios?
Weird fact: This is a Chinese buggy motor, cuz it has PF connector built-in, and original buggy motor has 2X2 stud 9v connection, perfect for NXT/EV3/BWizz X.0
Dude, it doesn't matter what he propellers themselves weigh. When you tested for the lift, they were ALSO LIFTING THEMSELVES; ergo, the lift was just that much greater. It's not like the lift wasn't able to overcome the weight of the propeller itself.
Short Answer: It lets you spin the propeller faster Longer Answer: Much harder to show without a physical or even visual representation, but imagine two gears connected to each other, one with eight teeth and one with four teeth. Every time the gear with eight teeth is spun around 1/8 of a complete turn, the next tooth makes contact with the 4 tooth gear, and pushes it forward, moving it to the next tooth. Eventually, once the 8 tooth gear has turned 1/2 of a complete turn, the 4 tooth gear will be back to its first tooth. Every time you rotate the 8 tooth gear all the way around once, the 4 tooth gear rotates all the way around twice. With different numbers of teeth, the gears will turn at different speeds. A gear ratio refers to the ratio of teeth between the gears, in this example, the ratio is 1:2, two teeth on the eight tooth gear for every one tooth on the four tooth gear, meaning the four tooth gear will spin twice as fast as the eight tooth gear. So instead of connecting the motor directly to the propellers, you can connect the motor to a large gear, have it spin a smaller gear, then have that smaller gear spin the propellers much faster.
next test would be the pitch and prop design...or even consider the Toroidal Propeller.... just a thought,.. I build and fly quads.. latest was a 5" hyperlite called the Tooth Fairy.. does around 112mph and in FPV is a blast..!!
I think too fast speed resulted to stall at the end of blade, 2 main parameters effect to lift force are rpm and angle of attack. Anyway, love your experiment.
The 6-blade one does win. It lifts 7 grams more, but the 0 grams is measured with the added weight of the propeller. So the number you thought you wanted to measure actually says this propeller can lift 22 grams more, but weighs 15 more.
Nah, I don't know what you exactly mean bro, but it isn't right... It's very simple, by using the scale I ONLY measure the weight it could lift... But if I want to implement it into a drone, the weight of the propeller also counts because it isn't on the scale anymore...
When you add new pieces, you can not get accurate results between the first and second prototypes because the change in weight affecting the overall limit.
Do you think an airplane would fly with these?
Great video! It was really neat to see your lift comparison. I think you should look into a buwizz 3.0. They are lighter and produce more power than the mould king. They are a bit pricey but I love mine! I think a plane or helicopter design has potential with the proper setup!
In Theorie yes
@@madeforappinstalls Yeah, I already built a glider with paper wings, it's a little bit cheat, but a big baseplate is quite heavy...
@@jareddeckard2703 I will try to get one! It's also a little bit cheat, but it might be the only way to get it airborne...
Try use coaxial proppeler
Try using a technic turntable to mount the rotor blades if you try to make anything airborne. You'd probably increase the stability of the blades as well as incorporate means to control the blades, leading to the basis of a functional flying craft
You mean I should install a turntable under the whole thing to achieve a better stability?
Yeah
Yes
@@LucasDynamics you can do that or you can find a way to attach the rotors directly to the turntable, using some gears to get power to the whole thing. May be tricky with the geometry of the turntables but the stability you'd get is probably crucial to actually getting an entire structure to fly
@@neetard7360 The Lego turntables have a fair bit of friction though.
He wasn't even waring a helmet 🥲
I know 😅
Bro💀
@@lego-constructions XD
Rip Lego Minifigure💀💀
😔
0:45 1:05 1:27 1:30 1:53 2:19 and the rest almost broke the sound barrier
Any progress in creating a flying lego machine yet? Are you trying to build a plane or a drone and what are the engineering challenges you need to solve in order to get this airborne? Definitely looking forward to the next video regarding this topic!
It's quite difficult...
Building a drone would be only possible using non original battery's or something like a Buwizz I think... I am currently trying to build a plane...
@@LucasDynamics Drones also require a flight controller with a gyro and accelerometer to be stable, another thing that would need tuning. Not impossible, just difficult.
*No minifigures were harmed in the making of this video*
Exactly🥲
alternate title breaking the sound barrier with lego
@@LucasDynamicshi
@@dark_places Hi
@@LucasDynamics I've been notified that some ILLIGAL helicopters have been tested by an ILLIGAL pilot WHITOUT safety equipment is that true?
Very cool video my friend ❤️, hope this will get millions of views 😍
Thanks, we'll see if the algorithm picks it up...
@@LucasDynamics I hope so ❤️, don't forget me when you become a RUclips star 😂✌️
@@Bricks.Master.Builders😂 When I become a RUclips star?😅
You have still like 34 times more subs than I...
You will become a play button soon 🎉🥳
Awesome video! Nice work on the editing!
Thank you! Nice to hear from such a Lego legend!
2 Weeks later . Almost 50k views 😍
Congratulations 🎊🎉
Yeah, thank you!
Any suggestions how I can improve my videos, thumbnails and titles? 😏
@@LucasDynamics I think you achieved what i couldn't achieve 😂 I'm the one who needs advice 😁
@@LucasDynamics I think you are good and it's working for RUclips algorithm. So stick with this format. Maybe I can share your videos and you share mine on our channels to reach a wider audience.
Ok, maybe in the long form videos, but your shorts are getting a lot of attention...
@@LucasDynamics yes 👍🏻
i wish you tried a counter-rotating propellers setup too. good video regardless
How would that work???
That would be extremely difficult with Lego...😅
just a suggestion to use stiffer structure for holding the axle. i guess you get some significant friction on the link above the gears, and also resonance due to the long free standing axle.
Yeah it's quite problematic...
ive always tried to build somthing that flies from lego. I have spare propellers from my drone and have tried a couple times to use those but the lego motors just dont spin fast enough
Yeah, you need a buggy motor, they are way more powerful then all the others...
@@LucasDynamics Yeah i was using a buggy motor with buwizz at ludicrous + gear ratio
Ok than you need a gear ratio and some better blades...
The originals are very good and efficient, but are quite expensive.
@@LucasDynamics blades arent the issue, they are proper drone blades that work on my actual drone
try adding 4 of those propellors and having 4 arms to hold the propellers like a drone
You mean with four motors, or a central one?
@@LucasDynamics i ment 4 motors but you could try 1. Maybe do both for a video? I'd watch it
@@Sparkfilm-yy8ye I have something similar planned...
@@LucasDynamics yay
@@drafffic Yeah, I will try both...
6:46 bro the lego person starts a bailarine dance
💀
3:46 blades: i gonna disconnect from that motor
You deserve it like because your comment it’s almost like my comment where I get zero likes actually
No.
Try 5-bladed propeller/rotor like big helicopters use. It should be slightly quieter as well.
The fact u made it w lego is just amazing 😮
Can you please write another link for the propellers
You can't buy them new, you have to buy them used...
ok and where@@LucasDynamics
The wind is blowing on the battery box solution. Put the battery boxes underneath on so that the wind close on the ground. Not the battery boxes otherwise it's working against itself
The propellors need to be in proportion to the body, especially in length.
5:53 That propeller flies.
Wieviel Zeit war in dem Video
Vorbereitung: 2-3 Stunden
Filmen: 3-4
Schneiden: 3-4 Stunden
= ungefähr 10 Stunden
@@LucasDynamics Krass 👍
Bei dem nächsten bin ich jetzt schon bei 20 und es ist immer noch nicht fertig...
Aeroplane next, please!
I will try it!
But it's going to be difficult!
A drone motor maybe?@@LucasDynamics
@@picknikbasket Nah, it needs more torque...
@@LucasDynamics yeah true, good luck with it, I'm not sure Lego motors will be up to it but you're on to something. Keep trying!
@@picknikbasket I will!
Could u make the buzzwmotor powered by 2 battery but not 1, it cant handle 1/1.66 or even 1/3 cuz of friction and wings load
Have you answered the question of the caption in the first second?
Yeah, basically...
Great experiments, I'm curious about the topic of the next experiment
Thanks, I am wondering how do you record your audio in your videos so clear... Is it the original sound recorded with a good microphone, or do you use stock audios?
I think combining both will make the video even better@@LucasDynamics
@@woaminibricks Ok👌, thanks!
Cool video!
This was truly dangerous!
Yeah it was!
Don't try this at home!
I’m going to try it at home now😊
@@That1annoyingBee Cool!😮💨
Nice! Well done!
Thank you!
I like the two blade one!
Yeah, it's cool👍
More old-school...
1914: In 2024 we will have flying cars!
2024: Lego airlines
I suggest you build a Lego airplane and try to make it fly with those propellers 😊
@LucasDynamiics 😊
i love lego videos like these:) always satisfying clicks
Ohh did you not wear a helmet safety first
Weird fact: This is a Chinese buggy motor, cuz it has PF connector built-in, and original buggy motor has 2X2 stud 9v connection, perfect for NXT/EV3/BWizz X.0
Yeah, it's a mould king buggy motor with the power functions connector...
Btw try this with even faster BWizz motor
@@Nintendo3D5 I will definitely try it!
Nice video keep going!
Thanks man!
Where do I buy dose at? I want to make a flying machine out of Lego.
Nice video !!
Thanks mate!
Dude, it doesn't matter what he propellers themselves weigh. When you tested for the lift, they were ALSO LIFTING THEMSELVES; ergo, the lift was just that much greater. It's not like the lift wasn't able to overcome the weight of the propeller itself.
Create a smaller tecnic shaft for the propeller mount to lower center of gravity with less vibration. It saves lots of energy
What it the another battery box for?
Just to add weight...
I was concerned that it might take off...
Bro at the last the leg man oldie literally went like wiiiiiiiiiiii
hey what battery hub and controller did you use in this vid
where you get the fast lego set
Bro broke the sound barrier 0:43
Maybe try using technic blades for example the ones on the lego ornithopter or lego set number 42145
l love those videos like this ones l love them so muchhhh
Where can i but lego technic
Bricklink
Markrober when he trys Lego:
😎
Lego constant-speed prop possible?
Hi i really love your videos❤
I mean, take a look at the ATR 71 or the Q400-8
I have a question? What are the purposes of gear ratio?
Short Answer: It lets you spin the propeller faster
Longer Answer:
Much harder to show without a physical or even visual representation, but imagine two gears connected to each other, one with eight teeth and one with four teeth. Every time the gear with eight teeth is spun around 1/8 of a complete turn, the next tooth makes contact with the 4 tooth gear, and pushes it forward, moving it to the next tooth. Eventually, once the 8 tooth gear has turned 1/2 of a complete turn, the 4 tooth gear will be back to its first tooth. Every time you rotate the 8 tooth gear all the way around once, the 4 tooth gear rotates all the way around twice. With different numbers of teeth, the gears will turn at different speeds. A gear ratio refers to the ratio of teeth between the gears, in this example, the ratio is 1:2, two teeth on the eight tooth gear for every one tooth on the four tooth gear, meaning the four tooth gear will spin twice as fast as the eight tooth gear. So instead of connecting the motor directly to the propellers, you can connect the motor to a large gear, have it spin a smaller gear, then have that smaller gear spin the propellers much faster.
next test would be the pitch and prop design...or even consider the Toroidal Propeller.... just a thought,.. I build and fly quads.. latest was a 5" hyperlite called the Tooth Fairy.. does around 112mph and in FPV is a blast..!!
Where do you buy that controler for lego
He bulit it
Wow how can you bend your thumbs like that?
Bro wants to fly an aeroplane with this 😂
@LucasDynamiccs omg
😸looked like fred dropped 10 feet when the propeller landed, you sure no minifigures got hurt?
I think too fast speed resulted to stall at the end of blade, 2 main parameters effect to lift force are rpm and angle of attack. Anyway, love your experiment.
It's very cool!
Thanks man!
I wonder what happend to the minifigure...
*No minifigure was hurt during the filming of this video!
We'll see in the next video if he survived...
@@LucasDynamics I wonder....
@@brickaversion I also hope he does!
@@LucasDynamics Mysterious...
Crazy how I can’t even build Lego technic car with a manual and he out here make fans amd autoclickers😅
0:43 bro hit a high note💀💀🤯🤯🤯🙏🙏🙏
From 6:35 onwards I could not stop laughing lmao. xD
If you make it float and add a rudder, you'll have one super fast Lego hovercraft!
You need to check rpm when you add ratio gear
Drat now I need to buy 3 propellers!
Sorry, they are kind of expensive...
Try using this as fireworks in the morning instead of night
me playing beyblades be like
Now make an airplane.
I will!
@@LucasDynamics How💀💀
@@damoncreates489 it can’t fly like a drone, but a plane doesn’t need that much power…
💀
R.I.P🥲
I am so sorry 🥲
Noooo whyyy?😢
He had to test it...
@@LucasDynamicsYou could have tested it!
🤔how?
sonic speed up sound effects 6:40
Yeah, the sound is crazy!
Rip Joe, one of the best Joe 😢
The air from the propellers is also getting pushed down on the scale, so it is actualy lifting more than the scale says
No, this makes no difference...
remember me as the guy who was here when u had 53.9k subz
The 6-blade one does win. It lifts 7 grams more, but the 0 grams is measured with the added weight of the propeller. So the number you thought you wanted to measure actually says this propeller can lift 22 grams more, but weighs 15 more.
Nah, I don't know what you exactly mean bro, but it isn't right...
It's very simple, by using the scale I ONLY measure the weight it could lift... But if I want to implement it into a drone, the weight of the propeller also counts because it isn't on the scale anymore...
Try to use more buggy motors
Nah, I am trying to get it flying...
That would be way to heavy...
bro is the GOD of lego
1:24 POV: my fan on high voltage
6:31 no Lego mini figs were harmed here
Warning: Lego Buggy Motors Are Dangerously Fast!
Yeah, I know 😅
Oh yeah, that is a important feature
1:53 whoa! It’s a fan
If you add gears, then it will be way faster like five gear automatic
opp sorry didn’t get too far into the video and I saw that you did add them
swordman rotates so rapidly
Why doesn’t spacex use Lego?
What camera and video editor did you make all your videos?
It depends, sometimes I use a Canon and sometimes my phone...
I am editing with DaVinci Resolve or mobile with CapCut...
POV me: mom can we buy a rc helicopter? Mom: we have on at home. The helicopter at home:
Do a 12 blade design no ratio
The sound on the six blade😂 1:1 6
Warning ⚠️ is this might be 10,000 speed
1:23 sounds like a jet
When you add new pieces, you can not get accurate results between the first and second prototypes because the change in weight affecting the overall limit.
Hi Im your New Subscriber
BRUH WAS BEATING MEAT
При повышающем передаточном числе 1 к 3, судя по звуку, мотору тупо не хватает мощности, он не раскручивается до своих рабочих/максимальных оборотов.
It flew in the first 5 seconds
Make a Lego helicopter or drone
I am trying to build an airplane
Violating the legos at the end bro 💀
Flying propeller 😮
Wow good
Thanks!
Me from Indonesia
You
make a rc helicopter pls *made with lego *you can use technic lego**