Sheet Metal is Fun! The Funnel Finale

Поделиться
HTML-код
  • Опубликовано: 20 янв 2025

Комментарии • 69

  • @louiedavis3138
    @louiedavis3138 Год назад +1

    I wished I had a trainer like you in 1984 when I started my vocation as a sheetmetal airman. The education was so specific to aviation. The lessons consisted of simulated aircraft structures. Such as a wing section spar, bulk heads , former , sriffeners. Flush and scab patches. All the general " Important ` sheetmetal knowledge I had to acquire on my own. I picked up 5he Pittsburgh Seam by a new recruit. Found out 2024 T3 aluminum would not form a Pittsburgh seam. I picked funnels from a navy blue jacket publication. The Air Force decided to combine some career fields and I picked up paint. As the aircraft industry moved to composite I went to tech school again. I wished I could get back in metal bending but I have health issues. So for now I am living my love for creativity in metalworking by proxy thanks to you. I absolutely love your teaching style . A true craftsman such as you are a valuable asset in our mixed up world. Please keep up the work

    • @kengodfrey1956
      @kengodfrey1956  Год назад +1

      I love hot rods and airplanes, and I can tell you have knowledge I would love to know. I am glad you found us. We must continue to learn, grow and challenge ourselves in as many ways as we possibly can. We are pleased that you found value in our lesson. Thank you for your time.

  • @absentmindedprofesor
    @absentmindedprofesor Год назад +1

    Please dont stop making videos. It's like I'm back in shop class. Its wonderful.

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      Thank you for your encouragement. We are having a great time. We are so glad you find value in our lessons. Thanks for spending time with us

  • @keithbohne3718
    @keithbohne3718 Год назад +3

    Ken, you are a very inspiring person and thank you for all you guys do

  • @Billytomtom18
    @Billytomtom18 Год назад +1

    Hey Ken, I was a licensed plumber in upstate NY for years. I had a nice shop but I had a good buddy who just made metal for himself and a select number of other people. He ran a small shop when I first met him around the early 1990's. Jeff would start making metal early like 4:30 am and be on whatever job site he was contracted for. Jeff was a big dude, like 6'5" or taller, he taught me some installations basics. For a few years I did A/C too, along with refrigeration. But being a small outfit I basically stuck with plumbing. I helped Jeff set-up his Plasma cutter years later, it was computer operated. There was almost 0 zero waste with those units, he both his 2 hand, of a shop that went out of business. You know the story, the 'oldman' passes aways and the kids don't won't the business and sell odd all its contents. Construction is something I love, but it takes it's toll on the body along with the home-life.
    Going out on 'no-heat calls' late at night, or replacing a Steam boiler for a small 4 family building in the middle of winter, well you know , you're stuck ill the heat is up and running, or pipes will freeze-up, a big mess.
    Anyways I always learning new stuff, I have the basic sheetmetal tools, an electric nibbler, L,R. and Straight cutters, a few different size benders, a hand pop-rivet tool, like I say the basis.
    Ken a trick I'd learned was using some of the open mesh shelf liner on a flat surface, keeps things from sliding, like that piece of metal on your bench while marking it out might work out ?
    I would love to get some video's, my nephew is an apprentice in HVAC, so I have been trying to help the kid out, just like you are doing here for us.
    Anyone with an open mind can learn something new everyday, regardless of age.
    I look forward to watching some of your other videos. I guess RUclips knows what I am interested in, like new or different tools, etc
    Thanks Ken, I am a tech dinosaur, I have a mechanical mind, not big on all this IT and computer stuff, I still have my old "pager or beeper' ... pre cell phones ...lol
    I am not sure were I would request some of your videos ?, I guess my nephew can help, he is up on all this computer and smartphone stuff ...lol
    Thanks again, the world needs trades people, a lot of women are getting into the trades, like most things, it gets easier as you learn the basics.

    • @kengodfrey1956
      @kengodfrey1956  Год назад +1

      I'm glad you found us. We have 10 videos posted so far
      I've been an hvac /sheet metal contractor for over 40 years. My wife and I started this channel to share lessons learned along the journey. All of our lessons have plenty to learn no matter what your level of training is. Thanks for spending time with us.

  • @bethhenry7761
    @bethhenry7761 Год назад +2

    Love your videos Ken, you are a source of huge knowledge and love the way you deliver your videos. I feel I am in the workshop with a beloved Uncle. Keep it up!

  • @beckermen
    @beckermen Год назад +1

    I'm impressed with the commitment to the warts. These videos are impressive for unedited and unscripted presentations. The performance on both sides of the camera impart a depth of knowledge and passion for this project. I bet you too are a hoot. Congratulations on the new grandbaby! Cheers and I'm looking forward to more videos.

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      It's how we wanna do it. It's an experiment of sorts. I wanted to see if I'm unique in the way I ingest and digest information. I teach in the way that I learn. It seems to resonate with the curious. The upside is that folks all over the world are challenging themselves to grow and become more capable. The downside is....... I'm not as unique as I thought I was. 😆 boo hoo! I'll get over it. Let's learn together. Thanks

  • @dostuffchannel
    @dostuffchannel Год назад +2

    The quality of content is amazing! You are great behind the camera and obviously insanely knowledgeable.

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      Wow, thank you! I'm glad you found value in our lesson. We appreciate your time. Thanks for learning along with us.

  • @jaredshearer7989
    @jaredshearer7989 Год назад +1

    I just came across your videos and binge watched them all. You are a joy to watch. The best compliment I can give is that you remind me of Essential Craftsman. Subscribed!

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      Good heavens that's awesome! I appreciate your encouragement. Thanks for hanging out with us.

  • @johnblystone8781
    @johnblystone8781 Год назад +2

    Thanks Ken.

  • @peterpalka4930
    @peterpalka4930 2 месяца назад

    Please don't mind the nitpickers in the comments. I find your videos packed full of valuable information, to the point I am going to have to watch them multiple times. I like the relaxed atmosphere too, it is so very refreshing compared to the try-hard click gathering maker content on youtube now. Thank you for making the effort.

    • @kengodfrey1956
      @kengodfrey1956  2 месяца назад

      @peterpalka4930 thank you for watching and encouraging us. This is a labor of love for us and we are having fun learning right along with you. I have always wanted to try my hand at teaching and we have been pleasantly surprised by the reception we have received. I've been a student at the school of hard knocks for 46 years. If I can save someone from a mistake or two I'd be a chump not to try. My folks didn't raise no chump, so here we are. Thank you for spending time with us we appreciate you.

  • @HildebrandGlossop
    @HildebrandGlossop Год назад

    I've been learning oxyacetylene and stick welding at my community college in Sonoma County. Seeing you doing this sheet metal stuff has really expanded my view. I'm planning to make your tool tray project using hand tools soon. It's kind of mind blowing what you can make with a few simple tools. I already have a lot of this stuff.
    I hope you all keep making these videos. They're fun to watch, you have a great teaching style, and I'm learning a lot.

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      When you move a project from your mind to a sheet of flat stock to a useful organizational container , it will affect you in a surprising way. We call it a tool tray, but it's really up to you, the creator, what goes inside. I want to hear from you after you tackle the task. We are glad you found us. Thanks for hanging out.

  • @Pete.Ty1
    @Pete.Ty1 Год назад

    👍👍👍.Thank you Ken

  • @johnnyslider9456
    @johnnyslider9456 Год назад

    Fantastic video Ken! Really enjoy your style and always learn a couple things

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      There you go! That's a good pace. Let's keep that brain in gear. Thanks

  • @johncourtneidge
    @johncourtneidge Год назад

    Hurrah! Thank-you both!
    A couple of possble funnel developments: add a handle? And a spout? And a collar to let the displaced air escape?

    • @kengodfrey1956
      @kengodfrey1956  Год назад +1

      Woah , slow down champ! I'm writing all this down....... seriously, good stuff though. 😯

  • @adamsdrives
    @adamsdrives Год назад

    I am loving these videos!
    You explain things in a very easy to understand but also complete way. I hope you’ve had the opportunity to teach at a trade school or local program at some point. And I hope these videos start getting even more views.
    I need to source the sheet metal but I’ve already got the tool tray and pans on my project list.

    • @kengodfrey1956
      @kengodfrey1956  Год назад +1

      This is my first crack at teaching. It's been a bunch of fun. We are having a blast. Thanks for learning along with us.

    • @adamsdrives
      @adamsdrives Год назад

      @@kengodfrey1956 I did it! I made the tool tray! Sense of accomplishment is spot on. I’ve made things in lots of mediums but this was my first go at shaping metal. So cool. The handle got a little wonky but it’s still great and my 8 year old son has already claimed it for his rocks. Thanks again for all you do.

  • @dannyhutcheson9932
    @dannyhutcheson9932 Год назад

    Hello Ken,
    Great video, you have a teaching gift that is very enjoyable, i hope to see more videos in the future. Thanks for sharing

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      Thanks for hanging out with us. Let's learn together.

  • @erroneus00
    @erroneus00 Год назад

    I'm loving this series. I've already planted the seeds with my son and we're going to go over all of your videos and build some things! First on the list is a "treasure box" for his favorite stuff. (If you were to feature this idea with your own design that would be awesome.) Another on the list is a battery holder for our electric bicycle. (Currently, the design is to use a bag strapped to the handle bars... horrible design)

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      Check out our deconstruction and visualization lesson. If you look real close at the briefcase and the nut and bolt tray, you might kick start the treasure box project. I'm excited about you taking on a project with your son. I always begin with a sketch and then picture it when it was a flat sheet.Thanks for spending time with us. Let's learn together

  • @louiedavis3138
    @louiedavis3138 Год назад

    Awesome lessons

  • @calvinray7683
    @calvinray7683 Год назад

    Ken idk if you have a video on basic welding but if you don’t could you please make one. The way you explain things is phenomenal

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      I've been teaching welding for decades. I'll kick it around. I think that's a good idea. Thanks for watching.

  • @nstrubhart
    @nstrubhart Год назад

    Love your videos. I grew up working remodeling jobs and building cabinets with my dad. After high school, I went to college and got a white-collar job, but I still use the skills I picked up working with my dad daily. I think it's awesome that you and your wife choose to spend your free time making videos to teach your trade to the next generation. Thanks for the great info, and congrats on your granddaughter! - Nic S.

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      I love your story. Working with dad didn't seem "lucky" at the time, but I treasure the work ethic and knowledge he instilled in me. I'm happy to share with anyone who is interested or curious. Thanks for hanging out with us

    • @johncourtneidge
      @johncourtneidge Год назад

      Yes x 2!

  • @tractorman4461
    @tractorman4461 Год назад

    That polyeurthane you used sure looked like a product I use called Vulkem 116. I always refer to using a scribe instead of a felt tip marker fir the exact reasons you do. I worked with guys that laid out with the old Majic Markers with a huge wide tip !! I never understood that at all. Excellent funnel tips Ken !!

    • @kengodfrey1956
      @kengodfrey1956  Год назад +1

      I can't fool you, tractor man. That's exactly what it is! It's our favorite. It ain't cheap, but when you don't have to go back, it's pretty affordable. Thanks for hanging out with us. It's always a pleasure.

    • @tractorman4461
      @tractorman4461 Год назад

      @@kengodfrey1956 I find your delivery very calming. Nice and deliberate step by step information with each statement. I never had the pleasure to work under such tutelage as a young fella breaking into hvac. The old timers I mostly worked around pretty much refused to answer even the simplest of questions. That's why I swore if I EVER learned anything I would give that knowledge to anyone interested in learning. I just wish there was this form of media back when I was still working. Keep up the good work Ken.

  • @RaymondWKing-dn8wf
    @RaymondWKing-dn8wf Год назад +1

    Hi Ken, I need to fabricate something along these lines for my Coal Forge chimney Stove Pipe. My Pipe is around 14 Inches in diameter, something to stop the Rane and Snow from coning down the Chimney, let the Smoke and Fly ash out, stop flying Vermin from nesting, and Birds, Squirls Racoons. what do you suggest?

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      That's called a storm collar. You will start by drawing a ring. The inside diameter is 15" the outside diameter is determined by your existing roof flashing diameter. You want the outside of your ring to be 4" greater than the flashing. Example, 16" flashing, 20" outside ring. After you cut out the ring, cut from the outside straight toward the imaginary center of the ring. Now you're ready to install the storm collar around your pipe. Over lap the ends till it's tight to your pipe and finish up with self tapping screws. Pointy tip type. 26 ga galvanized. Don't let your guard down, be vigilant, be safe. Have fun.

  • @Paul-tw6yf
    @Paul-tw6yf 11 месяцев назад

    Hi Ken, good job making these videos. You've simplified this process for novices. I'm an ex-insulator/sheetmetal worker and I find your videos very entertaining. I would like to comment on your use of polyurethane or butyl rubber sealant. I get really frustrated when buying tubes of sealant especially silicon based products. I find when I need a sealant (every 3 months or so) I go to reach for the tube of sealant and well you know, it's all dried up. At $12 a tube it can get expensive. Finally I got frustrated enough and grabbed my tube of "Shoe Goo" (name brand) you know the stuff that fixes athletic shoes, work boots or whatever else? I looked up the ingredients, besides the Toluene, Naptha (solvents), Shoe Goo contains a Styrene-Synthetic Rubber. I used this on a tower sprinkler connection that had come apart. I applied the Shoo Goo and riveted the coupling together. So far so good. What's cool about the Shoe Goo is it stays liquid, it comes in a sealed tube. You must keep the cap on it however. With other products you can seal the tubes but eventually they dry out. Then it's back to the store for more. Keep up the videos Ken. I enjoy your down to earth style of instruction.

    • @kengodfrey1956
      @kengodfrey1956  11 месяцев назад

      I never thought of shoe goo as a mechanical sealant. But here I am learning new stuff every day. Thanks. We are glad you found us and you enjoyed our lessons. I spent one summer back in 82 working for Metal Clad as a sheet metal/ insulator up in the high desert of California. Thanks for hanging out with us.

  • @GibClark
    @GibClark 8 месяцев назад

    👍🏻👍🏻👍🏻👍🏻👍🏻

    • @kengodfrey1956
      @kengodfrey1956  8 месяцев назад +1

      We are glad you watched the lessons. Thanks for hanging out with us

  • @Rodbuilder109
    @Rodbuilder109 Год назад

    How do you curve the metal if you don't have a roller system like you?

    • @kengodfrey1956
      @kengodfrey1956  Год назад +2

      Bend it around anything round. I've used a tree, a trash can , a pipe you get the idea. Always start with something large and gradually use smaller things till you get the diameter you want. If you start with the small diameter first you will get creases you don't want. Let me know how it goes. Thanks

  • @sjamesparsonsjr
    @sjamesparsonsjr 11 месяцев назад

    Is it okay to spot-weld after the application of Polyurethane glue?

    • @kengodfrey1956
      @kengodfrey1956  11 месяцев назад

      Polyurethane does not conduct electricity, so you need a very powerful spot welder to overcome that. Plus, it's gonna put off some kinda stinky cloud.

  • @Newslies1
    @Newslies1 Год назад

    In grade school (60's), I developed the perfect way to cheat on my spelling tests. Consequently, I still can't spell.

  • @EVILDR235
    @EVILDR235 Год назад

    In 1971 I owned two 1956 Chevy 210 2dr. hardtops. Much more rare than a Bel Air 2dr.Hardtop. I have owned eleven 1956 Chevys in total, two 57's and one 55. The one I owned the longest was a rust free, damage free 1956 210 4dr. sedan with a hopped up six cylinder engine. Had it for 34 years. I even have a metal model bank of a 56 210 2dr. hardtop. Probably more rare than the real car.

    • @kengodfrey1956
      @kengodfrey1956  Год назад +1

      You know your stuff. I've had this car for fifty years. Got it in June of 73. Ben told many times it's a bel air. Even at tri five events. It's our daily driver. Last year my wife and I drove it from nor Cal. To bowling green and ran at the tri five Nats. 5000 miles in 12 days. Nothing broke or fell off. Awesome fun

    • @EVILDR235
      @EVILDR235 Год назад

      I am from Napa California. I use to work at Brian's Salvage and Junk when he was located in Napa and later Vallejo. First in the late 1960' and later in the 1970's. We have been friends for 55 years and I got several cars and many parts from him. I have pictures from his first yard in Vallejo showing rows of tri 5 Chevys and many other old cars and trucks. Brian is in his 70th year of selling old car and truck parts. He has been driving two 1940 Dodge trucks since the late 1950's and uses them every day for his business. We get on the phone at least once a month and yak about the old days.

    • @kengodfrey1956
      @kengodfrey1956  Год назад +1

      My wife and I flew into Napa on Saturday and I took some kids up for their first airplane ride. Then we flew to half moon bay for lunch. Then home. Lotta fun.

    • @EVILDR235
      @EVILDR235 Год назад

      My friends wrecking yard is only about two miles from the Napa County airport. Small world. @@kengodfrey1956

  • @BobBlarneystone
    @BobBlarneystone Год назад +1

    A little spritz of 409 cleaner will allow you smooth the PU. And I think you'll find that FastOrange mechanics handcleaner will remove most sticky stuff from your hands.

  • @Americal1970
    @Americal1970 10 месяцев назад +1

    I have been wise cracked a couple of times for my spelling and sentence structure. I comment back
    "I am not takin, or givin a english lession or test. I am a 73 year old retired Pipefitter /Welder, disabled Vietnam Veterans. I find out I am Deslexic in my 40s, I'm not to good of a speller . So be it. BUT the question or statement is, are you smart enough to understand the comments here, spelled correct or not. LOL

    • @kengodfrey1956
      @kengodfrey1956  10 месяцев назад

      You seem like the kind of adventurer I'd like to spend time with. This is a labor of love, and I hope it helps all who are curious . Also, Thank you for your sacrifice in helping America be a strong and wonderful place.

  • @outsidescrewball
    @outsidescrewball Год назад

    Great discussion/demonstration…..simple PRO tip “don’t cover up”

    • @kengodfrey1956
      @kengodfrey1956  Год назад

      Thanks Chuck. You are the man. Btw I like all kinds of music except the chin kind.😁

  • @Eric_Schon
    @Eric_Schon Год назад

    I spell Polyurethane VULKEM. lol

  • @stich1960
    @stich1960 Год назад +2

    Anyone getting tripped up on your spelling is missing the point, appreciate the videos.