Do you know if the Hyte Y70 case has room to do a push/pull setup on the THICC Q60 using 25mm fans on the back side of the Q60 while using an RTX 4090? Maybe that would help?
Do you feel air current at the back of the radiator? I have a Corsair H150i Elite Capellix Xt with stock fans and I can barely feel hot air leaving from the radiator at the top of my case...
As UI designer i can imagine that somebody told designer that it will be app for other platform etc. and after designing it and developing "they" make decision let's move it to the other place without any UI inspection.
I much prefer my Galahad 2 LCD 360. I prefer having full control of the pump with a pwm curve from bios. When heavy gaming my pump only reaches 1600 rpm with my curve and the fans aren't too fast either. Silent bliss.
Why not take the Hyte fans off and place some Noctuas with high static pressure? It would be good to see what that extra thicc radiator us doing. Also, it is possible to remove that ridiculous screen? Does it have a Sim card slot? Now that would be cool.
Wow, so overengineered, so expensive and it sucks so bad. The price could be justified if that thing actually performed, but instead you're getting atrocious performance/noise ratio. Before they started innovating they should've perfected the basics first, but they seem to have missed this step.
Innovative design quite different from what we've seen mostly, but the performance isn't there and at 300$ even when comparing to other AIOs with screen it just leaves more to be desired. at this point most people should get some good 360 AIO, if you want a screen there are plenty of options. Personally I went custom loop with D5 pump and res I had lying (you can get something good for less than 100$) HW labs black ice nemesis 360GTS, fittings from barrow and direct die block from IceMan Cooler, at this point no AIO can get to the performance I have (and I can reduce the fan speed) and the price isn't that much more. I'm thinking of changing my case and to use 2 old black Ice nemesis 420GTX I have so I can have my GPU in the loop.
Also (2) - there list in oddly incomplete - that would fit in the Meshify 2 XL (easily) and yet every OTHER version of the Meshify 2 that is not small is listed. omega kek Hyte.
True you can mount it here if you want to, but if the tubes connecting the radiator to the pump are at the bottom, with the top end of the radiator above the pump. This will make it easier for the air to naturally sit at the top of the radiator or "BETTER YET" the radiator at the top of the case if there space for this THICC boy
FYI . . 17mm = 11/16ths of an inch in Bacon Units. Seriously though, if the Nexus software eventually has support for other brands lighting and fan control, it'll be more valuable to HYTE than this AIO. Make it open source. It really is a neat AIO. I'd be willing to bet it would be a perfect match with a 7800X3D.
Do you know if the Hyte Y70 case has room to do a push/pull setup on the THICC Q60 using 25mm fans on the back side of the Q60 while using an RTX 4090? Maybe that would help?
Do you feel air current at the back of the radiator? I have a Corsair H150i Elite Capellix Xt with stock fans and I can barely feel hot air leaving from the radiator at the top of my case...
Trust me, you don't want a loud pc setup lol
especially if you spend so much on cooling. For it's price you could go with a custom loop on budget/used parts
@@Mintor94 Yeah I don't see the point of this product. The Q60 has a ridiculously fast minimum pump rpm so it's a deal breaker for me.
It would be intresting to see the performance with good quiet fans like P12Max for example .
As UI designer i can imagine that somebody told designer that it will be app for other platform etc. and after designing it and developing "they" make decision let's move it to the other place without any UI inspection.
Why don't you show the noise-normalized performance against the Arctic LF II/III models? Was that part of the deal with Hyte?
Why should he? AF3 sucks ass on LGA1700
Any change in million years could you test Arctic Liquid Freezer 3 240mm?? Really interest to see how it stacks with so many you have tested.
I much prefer my Galahad 2 LCD 360. I prefer having full control of the pump with a pwm curve from bios. When heavy gaming my pump only reaches 1600 rpm with my curve and the fans aren't too fast either. Silent bliss.
Why not take the Hyte fans off and place some Noctuas with high static pressure? It would be good to see what that extra thicc radiator us doing. Also, it is possible to remove that ridiculous screen? Does it have a Sim card slot? Now that would be cool.
Your Arctic LF 2 and 3 had typos; says 420 instead of 240 as spoken.
he was comparing to 420 throughout the video, so if he said LFII or LF III 240, it was a mistake.
I wish they made a version without screen
Wow, so overengineered, so expensive and it sucks so bad. The price could be justified if that thing actually performed, but instead you're getting atrocious performance/noise ratio. Before they started innovating they should've perfected the basics first, but they seem to have missed this step.
Innovative design quite different from what we've seen mostly, but the performance isn't there and at 300$ even when comparing to other AIOs with screen it just leaves more to be desired.
at this point most people should get some good 360 AIO, if you want a screen there are plenty of options. Personally I went custom loop with D5 pump and res I had lying (you can get something good for less than 100$) HW labs black ice nemesis 360GTS, fittings from barrow and direct die block from IceMan Cooler, at this point no AIO can get to the performance I have (and I can reduce the fan speed) and the price isn't that much more.
I'm thinking of changing my case and to use 2 old black Ice nemesis 420GTX I have so I can have my GPU in the loop.
Holy noise!
Epic fail them not making 360 and 420 versions.
Also - they really need do a double-fin-stack with that rad too.
Also (2) - there list in oddly incomplete - that would fit in the Meshify 2 XL (easily) and yet every OTHER version of the Meshify 2 that is not small is listed. omega kek Hyte.
@ 4:55 I see the in/outlet hoses at the top.... nononono.... don't get me started...
problem ?
It is no problem with that unless the pump is the highest point of the loop
True you can mount it here if you want to, but if the tubes connecting the radiator to the pump are at the bottom, with the top end of the radiator above the pump. This will make it easier for the air to naturally sit at the top of the radiator or "BETTER YET" the radiator at the top of the case if there space for this THICC boy
Classic GN watcher without getting the point of the GN video.
FYI . . 17mm = 11/16ths of an inch in Bacon Units.
Seriously though, if the Nexus software eventually has support for other brands lighting and fan control, it'll be more valuable to HYTE than this AIO. Make it open source.
It really is a neat AIO. I'd be willing to bet it would be a perfect match with a 7800X3D.
why use reverse fans? having the frame on that side is so ugly
i would totally NOT buy it because of that gigantic monstrosity screen. jesus christ
right? i hope this is just a phase because Its honestly so gimmicky and lame. Hopefully we see some adult designs soon