DON'T LET YOUR SIDEARM FAIL YOU! - Basic Maintenance Pt. 2 | Airsoft GI
HTML-код
- Опубликовано: 8 сен 2024
- www.airsoftgi....
Don't have an airsoft gun to clean? Click here!
Kevin breaks down how to clean a gas blowback airsoft pistol..... Literally! These tips can be used to clean most gas blowback pistols on that market. We do recommend referring to your user manual if you don't know how to disassemble your gun. Using these tips will help keep your airsoft pistol ready to play when you are! Your sidearm is needed most when your primary goes down. Don't let your gun fail you in your time of need!
BE THE FIRST TO KNOW! 😘
RUclips (Subscribe!): tinyurl.com/nu...
Facebook (Like): / airsoftgi
Twitter: / airsoftgi
Instagram: / airsoftgidotcom
Amazon: goo.gl/okJAq2
______________________________________
Check Out Our Website Here!
www.airsoftgi....
For All New Guns and Products, Click Here!
www.airsoftgi....
For All Of Our Airsoft Guns, Click Here!
www.airsoftgi....
►►► Enjoy the video? Follow the link to subscribe: www.youtube.co... ◄◄◄
DON'T LET YOUR SIDEARM FAIL YOU! - Basic Maintenance Pt. 2 | Airsoft GI
I don't even have airsoft yet but this is entertaining.
I recommend getting into it bro. Its the only sport i didnt ever get tired of
@@Molehammad Oh trust me I'll get in to it, I watch a lot of airsoft games on RUclips and it looks so fun. Sadly where I live no one plays airsoft or dosent even know about the sport.
Bro it’s soooooooooooo fun
That's how I got started (at 49yr). ✌
@@rolling-thunder1499 check online for the nearest field?
Cisco is so funny behind the camera when he mocks Kevin. You guys should do a video on all the parts of Kevin’s Hi-Capa. “Old shirt that I got from Cisco when he was... smol” -Kevin.
Instruction not clear, my hi-capa turns into a glock
I’m sorry for your loss😔
As Kevin said, tRAsh
0:52 1911 is pretty hype
Nobody:
Not a single soul on planet earth:
Kevin: "the best advice i can give you is to take that pistol and throw it in the trash"
Also, he had some slight hesitation after he said he was joking.
I might as well have my novritsch ssx23 shipped to the dumpster then
(How would you clean a non-blowback?)
Non blow backs dont really need to be cleaned all that much, nowhere near as much maintenance as blow backs
Thanks!
Nah you can actually go ahead and let that get shipped straight to the trash
The Novritsch ssx23 can still have the slide removed.
I clean my non blowback by cleaning the barrel, and the hopup. I clean the trigger assembly when I get dirt into the gun.
Its a bonding experience, don't think of it as tedious. Nice content crew! Keepin it real!
any of you remember when tim and bob would at the beginning of every video go "Remember to subscribe"?
I don't remember it, and those were great times.
They built the success of airsoftgi's channel without needing to remind you(us viewers) to subscribe.
Tim and Bob were literally the biggest RUclips airsoft guys in NA
WUHAN WHEEEZER
Can I just use 100 percent silicone oil
Im SO DAMN GLAD I found you guys. My tactical master shot beautifully one night and i have not used it professionally yet. But I have been curious how to clean my gun and this video helps alot. I follow on instagram and you guys are hilarious on there too😂 thank you so damn much for these type of vids!!!
Do not pull the cleaning rod back through the inner barrel as any dirt and debris will not be completly cleaned out, like washing window with a dirty towel as an example
When are you gonna make another Budget load out videos? Those are my favorite
I agree
M 2
Solids vid, it is hilarious the difference between “airsoft dirty “ and realsteel. Especially .22 lr or suppressed .
Yall should review that new well gas blowback ak
Hey guys love your content
Can you guys make some videos on like a guide on how to go about on your AEG apart from maintenance
i think that was part 1
Silicone on silicone is bad, it can deteriorate the silicone components (mainly some types of o rings and bucking) thats why i avoid using green gas or silicone oil in my GBB. When i lubricate something i usually use something with ptfe
Damn I wish I could do this with my CHIAPPA RHINO but I guess that's happening any time soon.
Great video guys thanks👍👍
I just got a 1911 and I need like 5 replacement parts
Welcome to 1911s
Now I know you should see it tho
Did you get KWC 1911 by any chance? They are quite the trash
Don't get emg, sai or aw. Get a kjw and don't use co2. Co2 leads to more broken parts more often then green gas
Every body its because I take it apart and clean it a lot and it breaking
I always keep some gas pressure in my mags, clean, and lube my gun.
glad i use a 1911
Is there a a specific tool that’s needed? Or any is fine?
But what about my APS Black Hornet?
Fresh paint job drying on a hi capa as I watch this vid. 🙂
At least this will help me clean my airsoft pistols when I get 2 desert eagle pistols for my birthday
use puff dino sil free and you wont have all that crap in your gun!! might wanna try lubing the piston cup BEFORE you put the loading nozzle back in the gun, And lastly, you lubed the slide rails, no need to lube the frame rails too. Silicon draws water and dirt, the nmore you use the dirtier your gun will be.
My recoil spring doesn't come out. I have the high capa 5.1
I found this useful
This irks me soo much... Why do people use spray on silicone oil on the main seal and in the nozzle. If you spray a crap ton of it in the nozzle your going to shoot the oil into your hop up and basically make it useless. Use a small amount of grease on the main seal, NOT SILICONE SPRAY. (wiping a thin film onto the seal with your finger is ok though with silicone.)
Oh god I can't believe it took me so many comments to find this. When I him spray it like WD-40 all over everything and rub it in with his thumb, I almost cried
What size O-rings are you using on the inner barrel to stabilize it?
What’s the name of the silicon spray that you’re using
what is that pistol it looks amazing?
haha,i can fully comprehend....
that bucking all dirty and oily🤮😆.
mostly i also do it like shown but
sometimes i diassemble my glocks all the way in its parts and wash everything in hot water with dishsoap using a soft brush.
(wont believe how dirty the water gets),
then i dry everything while its still hot from the water and when done i fully dry everything with air from the compressor.
relube with silicone spray/oil and reassemble everything back.
light silicone wipe down and done.
squeeky clean and never had any problems in any of my gbb glocks.
i know,what i do,sounds over the top but i can asure you,that by wiping it down,you wont get it really clean.
all that grind dust from the moving metal parts are getting stuck in those
"no chance to reach by hands spots" and it will show after time and effect the performance.
try it,you will be amazed how clean your gun will be.you can even feel it.
What upgrades external and internal can I get for the KJW hi capas.
The spring thing is a myth. Even if it was, leaving in 5 or 6 in the mag would not pose any meareable effect under a million years or so.
Question I have a hicapa double bell baba yaga
Is rattle normal ? Slight spaces in between the slide and the base ?
Can we have a video of the breakdown of the pistol?
Great channel 👍👍👍👍👀👀
Do you guys have a vid for maintenance on a gun that uses C02 cylinders?
I feel bad for Cisco he just got weight checked
Novi mk23 only pistol if consider. I kan shake the gun for my self and scream bang if realism is needed.
How often?
revolver?
how long does airsoft gi shipping take for international free shipping
Does this apply to gold c02 desert eagle users? 😳😬
how do you know if the mag is full of gas?
Can i use bronze brush?
I keep max fuel and 15-20 bb in my mag all the time it is my home defense gun if someone breaks in ill just aim for the face. Soft tissue damage. I have had the mag 3 months had 1 leak around the lower seal that goes around the base so I changed it and now no issues. Except when I pull the hammer back and hit the trigger nothing happens
Why?
Not a great idea, yeah they may run off or they may now match or escalate and pull out a knife or real gun on you. Sorry about the airsoft issues.
@@progull I always have a knife and if they have a knife I know how to defend I shoot for the face and problem solved. Also the laws here are limited on guns not many have them here
What silicone spray was that?
when will you restock on the airsoft kits because I only have a spring airsoft gun and I would like to buy a better gun especially a assault rifle
G&G Combat Machine is a great starter gun
Maintain GBBR next plsss
What gun is that and where can I buy it?!?!?!?
Is there gonna be a video for GBBRs?
I used to run my hicapa 24/7 but ever since I got my elite force glocks I’ve been running them instead, for better training between real and airsoft training, I wish real 1911s were as reliable as a Glock, I’d run a 1911 24/7 real and airsoft🤣 well a hicapa is a 2011 but you get it🤣
so I always have to leave gas in it
Do you need to keep pressure in the mag if the gun is C02?
For CO2 thats a bad idea, and over time the mag will leak. The reason why its done with Green gas in small amounts is because it keeps the O rings lubricated since green gas has a little bit of silicon oil.
advantage of owning airsoft guns.....regular gun maintenance make i transition to real steel :D
I never got to go to my first game before lockdown :(
but what about my sig
I have tm hicapa 5.1 and I clean it after I play, I wonder if I should test what happends if I dont clean it (will it fail or work well)
It will work, unless you literally take it to the swamp or something similar.
Nothing will happen
Still need to empty my mag left bbs in mag for 2 months lol
Dont let your side arm fail you is the title then said maintenance but he keeps slamming the mag and not even cleared the gun before disassembling
Thanks it really helps on my first airsoft unit. My G19x would be happy😊
More hi cappa vids
Any1 know any thread on pistol comps?
What about CO2
How do i maintain a sniper i just bought one
It depends on which sniper u have but typically you wanna take the stock off/apart from the main assembly (normally there are some screws on the bottom of the stock). You wanna go about cleaning the main assembly (hop up, buckings, inner barrel, and other main parts that could use the cleaning). You might wanna finish it off with some grease around the moving parts. Then put the stock back on and blank fire a few times before testing it with bbs to prevent any possible mishaps.
What sniper did u get? I run a novritsch ssg 24
To the start if the vid i have a czp09 polymer if u dont like it send me a high capa then 🥊🥊
Airsoftgi or anyone i have got a NEW kp-06 and it came from redwolf. When i got it i opened the hicapa and i cant get the recoil spring and rod out so pleaseee i need help.
You need to push the spring guild forward and start unscrewing the portion of the spring guide that is sticking out of the gun.
Watch lots of videos 🙂
Do you sell it in India
I mean export in India
Yes they do ship internationally.
Btw Indian
Can I keep my Desert Eagle???
I use wd-40 in my airsoft,
I regret
were is roast my build
The slide doesn't come off of my gun
What gun do you have?
Rip
@@gaz6629 it’s whatever I don’t even use it tbh. I just use my g36
I want to get into airsoft also bit being 12 it is hard to find a good gun in my price range ive been eyeing a sig m17 but no real conformation if thats what i will go with @Alejandro Marrero
Lacer tactical that's gonna be the best guns u can get that fit your price range.
Don't get a pistol as a first gun. Find some fields that allow minors to play and rent the gear.
Is WD-40 a good lubricant for airsoft?
No it is not, it will leak into your bucking and your bbs will fly very crazy
Common misconception, WD-40 is good but it's not a lubricant per se. The WD stands for water displacement, its good for loosening moisture out of something that needs lubricating.
It's...good, it's good, it's..it's ENOUGH SILICONE OIL!!!
I’ve always known not to leave gas in your mags as it can put pressure on your gas release or whatever also been told to never touch your barrel unless you know what your doing because you can remove the very small coating of oil to help the BB’s fly out the barrel. Also can we talk about how he never cleared his pistol before disassembling 🥴
Do yall accept Euros €?
please don't leave it this long till you clean your gun...
Get some 1000 lube is also great
Instructions unclear: Currently in a 5 star police chase and £3 million in debt. Bad video, would not recommend.
4 views and 6 likes, also first
Loggiks
Airsoft gi😂 more like overpriced gi I checked the website out and some of the guns that are 500$ you can get them at just 160$ and they are the exact same gun just a scam to get more money out of you. Like a stock that’s 115$ when they are actually like 50$😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂🤦🏻♂️🤦🏻♂️🤦🏻♂️
Jairo Soto please show us some examples.
Airsoft GI like the Tokyo Marui M4A1 SOCOM Next Gen AEG Airsoft Rifle (Black). I don’t get how that’s 500$ unless I’m missing something here like a big feature or something? Idk but I’ve seen a exact model like that for only 160$
@@sgt.greenbean4155 You won't find a genuine brand new TM AEG for 160$. Even Evike is selling it for $499 with discount
Wow....this video is filled with unnecessary work and plain wrong information....never use silicon spray/light oil....you want grease so it doesn’t run all over the place....