I’ve gotta say Phil that that was really cool and I’m impressed because it reminded me of how my dad used to work and he didn’t like to waste anything and that’s how I am these days and to make a really nice practical thing out of a bit of scrapwood is what I’m all about and the result was fantastic. Thanks for that quick turning lesson have a great day :-)
What a cool project. I love the piece looking like a stove burner. Your comments are helpful and amusing. It’s testament to a good teacher that you can make jokes at your own expense, as your “what do I know comment”. Good session to watch.
Hi Phil... Exellent project as always... Loved your new tool ... I'm going to be making one of those!!... I have had a thoroughly entertaining year watching your videos... Take care...All the best.....Andy
I was just drooling over a site called Grizzly and thought of all the beautiful pieces of art you made. Haven’t had time to watch any videos for a week or so …. I was craving a new video
It's always interesting to find a piece of wood and wonder what how it can be used. I have buckets of "scrap" and dig through them every once and a while. It's fun to turn when you don't know what direction you are going. Nice turn, Lee
I have often been told to ‘keep it sweet and simple’. In my case it’s ‘keep it simple stupid’ 😂. Thanks for sharing; have a successful 2022; here’s hoping for a healthier one for us all 🌞
Really love the way you give specifics. Most turning videos don't give the info needed. Really great use of a small piece. I am now a new subscriber. Hope to see more soon.
Phil, I have been turning on a Jet 1442 lathe for about 18 years. Before that I learned on a homemade lathe that a friend gave me. My 1442 has the reeves pulley system. About 2 years ago I upgraded my 1442 from a 14" lathe to a 18" lathe. This Christmas I passed it down to my son who has expressed an interest in learning the craft. He's a natural. Mrs. Santa gave me the privilege this year of getting a new 1840VSR Jet like yours. I look forward to joining you, playing with my new toy. Watching your channel has proven to me that you and teach an old dog new tricks.
Hey Phil, sorry to here your having some health issues. All the best for the new year, you bring much joy to to hearts of your viewers. Take care, by for now. From New Brunswick Dean.
Fantastic little gift Phil, I have lots of old screwdrivers laying around, I now what I will be doing with them now 👍. Wishing you and all your family a Merry Christmas and all the best for the New Year. Regards Jim
Great to see you back at the lathe. Hope you are keeping well. Your work is an inspiration. Wishing you a Merry Christmas and a Happy new year from here in Scotland 🏴
I too keep all of these odd bits n bob cutoffs, one just never knows. Sometimes they get used as test pieces, or hammers or used to start the bbq! That said, your trivet turned out nicely. The star of the show of course was your one-of-a-kind HF beading tool! Nice work & Happy Health & Happy Holidays to you.
Hi Phil, As many others have already said that is s lovely looking trivet and a nice easy project as well. I may well be making some of these for my craft fairs. Take care my friend. Cheers, Huw
it was a very nice way to save a piece from the scrap pile. you are very inventive. it turned out lovely as well. it is always a pleasure to watch you create things. a very Merry Christmas to you.
Hi Phil I have to say that I absolutely love your work and your videos. I have also missed you the last few weeks, hope you are feeling better and I’m looking forward to the next video. I’ve been pulling pieces of wood out of my wood pile and I don’t even own a Wood lathe lol.
I see how I can use my own same "3 point homemade tool " (thanks for the word ) , woodturners have to solve problems available tools don't , imagine new cutting edges , that adds to efficiency and fun !
Howdy Phil I don't throw away much either and especially " wedges " .... I have glued a couple different woods together and made a bowl ! That is a great idea keep on turnin Have great holidays
Wood horders unite! We are a special breed of horders. "There is always a use for dang near any scrap of wood." "We just haven't found it's particular purpose yet." I'm just waiting for the exact right spot, and the funds, to get that tattooed on a video-worthy spot on my arm. That way when I get a decent camera and start making videos for my channel, it can be seen in most every video on my arm.
Hi Phil, I've been following you for sometime now and am always inspired by your work. I just took up wood turning 2 years ago after I purchased a 1965 vintage Craftsman lathe. It definitely has some limitations but I'm having fun anyway. I'm 77 so I have some affinity for antiques.: ). I've been missing your posts and hope that everything is well with you.
Nice one Phil! I came to the party a little late for this one, but next year I see a few Christmas presents in the making! Thanks and Merry Christmas Phil. Rick
Howdy Phil! I made one of those pointed tools a few years ago and love it. Also works well as a scraper in tight spots. Love the video! I think I'll make a trivet or two and put some felt on the bottom. 👍
Fantastic Phil. Take care!
😊
hello friends greetings healthy and successful always. thank you for sharing knowledge and always faithfully watching your latest stuff.👏👏👏👏
😊
Awesome as always Phil
😊
Great idea!
Glad you think so! 😊
but you didn't SIGN IT!!!...increases the value!...happy hols PHIL...great to see you back...hoping 2022 is better for all of us...cheers!
I did after the finish cured, Whitey. Merry and Happy! 😊
From scrap trash to treasure you keep amazing us God bless you Phil
Thank you, Rene! 😊
Love the wood trivet. Fun to see the wood mimicking the stove burners. Very cool.
Glad you enjoyed it, Nancy, thank you! 😊
Cool little project, 🎄🎄Merry Christmas 🎄🎄
Thanks, you too! 😊
I think the detail in the center made this piece! It’s almost like a nod to the bark on the outside! I vote, try this again!
Maybe after I learn how to use the dang tool, Chrissy! 😊
That is so unique and fun. I would totally be using things like that because I like the unique.👌😁 Nice job, Phil!👍👏🌞
Good to know, Sunshine, thanks! 😊
What a great idea. It came out beautifully! Thanks again for sharing Phil. ❤🙃
You are so welcome, Dotty, thanks for watching! 😊
Well, isnt that a little stunner. Lovely work Phil.
Thank you, Marc! 😊
Attaboy Phil!! 👍👍👌👌👏👏👏
Soo cool! Love it!
Thanks, Roy! 😊
Cool Phil. Fun, easy and a gift of appreciation. Can't lose. 🥰
Thanks, Connie! 😊
Your so modest 🤪
Your like “I’m impressed good job Phil “
LOL! Well, it just surprised me how easy it was and how well it worked! Thanks, Luie! 😊
@@PhilAndersonShadyAcresWoodshop 🤪👍😎
Phil, your the best. Thank you!
You are very welcome, Brent, thanks for watching! 😊
Very nice, Phil. The swirl in the center is nicer than you give yourself credit for. Have a very merry Christmas, my friend. 🎄🎁🎄🎁🎄
…..Gord
Thanks, Gord! Merry Christmas and a Happy and healthy New Year, my friend! 😊
Yeah, I usually see these pattern making tools in spindle mode, but that spiral looks nice. I agree with our friend Gord, great spiral.
I enjoy your projects because you make it fun . you explain what you are doing and add a little humor as well
I'm glad they please you, Dave, thank you! 😊
Sometimes we just need a small project. I hope to see you in the shop again soon. Gods speed with the recovery.
Thanks, Donald! 😊
I’ve gotta say Phil that that was really cool and I’m impressed because it reminded me of how my dad used to work and he didn’t like to waste anything and that’s how I am these days and to make a really nice practical thing out of a bit of scrapwood is what I’m all about and the result was fantastic. Thanks for that quick turning lesson have a great day :-)
Sometimes those scarp pieces are just the best! Thanks, Martin! 😊
Oh I'd love to have one of your trivets. That's a great idea. Good job on the grooves. Hope you're having a great day. 😉♥️
Thank you! You too! 😊
What a cool project. I love the piece looking like a stove burner. Your comments are helpful and amusing. It’s testament to a good teacher that you can make jokes at your own expense, as your “what do I know comment”. Good session to watch.
You are too kind, Nancy, thank you! 😊
Hi Phil...
Exellent project as always...
Loved your new tool ... I'm going to be making one of those!!...
I have had a thoroughly entertaining year watching your videos...
Take care...All the best.....Andy
Thanks a lot, Andy! I think it's fair to say there are several of us co-watchers that have been entertained by each others antics. 😊
I was just drooling over a site called Grizzly and thought of all the beautiful pieces of art you made. Haven’t had time to watch any videos for a week or so …. I was craving a new video
Awesome! Thank you, Tina! 😊
Love the swirl in the center. Looks like a whorled flower or a sunburst.
It does and I'm glad you love it, Mary, thank you! 😊
It's always interesting to find a piece of wood and wonder what how it can be used. I have buckets of "scrap" and dig through them every once and a while. It's fun to turn when you don't know what direction you are going.
Nice turn,
Lee
Thanks, Lee! 😊
That looked fun and easy , just like you said ! That tool you made really worked out well. Liked the decretive center you did. Well done Phil !
Glad you enjoyed it, Jason, thank you! 😊
I have often been told to ‘keep it sweet and simple’. In my case it’s ‘keep it simple stupid’ 😂. Thanks for sharing; have a successful 2022; here’s hoping for a healthier one for us all 🌞
Love that! 😂
I would have never thought of that Phil easy and pleasy and yes I definitely a great gift idea 👍👍
Cool, thanks, Charles! 😊
Learned something else new, again, thank you! I hope you have a lovely Christmas.
Thank you! You too! 😊
You are clever…..love it…..
Thank you, Hazel! 😊 Cheers!
Hello Phil hope your feeling better now my friend hope to see you soon take care 👍👍👍😊😊😊♥️
Thank you, Kelvin! 😊
'Tis a gift that is simple... Well done, Phil. Merry Christmas!
And fun to do, Crystal! Merry Christmas! 😊
Thanks Phil, real nice gift idea. Keep it up buddy.
Thanks, Bob! 😊
Great project Phil. I'm off to raid my husband's screwdriver stash. 🤣
😊
I like the subtle texturing. It was hard to see until you held up the end result. Very nice
I'm glad, thank you, Eric! 😊
Great info on creating 3 angle custom tool! Thank you!! Have a blessed holiday!
Same to you, Kathy! 😊
Something can be made from most any "scrap" piece. Well done. Everyone have a Merry Christmas.
😊
Very nice work! I Pray for your fast recovery
Thank you, Chuck! 😊
Yes, it’s awesome that you are in the shop! What a great little idea! Turned out wonderful! Thanks for sharing! Merry Christmas!
😊
Cool little hostess gift, great job as always
Yeah, I think so too, Michael! 😊
A delightful addition to any table. Wishing you good health, joy, peace and love throughout the holiday season and upcoming year.
Thank you so much, Vicki! 😊
Good morning, Phil. Quick & Easy. I love it. The Danish Oil was the icing on the cake, beautiful.
Merry Christmas, Phil.
Thank you, Ray! Merry and Happy to you! 😊
So happy to see in the workshop Phil. Clever idea indeed. 👍 Merry Christmas from Ohio.
Thanks, Jerry! Merry and Happy to you! 😊
Merry Christmas my friend.
....and now I know how to mount slabs to that darn addictive machine.
Merry Christmas Dennis! 😊
Great trivet. Even you simple turnings are a piece of art. God bless and Merry Christmas
Thank you, Michael! Merry and Happy to YOU! 😊
Really love the way you give specifics. Most turning videos don't give the info needed. Really great use of a small piece. I am now a new subscriber. Hope to see more soon.
This makes me happy, Frank, thank you! I will try to be worthy. 😊
A beauty from the least of these 😊
😊
Easy Peasy Phil. It's always a treat to see what you are going to make. WonderPhil video and piece. Wishing you a Merry Christmas.
Thanks a lot, Billy! 😊
Great idea, great work as always. I know it’s not as simple and easy as you said. You are very talented.
I appreciate that, thank you! 😊
Another delight Phil .You constantly inspire us to follow you.Terry Flynn down under
Thanks a lot, Terry! 😃
Well done Phil. Merry Christmas. Stay well.
Thank you, Stan! 😊
Very impressive Phil, thank you. Graham UK
Many thanks, Graham! 😊
Phil, I have been turning on a Jet 1442 lathe for about 18 years. Before that I learned on a homemade
lathe that a friend gave me. My 1442 has the reeves pulley system. About 2 years ago I upgraded
my 1442 from a 14" lathe to a 18" lathe. This Christmas I passed it down to my son who has expressed
an interest in learning the craft. He's a natural. Mrs. Santa gave me the privilege this year of getting a new
1840VSR Jet like yours. I look forward to joining you, playing with my new toy. Watching your channel
has proven to me that you and teach an old dog new tricks.
This is all great, Gerald! Enjoy your new lathe! This old dog is learning new tricks every time I'm in the shop! 😊
Very cool, love trivets. Most people don't even know what they are.
Merry Christmas and hope the new year will be better for all of us.
I'm with you there, Marge, Merry Christmas and Happy New Year!
Nice idea! Love the homespun tool too. Have a great and safe holiday.
Thanks, you too! 😊
I like the trivet and I like the idea with the screw driver
Great, thanks for letting me know, Amanda! 😊
Hey Phil, sorry to here your having some health issues. All the best for the new year, you bring much joy to to hearts of your viewers. Take care, by for now. From New Brunswick
Dean.
😂
Awesome trivet! It really is a great gift idea. 🎅🏾
Thank you, Leona! 😊
Oooh Phil Happy Day!
😊
Merry Christmas, Phil! I always enjoy your videos! Thanks for sharing your skills and talents.
Thanks for watching and commenting, Bob! 😊
You make it look so easy Phil.
Easy-peasy, Lain! 😊
Someone will be happy! Merry. Christmas Phil ❣️🎄
Thanks, Sara! 😊
Hi Phil
Good to see you are getting back to turning as your health improves, take it slow and easy.
Happy New Year from the UK
Michael
Thank you so much, Michael! Happy New Year to you as well!
Merry Christmas Phil you and your family.
Thank you, Jean, same for you! 😊
Fantastic little gift Phil, I have lots of old screwdrivers laying around, I now what I will be doing with them now 👍.
Wishing you and all your family a Merry Christmas and all the best for the New Year.
Regards Jim
Thanks, Jim, you too! 😊
Hi.Good to see you on the lathe again!
Hey, thanks, Ron! 😊
Great to see you back at the lathe. Hope you are keeping well. Your work is an inspiration. Wishing you a Merry Christmas and a Happy new year from here in Scotland 🏴
Thank you very much, Jim in Scotland! 😊
I too keep all of these odd bits n bob cutoffs, one just never knows. Sometimes they get used as test pieces, or hammers or used to start the bbq! That said, your trivet turned out nicely. The star of the show of course was your one-of-a-kind HF beading tool! Nice work & Happy Health & Happy Holidays to you.
So true, Mark. Thank you! 😊
Hi Phil, As many others have already said that is s lovely looking trivet and a nice easy project as well. I may well be making some of these for my craft fairs. Take care my friend. Cheers, Huw
I bet they sell like hotcakes, as we say here in the US, Huw. Have fun with them, my friend! 😊
Really nice Phil. Definitely a great gift idea. Thx
😊
it was a very nice way to save a piece from the scrap pile. you are very inventive. it turned out lovely as well. it is always a pleasure to watch you create things. a very Merry Christmas to you.
Thank you, Joyce, same for you! 😊
What a great little gift, Phil, and easy too! Wishing you and yours a very Merry Christmas!
Thank you, Marcia, same for you! 😊
Hi Phil
I have to say that I absolutely love your work and your videos. I have also missed you the last few weeks, hope you are feeling better and I’m looking forward to the next video. I’ve been pulling pieces of wood out of my wood pile and I don’t even own a Wood lathe lol.
Hahaha, good for you! You'll be ready when the time comes! 😊
Great idea, Phil! Thanks for the video!
Thanks for watching, Eileen! 😂
What a nice little.project. Great idea to make your own tool.
😊
I see how I can use my own same "3 point homemade tool " (thanks for the word ) , woodturners have to solve problems available tools don't , imagine new cutting edges , that adds to efficiency and fun !
Yes, it made it easy and fun, Youenn! 😊
Howdy Phil
I don't throw away much either and especially " wedges " .... I have glued a couple different woods together and made a bowl !
That is a great idea
keep on turnin
Have great holidays
Thanks a lot, Bruce! It's good to have company! 😊
Wood horders unite! We are a special breed of horders.
"There is always a use
for dang near any
scrap of wood."
"We just haven't
found it's particular
purpose yet."
I'm just waiting for the exact right spot, and the funds, to get that tattooed on a video-worthy spot on my arm. That way when I get a decent camera and start making videos for my channel, it can be seen in most every video on my arm.
Your always making me laugh Phil. Thanks 🙏
Glad to hear it, Craig! 😊
Really nice, Phil. I hope you're feeling much better. Merry Christmas and Happy New Year.
Bill
Thanks a lot, Bill! Merry and Happy to you! 😊
Thanks for this Phil. Love the screw driver tool. Have a great Christmas. 👍
😊
Hi Phil,
I've been following you for sometime now and am always inspired by your work.
I just took up wood turning 2 years ago after I purchased a 1965 vintage Craftsman lathe. It definitely has some limitations but I'm having fun anyway. I'm 77 so I have some affinity for antiques.: ).
I've been missing your posts and hope that everything is well with you.
I'm right there with you antique wise, Bob! Thanks for taking your time to watch and comment! 😊
So cute. Happy Holidays to you and your family. I love your creations and creativity.
😊
Thanks Phil, nice simple project.
And FUN! 😊
Great use of a piece of cutoff. Hope you have/had a great Christmas. I know whoever got that will!
😊
Great work 👏! Merry Christmas to you and family! Take care and GOD BLESS 🙏!
Thank you, Stephen, same for you! 😊
Merry Christmas Phil. Such a simple idea but such a useful gift. Hope you are feeling better, Dave
Thanks a lot, Dave! 😊
Lovely gift…Merry Christmas!🎄🎄
Thank you, Carol, Merry and Happy to you! 😊
Really cool, fun project! Tx for sharing it ‘for all to enjoy’. Merry Christmas!
😊
I really enjoy new and interesting ideas. Thanks
😊
Nice one Phil! I came to the party a little late for this one, but next year I see a few Christmas presents in the making! Thanks and Merry Christmas Phil. Rick
Great, thanks, Rick, Merry and Happy to you! 😊
Merry Christmas Phil, what a cool idea will try making some of them plus the tool idea!!!! 😊
I'm telling you, Emmett, that tool is cool! 😊
Lovely little project and it really does make a lovely gift x Hope you have a lovely Christmas Phil x
Thank you, Tracy, same for you! 😊
I Like it! The trivet is so simple, yet attractive. The decoration is also so simple. Nice one! Happy New Year!
Thank you, Stephanie! You too! 😊
Great gift piece enjoyed watching you create this Beauty. Great job Phil Merry Christmas to you and family
Thank you, Rich! Here's to a better new year, too! 😊
Howdy Phil! I made one of those pointed tools a few years ago and love it. Also works well as a scraper in tight spots. Love the video! I think I'll make a trivet or two and put some felt on the bottom. 👍
😊
ABSOLUTELY BEAUTIFUL
😊
Great idea and a beautiful piece. Merry Christmas Phil 🎅🤶⛄️🎄♥️🦌❄️
Thank you, Maddie! 😊
Pleasure as always,I hope you’re feeling better merry Christmas 🎄
Thank you, George! You too! 😊
Good to see you messing around in the wood shop again!! (and uh, my birthday is Saturday)
Happy birthday, Kent! 😊
HAPPY BIRTHAVERSARY! And a Merry Christmas to you as well.