You are doing right. Front end definitely needed to be stronger looked pretty week. It will be 10 times better when you are finished Will be a cool ride when you are finished. Merry Christmas and God Bless you and your family and Happy New Year. The way your channel is growing I think you will hit a 100k within the first 3 to 5 months of 2018!!!! Keep up the great work and videos!!!
YO long videos are ok I personally perfer to watch you complete the project in one episode but I know sometimes time and circumstances won't allow so just keep filming editing and learning you get it down packed. Be blessed Jah Rastafari
It's getting there,.. Now all you need is maybe like a gsxr750-1000cc motor. That would be wicked sweet!! I was curious about the front end y'all welding up... If you take all the flex away, will that cause it to snap/break somewhere??? Seems like stronger more sturdy would be better. Then the amount allowed to give a lil so it doesn't snap while driving, that confuses the hell outta me. Anyway keep'em comin 😎👍..
Almost forgot,.. When you make new roll cage plz plz make it as low profile as possible. Widen the overall stance and cage but lower the height,.. Well I've seen soo many buggies ruin their looks when they go tall bulky lookin idk maybe its just me thinkin this??? Perhaps like the Ariel Nomad type look. Dude that yrf'dogg would be 👌 perfect layout for it but a lil bit smaller version. That'd be first one made 🤯..
I have been waiting on this video. I have a spiderbox that I rebuilt and put about a 12hp modified 212cc predator engine on and I'm actually shocked at how well it pulls. I have been seriously thinking about putting an 18hp duromax engine on it.
Maybe I missed it in the video, but where did you get the improved spindles and A-arms? Do you have an idea as to when you will do a video on adding the suspension from a 4 wheeler to a go cart?.
Honestly if you go independent rear and weld on a proper top cage you could do some real rock bouncing. I'd also run 30"+ tires with at least 18" of tread width for the rears. I am kicking myself for selling mine now that I have seen what others have done.
I know ya'll tied by the hip to G.P.S. but if you want the correct boots the set aint but $12 from buggy depot. www.buggydepot.com/product/201/steering-rack-amp-pinion-boots-long-short-set.html Most guys ditch those problematic ball joints and replace them with heim joints.
Red, I'm noit being a safety Sally here but you need gloves and sleeves when welding. I'm 44 now and have had to have 4 skin cancer spots cut off my arms from welding my entire life with just a hood. Never cared about burns and I don't remember being told about cancer from welding flash. I'm not a welder by trade either, I'm a mechanic who welded some. It's not fun getting big holes chk ked out of your skin looking like small pox vaccination scars but on your forearms. Just look out for your kids man it's not worth it. Now Every time a freckle looms different I have to go in and get it hacked. I have 3 more coming off next month do it's not a cut off and it's over.
I actually enjoy watching long videos like this
Nice video man! Always awesome to see family working together. 👍🏼
Very nice demonstration , shop's really coming together .
Really enjoying your videos, keep up the great work y’all really do a good job
Love your vids have a Merry Christmas!!!!
Merry Christmas to you & your families
Merry Christmas to you as well brother and God bless
Turn the wire speed up on that welder. Lol. Fyi, I'm excited to see the finished product. love the videos keep them coming brother
+Building Stuff n Things it was doing that because some paint was still on the metal
Looking good and HAPPY Holidays to you and yours.
Merry Christmas man
You are doing right. Front end definitely needed to be stronger looked pretty week. It will be 10 times better when you are finished Will be a cool ride when you are finished. Merry Christmas and God Bless you and your family and Happy New Year. The way your channel is growing I think you will hit a 100k within the first 3 to 5 months of 2018!!!! Keep up the great work and videos!!!
Well man we appreciate it. We hope to keep on growing. God bless you as well and have a Merry Christmas
I'm rebuilding mine as well. New steering rack, ball joints & shox
Holy cow, Im in the top 5 first comments! Great to see these projects coming back!!!
Instructions, Men dont need stinking instructions!
Ur video are great keep it up
Go carts, buck knives, and guns. My kind of people.
YO long videos are ok I personally perfer to watch you complete the project in one episode but I know sometimes time and circumstances won't allow so just keep filming editing and learning you get it down packed. Be blessed Jah Rastafari
It's getting there,.. Now all you need is maybe like a gsxr750-1000cc motor. That would be wicked sweet!!
I was curious about the front end y'all welding up... If you take all the flex away, will that cause it to snap/break somewhere??? Seems like stronger more sturdy would be better. Then the amount allowed to give a lil so it doesn't snap while driving, that confuses the hell outta me. Anyway keep'em comin 😎👍..
Almost forgot,.. When you make new roll cage plz plz make it as low profile as possible. Widen the overall stance and cage but lower the height,.. Well I've seen soo many buggies ruin their looks when they go tall bulky lookin idk maybe its just me thinkin this??? Perhaps like the Ariel Nomad type look. Dude that yrf'dogg would be 👌 perfect layout for it but a lil bit smaller version. That'd be first one made 🤯..
Whats up Red Beard!!!
I have been waiting on this video. I have a spiderbox that I rebuilt and put about a 12hp modified 212cc predator engine on and I'm actually shocked at how well it pulls. I have been seriously thinking about putting an 18hp duromax engine on it.
We have a ton coming for this kart so definitely stay tuned
R.B.G rocks
Did you try bench bleeding the master cylinder sometimes they get an airlock that can be difficult to remove.
Yeah Im going to pull it off and try to
Where did you find that rack and pinion with extra grooves I've looked everywhere unable to find it. Please help awesome videos btw
Buggy depot
Maybe I missed it in the video, but where did you get the improved spindles and A-arms? Do you have an idea as to when you will do a video on adding the suspension from a 4 wheeler to a go cart?.
For your next build you should make a dually off road gokart
I think we want to do a dual rear axle kart
Honestly if you go independent rear and weld on a proper top cage you could do some real rock bouncing. I'd also run 30"+ tires with at least 18" of tread width for the rears. I am kicking myself for selling mine now that I have seen what others have done.
Also glad to see you welded up the front box.
We have a independent rear suspension in mind to do very soon
Where did you get the front hubs and did they come with the brake rotors or are the rotors from the GPS kits?
Where did you find you upper and lower a-arms and spindles at
I didn't see links for the steering rack, spindles and a-arms. Did everything you used in this build come from gopowersports?
Please make a whole tube bulk head make it strong asf
What wheel hubs are those with the disc brakes rotors
Are you going to get the billet rod flywheel and valve springs from performance 670 for your 670?
Yeah later on we will fully build the 670. Right now we are just going to remove the governor and do valve springs.
Didn't see a link for the ball joints, or more specifically, the little triangles to reinforce the a-arm. Got a link?
Yeah I will put them up in a little bit
Just a suggestion, keep the roll cage as low profile as possible. The lower it is the better it’ll look
Yeah thats what we plan on doing. Should be done after Christmas
I need that rackapin
i like long videos
Idk what I would do without rachet wrenchs
The old knuckles are thicker metal on the top
It just needs a smog pump supercharger
I have been thinking about that
Try putting a crf 50 sprocket one the red Coleman mini bike
Should be a lot stronger and look great polish that aluminium
There is not aluminum on the front of this kart
Anyone else think its funny when he says anywhere's, no where's. Not hating, I'm from the south also.
Got that ole TN slang in me lol
I'm ok with longer vids.
Do more with coleman minibikes please
We have a few videos planed to do with them soon
I would like to be able to support you financially but i cant even give you some bike stabilizers for support lol
Lol its cool man we just appreciate you watching
can you do a briggs and stratton engine build
I will soon. I have a lot of them under my work bench
thats nice
Or you could build a dual motor gokart
Bad ass mode*
My problem with doing this kind of stuff is, I woukd have a hard time putting it back together. Is it just me ?
Its not real hard. If you need to take pictures when your taking it apart and that can make it a little easier to resemble
Red Beard's Garage u no it's funny that you say that because my step dad told me that's what he does sometimes when he's working on bigger projects
If you have a broken go kart can you sell it on Craigslist I’m looking forward to buy a kart that’s broken so I can fix it
Noice
I know ya'll tied by the hip to G.P.S. but if you want the correct boots the set aint but $12 from buggy depot.
www.buggydepot.com/product/201/steering-rack-amp-pinion-boots-long-short-set.html
Most guys ditch those problematic ball joints and replace them with heim joints.
Slam them tools down like you just don't give a (F***) but it's all good. It's your crap
Just an idea
What's the subliminal message at 19:17?
1st comment
Red, I'm noit being a safety Sally here but you need gloves and sleeves when welding. I'm 44 now and have had to have 4 skin cancer spots cut off my arms from welding my entire life with just a hood. Never cared about burns and I don't remember being told about cancer from welding flash. I'm not a welder by trade either, I'm a mechanic who welded some. It's not fun getting big holes chk ked out of your skin looking like small pox vaccination scars but on your forearms. Just look out for your kids man it's not worth it. Now Every time a freckle looms different I have to go in and get it hacked. I have 3 more coming off next month do it's not a cut off and it's over.
Yeah I wear gloves when im welding a lot just got a bad habit of not doing it when im tacking stuff together
Yeaaaa I’m third
Why do i want to see a 670 swapped into a bmw isetta
Mamador el carro
Where did you get the black spindles from?
Well knuckles as you called them