Build this - Joytrainer mini | How to make an RC airplane?
HTML-код
- Опубликовано: 14 июл 2024
- This model airplane is a trainer, an evolution of the project we made some time ago, the Joytrainer, that airplane was big and cool, it was based on the Simple Storch by Flitetest, some people wanted to have a smaller version, also I thought it should be compatible with cheaper components, and so I did it. The new model is portable and simple to make.
0:00 Intro
0:52 plans
1:53 cutting the material
2:51 shaping
4:14 glue the fuselage
7:52 control surfaces
8:44 empennage
9:14 wings
12:51 motor
14:26 connectors
14:57 control horns and servos
17:21 paint
19:39 strap the battery
20:17 landing gear
22:43 push rods
23:59 center of gravity
24:43 flights
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
List of components used:
2206 or similar motor with 1600KV - 2600KV.
5 “- 7” propeller (use the one recommended by the motor manufacturer).
Recommended battery for beginners and stable flights: 2S from 2200 - 4000 mAh. (Do not fly on windy days with this configuration). For more power: 3S from 1500 - 3200 mAh. (You can fly on a bit windy days and do maneuvers).
X4 micro servos.
ESC of 30A with BEC.
Radio and receiver of a minimum of 4 channels.
X4 20 cm servo extensions.
⭐⭐ For a complete list of materials and components + download the plans go to the post: joyplanes.com/en/joytrainer-m...
⭐⭐ Take the course to build this project joyplanes.com/en/mini-course-...
This course will show you everything in detail + access to our private Discord channels for members of this course.
Use the coupon: IMFIRST10
and get 10% off, only for the first 10 to buy.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⭐⭐ Join our new Discord server ⭐⭐
☛ / discord ☚
Become one of us:
goo.gl/zKQ706
Facebook
/ joyplanesrc
Instagram
/ joyplanes
#JoyplanesRC #HobbyRC 
Хобби
![XO (Only If You Say Yes) - ENHYPEN エンハイプン 엔하이픈 [Music Bank] | KBS WORLD TV 240712](http://i.ytimg.com/vi/wBT1bKKwPTo/mqdefault.jpg)
you dont know how long ive been searching for a good tutorial
yeah me to
Same
Very effective use of lazer cutting. Turns an ok model into an awesome one! Well done!!
i build the Joytrainer, very easy. And it was so fun to fly with it. So next, this one ! nice job guy, you helped me a lot
This is a very good tutorial for the complete beginner. I'm about to embark on my first foam build with a precut kit, but I hope to follow up with some scratch builds.
Just discovered RC modelling, fantastic video! Tempts me to do the same myself
You can do it!
really appreciate the way you explained. it gave a lots of motivation to me . Finally i copied my first rc plane in same lines and really it flies well. thanks. only issue faced is given fine edge to the upper potion of wings.
Great build. Not many curvy parts, thus making the build easier. Will make a one for me soon. Keep the good work👌👌
I really enjoyed watching this video. Like a combination of plane builder and designer. Great job!
I fly a ready made foam plane and have been amazed at the level of repairs that have been possible yet it still flies perfectly. My plane did not include your fancy landing gear design. I don’t think it has rolled truly straight for dozens of flights (this is tricky for take off but perhaps worse for landing because it is like applying vast amounts of braking force when it touches the grass at which point it would nose over and put the rudder into the turf). I plan to make a new gear support soon, meanwhile I have learned that a bit of throttle at touchdown keeps it on its feet.
I hope to build up the confidence to try this design! Thank you for explaining each step with video showing the details!
Saya suka sekali jika joyplane upload video seperti ini. Sangat menginspirasi
Nice detailed Video Sir. I am gonna build it!!
Today printed your plan, started to build. Impresive. Very solid, simple, and well thought plan. Have suggestion wings are ~53 cm, but lot of people buying foam in 50 x 50 cm, it is used for ceiling, cheap to buy. If plane were 10% smaller, would be easier a bit. Another thing, have you tried to print plan on sticker? That way probably would be a bit faster, because, you can instanstantly cut sticker and foam.
i couudnt find any better videos then this
love your explanations and build
(i subed)
This is awesome, I'm going to try, very nice!
Nice model.
You did a great job designing and building this plane. We in the hobby appreciate what you have done. Its not easy designing and building an RC plane, let alone making a video. I am not an expert at any of it but know enough to help others save money by giving people tips on how to get into the hobby. Any time someone can save money and get into the hobby, they can enjoy what they have done because its something they have done. Anyone can buy a ready to fly airplane if they have the money. Ignore those people that send you negative comments concerning your design and build. Those people have nothing better to do and couldn't design a soup can telephone on a string. Its a great hobby and hopefully many people have tried your plane.
Thank you so much. Your comment is equivalent to a $10 donation but in moral credits.
Nicely designed. I am focusing more to glider types. My first build is slow flyer rc glider plane
Perfectly done, good tutorial 👍
Thanks a lot!
Ive just making planes from foam so this video was very helpful thanks
perfectly made brother and thankyou for sharing the measurements and i liked your site also. thankyou so much.
Most welcome 😊
Very useful building video and super easy to follow.
Glad you think so!
Nice, Im'a build this next.
Your videos are pretty amazing. The last time I flew a remote controlled plane was in the mid 1960s. It was a one button system that activated a solenoid on a rubber band loaded escapement. Things have certainly come a long ways since then. Thanks for putting out such wonderfully detailed videos on this great art.
Be well,
Isidro
I was so waiting for this video
The video i was waiting for
I really love your build videos.....your build videos are too satisfying. Big fan bro
Thanks a ton!
Build videos are awesomr
Am really got inspiration from you to my build my plane project ❤🎉 thanks a lot my lovely brother joy 😊
I thoroughly enjoyed this video. Perfectly paced and well put together. I've been toying with a foam build for some time, so this looks to be the ideal starting point. You now have another happy subscriber |:o)
nice work
So cool
I wanna build cloud149 cinewhoop but being a student I gotta save up a good time... I've bought flysky fs-i6x tx and use it for liftoff and velocidrone. Now I'mma get 2 2207 motors and 2 3s packs and get cheap esc and servos and mke this! At least I'll have something to fly as I save for my future drone❤
Very pedagogic vidéo.
Molto simpatico👍🛩
Amazing video! Very detailed very well edited, I am going to make one too
So good 👏
Two 👍👍 great work keep it up
Love from India
Me too 😀😀
love your vid
Cool, I built one like this one, and put the rudder servo in the same spot, just found this video.
Nice 👍
wow a flight test copy cat sweet!
In the UK, Hobbycraft shops stock A1 size foamboard. I find that soaking any paper you want to remove is easiest... it just rubs off.
What a great channel .......i loveit and i sub
I just joined the course. I see a lot of plans ans videos on building planes but seem to go to fast or not explain everything. Youe channels does everything I need. Thanks
Nice plain iam a made this plain
U r OP
عالی بود
I'm really enjoying the process of building this. I skipped the lading gear but now I'm trying to make one - what are those things you used to secure the wheel in place in the wire? And the wheels, did you buy them? I'm thinking of making ones from foam
I love this and have had the plans printed and will be building soon. I want to add the same vinyl decals to mine specifically the JOY TRAINER. Can you share what font this is?
Thanks to your video and links, I am building my first RC plane and I'm 74 years old. Thank you for that. I could very well do without the music though. Just building sounds are also a good soundtrack. The music you use does spoil the pleasure…a bit.
lol
Hey man made one in just 26 minutes. Kind of like fly test but longer. Any advice on flying in the Smokey mountains?
Great built sir... 🤩🤩 but Links given below for plans and course were not open.... Please check this link sir.
Good video, useless plans with no identification printed on all the cutout pieces. Similar to a puzzle with all white pieces. After printing a random stack of unidentified patterns, I tossed them and drew my own. Worked fine and was much quicker than trying to figure out the pile of random cutouts.
Im looking at plans with notes as to what they are. They only pieces without notes are the two fuselage pieces and the vertical/horizontal stab. But its pretty obvious what they are, esp if you watch the video
Nice plane, How do you design your planes? They are great! :)
It's a combination of 2D and some times 3D design. I'll make a video later on that.
@@Joyplanes sounds great
If I use 1000kv bldc motor with 10inc propeller, is it good for this size model?
FT is No.1 ,Its Not bad but FT very very nice and Perfect.
Not all FT planes are great. I have had to modify all the ones I made. Usually the angle on the firewall is not right and doesn't take in account the forces that make the plane want to turn left upon take off. Not one of their plans compensate for the issues involved. That being said, foam board is cheap so its easy to fix any issues with these planes. He does a great job on this plane and his design is pretty interesting concerning the curve of the wing instead of using the methods used on all of the FT plane wings.
Perfect? Have you actually built one? I have built two different models and both required modifications to fly. The angle of attack on the motor on both of them was off, I had to pull out the fire wall on the Tiny Trainer and readjust it. On the Simple cub, I had to add washers on one side so fix the bad tendency it had to bank severely to the left and down too much. No ,Flite Test planes are not perfect. If you listen carefully to Josh B, he even mentions making corrections or hints is more like it. Every RC plane requires adjustments eather through the transmitter or mechanically to make them fly better. There is no perfect RC plane.
What is that song used in the beginning? Trent Palmer uses it in his intro and I haven’t been able to find it!
For a begginer that is building the joytrainer mini is it better to buy a 3s baterry and a 2s one or two 3s ones (because my supplier does not have the 2s I want in stock)
Sir can I use 1000kv brushless motor?
The 2200kv is really expensive
Please reply
Hallo very good rc plane
Can you put some plans for the self made centralgravity tool thank you
I'll make a video about it.
Amazing. can I get the plan draw of this please?
You have some nice design ideas I haven't seen in other foam board planes. Flies nice and slow. The problem is that for beginners, crashes are inevitable and foam board compresses and creases easily, usually resulting in major damage to the front of fuselage, wingtips, and tail structure. Though the materials are cheap, there's a lot of labor involved, and seeing my nice plane significantly damaged on the first flights is disheartening. Can you figure out how to make it a lot more resilient?
Some more reinforcements can be added but takes a bit more work.
You can buy foam, paper sandwitch, it's very strong, or you can make it yourself, just glue stronger paper to both sides of foam. Or some people add scotch after build.
I've found in my first build of one of these larger joytrainer planes that you have room to add some weight by reinforcing some areas with thin hard types of wood. I've also found that when I have a hard crash it's easy enough to cut a piece off that broken and replace it with a new piece just glue it in and tape over it. I've had some hard landings and caused some severe damage. Took me a pretty short amount of time to repair in all cases. And repairing your model is kinda part of the fun in my personal experience.
subscribe to you keep them coming nice mate hope to see ya out on the dalky cliffs or howth
How many centimeters high are the wings to make the dihedral?Thanks.
is it alright if i use 9g servos please answer as soon as possible
if i wanted to place the wing below is it the same process?
Were can i get planes to download for this build mate thanks, Nice job mate i look forward to building this
Excellent great 😃 job
Hi Joyplanes, I just wanted to ask where I could buy the 2 pieces of a1 size, 5mm thick foam board and the landing gear wheels and wires? I can't find it on amazon. Thank you😃Btw, this video is very helpful.
Where you get your foamboard from in Europe ? I am not able to find a source, I am from Slovakia.
What are Nessacary setting required for printing the A4 size paper
Hi, another great video. I have to ask, where do you get your foamboard? I live in Ireland myself and can’t seem to find it locally.
Easons, and the best for a bunch of 10 A1 boards is vikingdirect.ie for €43
@@Joyplanes No way! Lol, I can’t believe I never checked Easons. Must give a look at Vikingdirect too. Thanks for the info and keep up the excellent videos.
no way i looked in easons couldn’t find it but mr price in nutgrove sells it have 7 sheets 👍👍🤙
I will be building my first plane soon, may you please make a detailed list of the electronic components used and all materials
All is in the post, link in the description.
which paint did you use on this Depron sheet ?
I am planning to make this plane out of corrugated plastic. If I were to use an internal combustion glow OS Engine, which size of glow engine would best suit this plane?
Can someone please help reply?
@Tamil Mani OS .10 or smaller I think.
Can you make a video about flysky fsct6b configurations..?
that is awesome, but it looks like you have heavier foamboard than flight test would use, does it affect the plane much
It's still very light, I'm not sure what weight difference it is.
@@Joyplanes its about 50% heavier than flitetest. if you make a flite test model. increase the wing area slightly to compensate for the extra weight, then they still fly great.. i love your planes as there designed for our heavier foamboard from the outset so build exactly to your specs and it'll fly great. keep the vids coming mate. thanks
I tested it the flight test or redi bord what I use is 25 grams lighter than normal foamboard for each sheet
You think it would fly well as a 3 channel?
Awesome video! But in the link it doesn't say anything about the spinner that you used
True, it's a small one, BenchCraft 38mm (1.5") 2-Blade Plastic Spinner w/ Metal Base from motion RC
Can I use 2200kv motor and a triblade 5inch prop
Would it compatible 3s 2500 mAh 12C Li-Ion battery ?
after building the mini with the cheaper foam board, I have found the more expensive foam board. Does it matter and what would you recommend
Dollar tree is the way to go. It is MUCH lighter than Elmer's or other nice boards.
3:23
Which paper size this mesurment printed?
The site is down for the plans
Which flight controller did you use in the build?
Even as an experienced pilot I have enjoyed your videos and wanted to build this plane for my 12 year old daughter. I downloaded the plans 3 different times in the tile format, it does not give me the floor or top or the wing spars or measurements also no detail for landing gear would really like to have
But the latest version have all the pieces including the spars, also the landing gear will be added later.
Can i use cardboard carton if i have not depron foam
But which material is used, i saw white material but what is this material foam board or anything else?
Can I use this plane airfole shape wingspan like clarky
Does anyone know of good local stores to get this kind of thinner XPS foam for sale in the USA? Cant find it at Home Depot or Lowes. Just thick roof and siding insulation and theyre 4'x8' sheets or something..
Great video! Id love to be able to make this but im having a problem finding the most important part, to the foam board lol..
i got mine at the dollar tree had a ton of foam sheets. first time build but i know my grandfather always used dollar tree foam for his plane build and probably maybe upwards of 150-200 in his lifetime
dollar store and hobby lobby normally has foam boards
What size foa board is best? Will 2x A1 sheets do it?
Yes, x2 A1 is perfect
How to complete learn making these types of rc planes
Please suggest me
Beautiful aeroplane but where I buy this foam in indian website
where are you from India? Foam boards are available on rcbazaar, Amazon India and few local shops at Pune and Mumbai.
Where can I find this type of material?
Bro me puedes ayudar con el plano o alguien sabe donde lo puedo descargar
how much weight can the motor hold
Which knife you use to cut foam boards??
The hobby knife but any sharp knife will work
i built this plane and i have 2 3s 1000mah battery should i connect them in series to make one 3s 2000mah battery?
If you do that, you will get a 6S battery.
Almost your techniques is I dentical to what I employ, the only difference is the way I drill styro and cutting 45⁰ and I don't paint my model instead I use colored packaging tape 8f different colors
The link to download the plans doesn't work. How can I get the plans? Thanks