No overheating Duker, its only if shes held on full 300hp load for a long drag she puts exhaust temps in red ready to burst turbo but the radiator never lifts! I need a bigger turbo lol
Considering you lose 10/15hp from engine to the PTO. 140hp engine would be 125 on the shaft. It’s not too far away. They weren’t a great puller in 50k. Little tune up to 170/180hp and you wouldn’t know it.
I’d be a tad ticked at 123hp but at the same time I’d be happy it’s not 225hp and she’s been tuned to the gills for 22 years and everything is worn out, Top tier video all for a good cause
Great video as always! Aye big blue governor was shaking the dyno so i had to hold revs back untill they had enough load to stop her bouncing the governor, i held her back too far and missed my peak power missing out on top hp of the day 😭
Be nice to see few more videos just on the trailers an machines that the tractors pull even if it was only during winter months boys because I spied them Smyth trailers behind Conor omg they are class lookin
Wasn't the 6910S rated at 150, and standard 6910 140? Of course you loose some horses along the drivetrain, but it's most likely a little tired. The 110-90 was looking good, and if it's not turboed 106 is really good. I've seen 110-90s dyno 300hp in Finland, so there are some potential in those tractors!
If the 6910 was to be dyno’d in the 1000 box why was the pto gear/speed selector on the right beside the seat set to 540 or is it back to front in her?
Did Connor have the power quad in powershift 3 as that's direct drive through the gear box and did he turn the air con off as uses 8 hp to drive the aircon pump simple little things make all the difference on the dyno she should be at least 135 to 140 at the shaft
@@farmflix copy that. Our 6900 Dyno run was 152. She was a young lass tho, few years ago now. Look forward to seeing why she is lagging so much. Needs more fuel.
6910s had 10hp more than the standard 6910. She should be 140hp on the shaft by right, losing 10% or so through the transmission, so she should be 150hp on the engine. 123 is very bad, are fuel filters clean and How's the screen on the bottom of the diesel pump in the tank? That could be clogged?
He said exactly what you need to know about deere do this 2k break that 10k if you go thru deere for the parts extra 1500 for the green paint just get a real one and you can have enough left over to get a 2nd one 🤣🤣🤣🤣
![Fortnite Logo [REMAKE] (Windows8.1 AUTTP ATHDTC's Version First Images of November)](http://i.ytimg.com/vi/SuE6KIlXyac/mqdefault.jpg)
Think it was over £12,000 raised for OG Cancer and the Air Ambulance. Well done to Stevie Evans and everyone involved.
Well done for letting that woman explain what is behind the tractor 🦕 test gets that message about cancer. Great video. 👍🤠🚜🇮🇪
yes Ant needed to be shared
Best video John has done for a while. Young Connor is on way to a firm favourite
sure you know yourself
No overheating Duker, its only if shes held on full 300hp load for a long drag she puts exhaust temps in red ready to burst turbo but the radiator never lifts!
I need a bigger turbo lol
Considering you lose 10/15hp from engine to the PTO. 140hp engine would be 125 on the shaft. It’s not too far away. They weren’t a great puller in 50k. Little tune up to 170/180hp and you wouldn’t know it.
Oh we'll get her sorted Gerry :)
Great video FarmFlix keep up this great work
cheers boss
Great video - thanks guys!
I’d be a tad ticked at 123hp but at the same time I’d be happy it’s not 225hp and she’s been tuned to the gills for 22 years and everything is worn out, Top tier video all for a good cause
It maybe was at one time and it’s been backed down to hide some problems 😂
A full service and she’ll be up to spec again I reckon
@@gregshearer423 hope not haha
@@frederikspannerolesen9514 we'll get her sorted ;)
Thats very true
Great video as always!
Aye big blue governor was shaking the dyno so i had to hold revs back untill they had enough load to stop her bouncing the governor, i held her back too far and missed my peak power missing out on top hp of the day 😭
Still a beast and there will always be another day ;)
Great video. Legends at work!
Thanks Ewan
great video need to get the 6910 tuned up are 6900 was doing 140 Hp there on the dyno day
Thanks Ciaran, aye we'll have to get a proper look
Was horner on the helium 😂
See Whang there in the back ground, you may get down to see him again!!
Be nice to see few more videos just on the trailers an machines that the tractors pull even if it was only during winter months boys because I spied them Smyth trailers behind Conor omg they are class lookin
They're Brian Horner's and there's a full episode with them on the FarmFLiX app - free trial will let you watch it ;)
Where was the footage of the dynos and results
What legends will appear today
the grey fergie the legend
How did the 6290 get on?
I imagine better than the 69 lol
Wasn't the 6910S rated at 150, and standard 6910 140? Of course you loose some horses along the drivetrain, but it's most likely a little tired. The 110-90 was looking good, and if it's not turboed 106 is really good. I've seen 110-90s dyno 300hp in Finland, so there are some potential in those tractors!
6910 rated 140 on the engine And 125 on pto
aye we'll need to have a play about :)
Wonder how much h p the massey 6290 wos ?
When use going to Crawfords Farm ???
If the 6910 was to be dyno’d in the 1000 box why was the pto gear/speed selector on the right beside the seat set to 540 or is it back to front in her?
thats a question for conor or john
She's on the money 125hp just looked it up 140hp engine
we'll find a bit more in her ;)
What did tye 6290 dyno
more than ours lol
@@farmflix wouldn't be hard against the john deers 🤣🤣🤣🤣
5000 Is the rod
oh yes
What power was the 7740 newholland
not sure chief
Did Connor have the power quad in powershift 3 as that's direct drive through the gear box and did he turn the air con off as uses 8 hp to drive the aircon pump simple little things make all the difference on the dyno she should be at least 135 to 140 at the shaft
we'll have to train him :)
Back in around 2006 your 6910s used to put out 150 on the shaft, I'm sure she was measured. She needs some work John!
all fun and games :)
Big fan 🔥👌
thanks Joe
It's a 6910 man! 150 for sure!
need to blow the cobwebs out
@@farmflix copy that. Our 6900 Dyno run was 152. She was a young lass tho, few years ago now. Look forward to seeing why she is lagging so much. Needs more fuel.
Only supposed to be 125 up at pto and 140 engine
Man the 6310 i drive almost makes the same power XD
and its stock
heartbrake but it is what it is :)
Need to get that sticker of the7810
lol
6910s had 10hp more than the standard 6910. She should be 140hp on the shaft by right, losing 10% or so through the transmission, so she should be 150hp on the engine. 123 is very bad, are fuel filters clean and How's the screen on the bottom of the diesel pump in the tank? That could be clogged?
Aye she needs a proper look over and a few things checked ;)
Fuck it would’ve loved to seen the 6090
What did the 6290 do?
oh now
Does that mean she returned some impressive numbers?
110-90’s are 95hp standard
My first one was screwed to 115 then turbo’d made 130
nice :)
Lovely 6910
cheers boss
6910s are 150 standard are 140 I drove a standard for years it was 40k it was putting out 165 👌👌👌
Nice :)
He said exactly what you need to know about deere do this 2k break that 10k if you go thru deere for the parts extra 1500 for the green paint just get a real one and you can have enough left over to get a 2nd one 🤣🤣🤣🤣
Awful pity ye didn't show the 6290 after your 6910 when there such similar tractors or where ye afraid 😕 😂
petrified lol
Love the vids farm flix do is do maybe a little more than grassmens but grassmens do a good job to
🤣 grassmen if you want a bit of clothing for the young fella for Christmas but if you want to see real life senarios you'd best subscribe to farmflix
Massey men sensitive? Cheek!
wild all together
👌Sirrr
;)
First
second
John Deere 6910 are way overrated and overpriced for what they are same as a new Holland TM 155 way overpriced
think everything is overpriced these days
If these guys would learn to speak english,they could have a lot more followers.
Fuck it would’ve loved to seen the 6090