Using extenders for bike ramp
HTML-код
- Опубликовано: 25 авг 2024
- The Neo-Dyne loaders can be equipped with many accessories such as extenders - you can load bikes pretty high, like 1,5 meters or on top of your bed cover to leave the cargo bed empty, for storage.
Love the ramp,love the bike ,love the truck ,love the video💯🔥
Thanks, Mc Sazza!
Cool. Do I need the manbun for proper operation???
Usually Dave shaves his head:) davewillems.nl/
No but if your over 50 your definitely going to need a pair of memory foam sketchers
I’ve got this same set up on my 2021 GMC Sierra with multi-pro tailgate to transport my 2019 Road Glide. “No” weight on the tailgate with some shimming of the polyurethane feet.
We tried it out at 650kg, like 1,500lbs I guess. Say your tailgate is 2' or 650mm long. If you shim it to get a 3/4" gap, or 20mm from the edge of the tailgate to the rear pad, then I'd say your tailgate will be fine.
@@neodyneloaders5410 I should’ve been clearer, I did shim the foot at the tailgate end of the bed, the foot on the tailgate just “kisses” the tailgate so all of the weight is supported by the bed. This is a great rig!!
@@kenjohnson9472 Good stuff!
I would make an option to leave extension on and flip it up vertically/maybe help secure back wheel.
Yes, that could work very well on bikes with no overhangs. However if you have long stacks or saddle bags, like on a Goldwing, the main ramp will need to be much longer to use a flip-up extender. But yeah, good idea!
Very impressive 👍
Thanks mate!
That’s a great idea thanks
Wonder how long that tailgate will last with all that stress on it.
The ramp clears the edge of the tailgate by roughly half an inch. You can see that clearly on the movie loop on our site. Anyway, as the bike is loaded, the alloy beams bow slightly and the gap is closed. Pressure on tailgate when loading a Fatboy is around 100kg/200lbs - will last a long time.
Excelente sistema
Gracias!
How much is this?
$2,500 depending on accessories
Is that knobbie bobber, or a bobby knobber ? Don't look like no off road sicle to me
What is your track model? Explorer sport trac 2005-2010?
Will this fit in an 8' truck bed and allow the tailgate to close?
Yes, the ramps can be cut to custom lengths. For shorter beds we also have the AUN 250 ramp solution: ruclips.net/video/i2ajV86mzFk/видео.html
Slick
Thanks!
I have a 5 inch lift on my Silverado. Is this gismo compatible ?
Yes it will. The AC 001 extender will do the trick.
Whats the weight limit
550kg/1200lbs
is this available in the USA
Yes, please get in touch with our official reseller at: ultimatepowerramp.com/
That is the best in other wards that is a clasik design
That is the best in other wards that is a clasik design
Thank you for the reply if this is the owner off the design I will tell a friend off mian I gave him my 1979 harley Davidson low rider thank you again
Cost?
The ramp starts from 1925 euros excl. VAT. You can see all the prices for the ramps and the accessories at neo-dyne.com
@@neodyneloaders5410 That's not very expensive, in fact, it is dirt cheap. Broken backs and damaged dropped motorcycles cost waaaay more, never mind the PTSD and embarrassment.
@@tedmarakas2626 Thank you for your kind words!
Ma quanto costa schemi me lo faccio io con cuscinetti guide e motorino d avviamento a 12 volt
Buona fortuna, fammi vedere quando è finita
Bet that costs an arm and a leg.
You'd lose your bet
for that price.. just buy a small trailer... half the cost....
...double the pain
wait for it...,🤣😁😄
Yeah with the "generic" cordless it takes like 40 seconds. With a top of the range one you're looking at 25 seconds. If you need faster lifts, we can always add a starter motor to the worm drive, but it will cost, mostly in the installation of cables etc.
Non riesco a postare i video riesco solo a vederli devo trovare una persona che mi insegni
Se desideri mostrare la tua invenzione al mondo, è meglio richiedere prima un brevetto. Per mostrarlo su youtube, potresti chiedere aiuto a una scuola o università locale. I ragazzini sono molto bravi a pubblicare film su youtube.
Meh. Not even a real bike. It's just a Hardley.
Too much contraption going on.
Don't be so lazy. Call your dudes joking around and take that shit off of that pickup 🤣🤣🤣
Lazy? I can't lift half a ton by myself mate
Bravo. D O C T O R E. !!!!!!!!
Thanks man, it took some work but here it is.