I am so glad I found these tutorial video, it was so clear and I m happy that this is my first my first time successful solve a cube blindfolded, thank you so much
Thanks a lot!! I appreciate you putting so much time into this tutorial series. You explain everything so clearly that it is easy to follow and the examples are very helpful!
Some Beginner 3BLD Solvers, I have a tip for this algorithm (Parity algorithm 2:00 ) You can do the Ra Perm for this as it does the same thing ( R U' R' U' R U R D R' U' R D' R' U2 R' U' )
The Solving Edges practice, I did it normally Blindfolded (because I Know how to do 3bld) and I average about just over 10 mins and im watching your series because I get some helpful tips😅 and what was your first 3bld success? Mine was 7 mins and 54 seconds
I actually used orozco for my first success for some reason (would not recommend) so it took me ages but I eventually got a 5:3x for my first, something around there
Sometimes when I am doing the edges I find it easier for me to just use the J-perm instead of the T-perm in some situations to make setups easier. I realized that the T-perm and J-perms very nicely complement one another when certain letters are hard to setup to the T-perm. I still use the same buffer, just that C will be the target when using the J-perm instead of D.
I like to use as few algorithms as possible, and so, whenever I am using Old Pochmann I hate having to use the parity algorithm. What I find easier is to just memorize edges A and D as being swapped whenever we have an odd number of corners. I memorize the corners first, and so whenever odd, I always remember the A and D edges as being swapped, which eliminates the need to use the parity algorithm. Doing it this way, the edges will always be even and never odd. I memorize the corners, then the edges A and D as being swapped and then I execute the edges first, followed by the corners last, since edges are harder to remember I like to execute them first. Now, after those even edges are executed, A and D are already swapped, and so, after executing the odd corners those A and D edges magically fix themselves without needing any parity algorithms. I noticed by doing it this way, it always either causes us to do the same amount of algorithms, or sometimes saves 2 algorithms since now we don’t need to worry about that smelly parity algorithm. For example, instead of 11 letters to remember for the edges plus the parity alg making 12, sometimes it will be 12 even edges instead, being the same amount of algs to perform and sometimes it will be 10 algs instead of 11 odd plus parity, saving two algs from needing to be performed! I still haven’t mastered 3 style, and maybe i never will, but I love to do Old Pochmann for the corners and advanced M2 for the edges.
Thanks charlie, this is the best blindfolded tutorial. After doing some practice from ur video(the examples at the last), i successfully did my first solve. Thanks a lot broo!!
for the edges can we use the j perm rather than using long set up for certain cases? For example if I want to swap B with C I make a J perm instead of doing long set up and then a T. And for the corners can we also use the y perm normally ? If i wanna swap A with K i can Just do R then the Y perm instead of doing D R to set up
I had a mbld comp yesterday and I did 1.5/4 cubes (I didn't memo the last half of the cube so I got a dnf but the half cube that I did memo I got right!!)😊 thanks for the tutorials man!
LETS GOOOOO. My first sucxessful solve!!!!!!! forget to time tracing 4 min excecution. I didnt look at cube and I wrote down the traces and read that so I didnt need to memorize. either eay im happy
Hi Charlie, Thank you so much! I can finally solve rubiks Cube Blindfolded. BTW I had a hard time understanding how to solve the cube if the buffer is already solved or just flipped at its solved position. Can you suggest what should I do? Also, when will the part 4 come?
Hey Charlie! I hope your having a great day. I have one question though, do you have any tips on setup moves for flipped edges for white and yellow (like the ones you showed at around 10:12)? Because I am having a hard time trying to find how to swap them or the correct setup moves.
I would love to learn 3 style at some point, I just can’t seem to understand it well enough and so I am stuck using OP for corners and M2 for edges. I gave 3 style a shot but I just couldn’t understand it very well.
There is but you shouldn't learn them right away. You can instead just use the normal algorithms as if you cycle broke into the flip as you memorised (discussed in part 2)
Hi i am from sri lanka my freind are very fast at 3×3,2×2 and other i cant beat them i thought i failed but this videos blew up a flower in my head and i am practing 3bld ti my next comp thanks charlie i will practice and break the nr od sri lanka and be a good bld solver thanks for your help please put the p4 of this as soon as you can i am waiting bye have a good cubing journey
For memo and exec of corners it's easier for me to use E as the buffer instead of A is that okay? Should I switch to A as my buffer? I use the same alg and same buffer piece just different letter for the buffer
It is OK and some tutorials actually teach using this! BUT, you need to know that your target position would instead be V, instead of P. And so you need to setup your targets to V instead of P.
@@swiftcubing yeah I know and I remember For some reason it's easier for me to do it like that Maybe because I already learnt it from j perm and now I'm used to it idk 🤷♂️ Anyways you said it's okay to do it like that right?
Hi Charlie so i really like the video it really helped me but i just did'nt understand what to do when the buffer is twisted. Could you help me please???
Bro casually made the best rubiks cube blindfolded tutorials ever
Fr
ariiiiiiiiiiii
Agreed
I am so glad I found these tutorial video, it was so clear and I m happy that this is my first my first time successful solve a cube blindfolded, thank you so much
That's awesome to hear. Good job!
Thanks a lot!! I appreciate you putting so much time into this tutorial series. You explain everything so clearly that it is easy to follow and the examples are very helpful!
Thankyou so much! That's awesome to hear that it was helpful! I hope it helped you on your blindsolving journey, and good luck with the rest of it!
Your 3x3 blind series will go crazy viral with some time! It’s the only one that I can actually understand lol
you taught me in 1 sitting how to solve 3x3 blind, well done and thanks :) finally got my 1st solve
Can’t wait for part 4!!
Charlie, part 4 wheeennn?!!??!!
Great vid Charlie.
Now i can memorize all of the pattern because of you🙏
Thanks for the best bld tutorial 😁
Great vid Charlie!waiting for pt 4
cant wait for pt.4
Got my first BLD succes in comp last week! Drilling my memo with the first 2 parts really helped.
Good job! I'm glad they could help
May the Lord grant yu subscribers and billion viewers...yu are the Next Jperm😊😊❤❤❤
Great vid
Love how simple it is to follow along.
What cube do you use for blindfolded
Some Beginner 3BLD Solvers, I have a tip for this algorithm (Parity algorithm 2:00 ) You can do the Ra Perm for this as it does the same thing ( R U' R' U' R U R D R' U' R D' R' U2 R' U' )
thanks, I wasnt sure if it was Ra or Rb
@@bruhseelas you're most welcome. Don't Forget to put the last U' move, or else it'll be messed up.
@@Cubicity_213 thank you so much!
@@bruhseelas 👍
The Solving Edges practice, I did it normally Blindfolded (because I Know how to do 3bld) and I average about just over 10 mins and im watching your series because I get some helpful tips😅 and what was your first 3bld success? Mine was 7 mins and 54 seconds
I actually used orozco for my first success for some reason (would not recommend) so it took me ages but I eventually got a 5:3x for my first, something around there
@@swiftcubing Yeah you are fast at your first solve but when should I learn Orozco? And when 3 Style?
Sometimes when I am doing the edges I find it easier for me to just use the J-perm instead of the T-perm in some situations to make setups easier. I realized that the T-perm and J-perms very nicely complement one another when certain letters are hard to setup to the T-perm. I still use the same buffer, just that C will be the target when using the J-perm instead of D.
I like to use as few algorithms as possible, and so, whenever I am using Old Pochmann I hate having to use the parity algorithm. What I find easier is to just memorize edges A and D as being swapped whenever we have an odd number of corners. I memorize the corners first, and so whenever odd, I always remember the A and D edges as being swapped, which eliminates the need to use the parity algorithm. Doing it this way, the edges will always be even and never odd.
I memorize the corners, then the edges A and D as being swapped and then I execute the edges first, followed by the corners last, since edges are harder to remember I like to execute them first. Now, after those even edges are executed, A and D are already swapped, and so, after executing the odd corners those A and D edges magically fix themselves without needing any parity algorithms. I noticed by doing it this way, it always either causes us to do the same amount of algorithms, or sometimes saves 2 algorithms since now we don’t need to worry about that smelly parity algorithm.
For example, instead of 11 letters to remember for the edges plus the parity alg making 12, sometimes it will be 12 even edges instead, being the same amount of algs to perform and sometimes it will be 10 algs instead of 11 odd plus parity, saving two algs from needing to be performed!
I still haven’t mastered 3 style, and maybe i never will, but I love to do Old Pochmann for the corners and advanced M2 for the edges.
Bro
I LOVE YOU!!
THIS IS THE BEST BLIND TUTORIAL EVER!!
Thanks you so much!👍👍😁
i almost there(so happy), but also a little bit confused? I am sure that i will get it soon!! AMAZING Tutorial Charlie!!
Thanks charlie, this is the best blindfolded tutorial. After doing some practice from ur video(the examples at the last), i successfully did my first solve. Thanks a lot broo!!
Thanks. I'm so glad it helped!
Thank you very much for reading and answering my question!!!
where were these videos all my life 😭
You should totally try a 3-style series at some point!
What is the best cube for blindfold solving
I think it´s the Dayan Tenyun v1 or v2
LET'S GO, ive been waiting for this soon i can solve it blindfolded
Sorry for taking a while, but now it's here and good luck!
Thanks, its okay. I really apriceate how much time and effort you do to make the torturials.
Me tooo❤❤🎉
So good!
for the edges can we use the j perm rather than using long set up for certain cases? For example if I want to swap B with C I make a J perm instead of doing long set up and then a T.
And for the corners can we also use the y perm normally ?
If i wanna swap A with K i can Just do R then the Y perm instead of doing D R to set up
Swift cubing second best you tube channel best for blind
I had a mbld comp yesterday and I did 1.5/4 cubes (I didn't memo the last half of the cube so I got a dnf but the half cube that I did memo I got right!!)😊 thanks for the tutorials man!
Pretty solid. Hopefully you can get that 4/4 soon!
@@swiftcubinghaha thanks! 😁
LETS GOOOOO. My first sucxessful solve!!!!!!! forget to time tracing 4 min excecution. I didnt look at cube and I wrote down the traces and read that so I didnt need to memorize. either eay im happy
@@MoyuGuy niiiice bro good job!
Hi Charlie, Thank you so much! I can finally solve rubiks Cube Blindfolded. BTW I had a hard time understanding how to solve the cube if the buffer is already solved or just flipped at its solved position. Can you suggest what should I do? Also, when will the part 4 come?
Part 4 is already up!
Amazing👏
Hey Charlie! I hope your having a great day. I have one question though, do you have any tips on setup moves for flipped edges for white and yellow (like the ones you showed at around 10:12)? Because I am having a hard time trying to find how to swap them or the correct setup moves.
I would love to learn 3 style at some point, I just can’t seem to understand it well enough and so I am stuck using OP for corners and M2 for edges. I gave 3 style a shot but I just couldn’t understand it very well.
Charlie i´m learning orozco and m2 but i have never solved the cube blindfolded.
Should i learn it or just go with Old Pochman
I think it is best time learn with old pochmann first. Then once you have gotten a success you can try out learning other methods. Good luck!
What if the edges or corners are flipped is there algorithms for that?
There is but you shouldn't learn them right away. You can instead just use the normal algorithms as if you cycle broke into the flip as you memorised (discussed in part 2)
When is part 4 coming? I can’t wait😁
Charlie just became endlesss......
Charlie be like: Starts a video and it becomes the best video ever
jk this is the best video
Im having alot of trouble with part 2 in cycle breaking the edges.
YES cheggins lets go
Hi i am from sri lanka my freind are very fast at 3×3,2×2 and other i cant beat them i thought i failed but this videos blew up a flower in my head and i am practing 3bld ti my next comp thanks charlie i will practice and break the nr od sri lanka and be a good bld solver thanks for your help please put the p4 of this as soon as you can i am waiting bye have a good cubing journey
Good luck!
For memo and exec of corners it's easier for me to use E as the buffer instead of A is that okay? Should I switch to A as my buffer? I use the same alg and same buffer piece just different letter for the buffer
It is OK and some tutorials actually teach using this! BUT, you need to know that your target position would instead be V, instead of P. And so you need to setup your targets to V instead of P.
Thats what ive been doing
@@swiftcubing yeah I know and I remember
For some reason it's easier for me to do it like that
Maybe because I already learnt it from j perm and now I'm used to it idk 🤷♂️
Anyways you said it's okay to do it like that right?
awesome tutorial but my brain is a bit fried so ill watch part four and do it tomorrow
After you finish with the 4 part series will you do an advanced bld tutorial? Like M2 or Orozco or another mothed? Anyways good videos!!
I intend to make more tutorials, enough to get people from complete beginner to pretty fast
Cool, I learnt a lot from your tutorials!! Thank you!
Thank you very much! Will you make a tutorial on 3 style too?
I intend to eventually
when are you doing the 3 style tutorial??
when should I start learning 3-style? I average about 2 or 3 minutes with M2/Orozco
Hi charlie i was wondering i can solve a 2x2 blind but i learned that e swaps with v should i relearn it your way?
Which cube should I buy for bld? What cube is best for bld?
moyu GTS3m
Name of cube plz
Great video 🎉
Hi Charlie so i really like the video it really helped me but i just did'nt understand what to do when the buffer is twisted. Could you help me please???
got xq to memo, what do you do :/
Oh another question in corners can I change the buffer sticker?
Which is the best rubiks cube for bld Orozco?
What cube did you use?
When is part 4
hey eggins, what if ur sovling bld and u get a solved buffer edge piece what to do then?
Can you do a orozco method video
Don't forget to make a Cheggins theme song! (Oh wait, wrong channel.)
Question: how to know when to stop memo
Help in the first edge practice when I finished there where still 2 edges not solved
13:56
Check out part 2 which talks about cycle breaking which should solve this
When is part four coming?
Do you know when you will be making part four???
It's coming soon hopefully, been busy but it's certainly a priority
Can you make a tutorial on 3 style
I intend to eventually
Question instead of doing Dw can I just do a slice move
You can as long as it doesn't effect the pieces that you can't effect and does set up the piece that you are trying to set up
Can that R perm switches to some other R perm?
Yes, you can use a different algorithm as long as it swaps the same pieces. So make sure you are doing the right R perm and AUFing afterwards
I use a diffrent ra perm
What do u do when buffer is already solved
Covered that in part 2!
I miss j perm April day videos 😢😢
Yeah, same, but atleast we got this guy
wym he just uploaded one lol
followed the first two videos thoroughly but lost track with this video ughh. ig this is too much for my little brain
does it matter which r perm I use?
i am used to the u d gen version
Ye that's fine to use!
When part 4?
I can't click the part 2, can anyone help
Where is the second part
Part 4?
For EG, I used your name lol🤣
Where is part 2?
how do you memorize parity
Remember the algorithm or whether you have it?
Part 2 isn't available 😢
My apologies, I had to reupload Part 2 but I forgot to change the link. The link in the description should be updated now!
I accidentally found that you can do S‘ (Tperm) S For the letter V
What a smart man
i tried this on my rubix and it didnt work!!! i think this is april fools joke guys watch out!!!
Good job with the April fools joke you just made
Bruh
Then you’re doing it wrong
I Hate the edges like O and S, the setup moves are so annoying
Good tutorial btw, im trying to learn 3BLD
oops i ended up solving it already lel
Part 4 please
Im so sad that daily puzzles is closing down 🫡😭😭😭😭😭😭