Check out the lock and lube and 3m work tunes headphones at the following links Lock and lube: amzn.to/3wLLuR5 Dewalt grease gun: amzn.to/3g5i7mO 3m Work Tunes amzn.to/3mHcGvB Thanks for watching and check out our other John Deere 2038R compact tractor videos at ruclips.net/video/G9ccCrIRsgY/видео.html And subscribe to our channel at ruclips.net/user/Rockhillfarmandhomes Buy me a coffee - www.buymeacoffee.com/rockhillfarm Thanks for watching
WLL ( working load limit )of a3/8” G-70 chain is 6600 lbs. . Two inch racket webbing 3333 lbs. WLL. Good idea placing stands under rear of trailer when loading .
@RockhillfarmYT I was rather surprised that you thought chains were weaker than straps but I think most people are just letting it slide to be polite. Pound for pound, or possibly dollar for dollar you are probably correct. But outside that fine line, the most commonly used binder chains are much stronger than your most common cargo strap, especially in size as metal is just stronger than threads. But I'm guessing you knew that,and were referring to the dollar for dollar, or pound for pound side of the argument. It just wasn't clearly stated as such so there's confusion.
@RambunctiousHamster this is an older video so I don’t remember exactly what I said, but I really doubt that I said straps were stronger than chains. I use chains on certain equipment and straps on certain equipment. I have a video on using chains and binders. Straps can be strong enough for a small tractor.
I appreciate your videos. And the time it takes. I could be missing something here. It looks like you have your tractor pretty far forward which would cause you to have excess tounge weight. I would think you would want your trailer back a little. Obviously you need some tounge weight. After commenting I started working, youtube autoplayed another video of yours where you adressed tounge weight.
Carpet reminents are good protection and cheap if you know a carpet installer that will give you his scraps. That's what I used when I hauled steel and glass on a flatbed.
I don’t know what you’re talking about. This is a really old video but that tractor has a listed weight of 2500 pounds without the loader. 3000 with the loader. I’ve had a ton of weight to it so it normally weighs between 4500 and 5000 pounds the way I have it set up
I am considering getting a trailer for my Deere. Thank you for all the tips & tricks about size, loading & tying down the tractor. Much appreciated Brock. Enjoy your day Sir
Thanks for another great video. As you said, different locations may have different regulations. It's imperative that you check local and state regulations. Chances are you won't be stopped unless you are doing something obviously wrong, but if you are stopped they generally go over everything with a fine tooth comb. I don't haul my tractor very often, so I use chains. Takes longer, but they require less attention. Both do the job well. Your time putting these videos together is greatly appreciated. Thanks again, Brock.
Ya the FB groups always get in a heated debate about this lol. I myself use both chains and straps its not that big of a deal to me and I know that my straps are way over rated lol.
I’ve been strapping things for years and I like these straps but I’ll use them for my riding mower but when tying down a tractor this size I would definitely use chains. Remember newbies that if you’re hauling this kind of weight your gonna need a brake controller and trailer brakes.
Go to your local fire department and see if they have any old fire hoses that you can get to run the straps inside of to prevent a sharp edge from cutting it.
Brock - I have been trailer shopping for my JD 1025R. The PJ T1 tilt trailer 16 ft caught my attention after chatting with the owner or another tilt trailer. Unloading mulch, topsoil, etc become so much easier. This is a single axle 7000# trailer designed for small equipment like a skid steer. They are uncommon since they cost more than the non-tilt. What do you think of them? For my application?
I can’t really give any kind of expert advice, but I do like the versatility of being able to pull your machine in the same trailer that you all your materials in. Dump trailers are fantastic. I’ve got a couple videos about Hauling a tractor in mine, which was dual 7000 pound axles. You just need to take measurements on length because you might be surprised how quickly you run out of room with one attachment
I probably have a dozen videos relating to that topic. Tow capacity, Payload, tongue way, GVW are. It’s a complicated topic I use WeighSafe gauges to know how much my tongue weight is. The problem is you can’t address everything in one video. The BIG Problem with 3/4 Ton Diesel Trucks - Tow Capacity Vs Payload ruclips.net/video/yNhMLd6MJsw/видео.html
Another important point is not that your truck can pull the weight, but can it STOP it?? Must have trailer brake control added to your truck if not already equipped with it. I need to add that to my truck when I buy a trailer for my tractor.
That’s a good point. The truck shown in the video did have a brake controller. I have since I upgraded to a Ram 2500 that also has the brake controller.
i'm going to be building a trailer in the next few weeks for hauling my tractor around ( yanmar ym330d) ... is there anything you would change to your set up ?
I ended up replacing this trailer with a gooseneck. This trailer has 3500 pound Axel’s for a total capacity of 7000 pounds. The trailer itself weighs 1800 so I can put 5200 pounds on it With the stump Grinder or Backhoe my tractor can weigh as much as 6000 pounds So, depending on what your tractor weighs, I might recommend higher rated Axels Otherwise I was happy with the design of the trailer
I may be wrong. But I think I may have commented on using the jacks stands on one of the first one of your videos I watched! So you got the idea from me! Maybe Lol
Brock good morning 63 here sun's out we wish had a trailer but our problem it may get used 3 or 4 times year love your explanations always helps understanding God Bless All PaK
Yeah, I think the majority of people just keep their tractor at their property most of the time but hopefully this is helpful for guys like me who moved a lot. Thanks for watching
I have used straps, trying chains now. I use protector for tie down straps | neoprene pad | 4-pack | protective sleeves for ratchet straps or tie downs with cam buckle that I purchased off of Amazon to protect my straps after having the same issue you did with one getting sliced.
I’m trying to make it as simple as possible and I feel like I’ve got a pretty simple method down that works the only thing I want to add is something To protect the straps
Straps are my choice as well. The die hard chain people will tell you different but the straps are designed for the job! Great explanation and video man
Check out the lock and lube and 3m work tunes headphones at the following links
Lock and lube:
amzn.to/3wLLuR5
Dewalt grease gun:
amzn.to/3g5i7mO
3m Work Tunes
amzn.to/3mHcGvB
Thanks for watching and check out our other John Deere 2038R compact tractor videos at ruclips.net/video/G9ccCrIRsgY/видео.html
And subscribe to our channel at ruclips.net/user/Rockhillfarmandhomes
Buy me a coffee - www.buymeacoffee.com/rockhillfarm
Thanks for watching
WLL ( working load limit )of a3/8” G-70 chain is 6600 lbs. . Two inch racket webbing 3333 lbs. WLL. Good idea placing stands under rear of trailer when loading .
💥 Oh oh, a controversial topic. Straps vs chains. I’ll be watching these comments. 😳
*Keep on tractoring!*
We are a couple hours in and I haven’t been called an idiot so I’d say off to a good start
@RockhillfarmYT
I was rather surprised that you thought chains were weaker than straps but I think most people are just letting it slide to be polite. Pound for pound, or possibly dollar for dollar you are probably correct. But outside that fine line, the most commonly used binder chains are much stronger than your most common cargo strap, especially in size as metal is just stronger than threads. But I'm guessing you knew that,and were referring to the dollar for dollar, or pound for pound side of the argument. It just wasn't clearly stated as such so there's confusion.
@RambunctiousHamster this is an older video so I don’t remember exactly what I said, but I really doubt that I said straps were stronger than chains.
I use chains on certain equipment and straps on certain equipment. I have a video on using chains and binders.
Straps can be strong enough for a small tractor.
You don't have to secure the JD. Just select the first gear, take the break and drive slowly 😂👍👍
Yeah, that John Deere doesn’t go anywhere it doesn’t want to.
I really just try the trailer to it so I don’t lose the trailer
I appreciate your videos. And the time it takes. I could be missing something here. It looks like you have your tractor pretty far forward which would cause you to have excess tounge weight. I would think you would want your trailer back a little. Obviously you need some tounge weight. After commenting I started working, youtube autoplayed another video of yours where you adressed tounge weight.
Carpet reminents are good protection and cheap if you know a carpet installer that will give you his scraps. That's what I used when I hauled steel and glass on a flatbed.
Not sure why I didn’t think of that. we buy carpet by the roll for our main business and have tons of leftover strips
I would sure like to make some ramps for my trailer like you have and how do you stow them? A RUclips?
There's no way that's 3000lbs with a bucket and a box blade. I bet it's 3300 without the box blade and loader. I'd bet money it's over 4000
I don’t know what you’re talking about. This is a really old video but that tractor has a listed weight of 2500 pounds without the loader. 3000 with the loader.
I’ve had a ton of weight to it so it normally weighs between 4500 and 5000 pounds the way I have it set up
Great video Brock. I am thinking about buying a trailer to transport my 2038R and straps are the way to go. Thanks for making this video.
Yeah, I’ve got a pretty smooth routine down with the straps
I am considering getting a trailer for my Deere. Thank you for all the tips & tricks about size, loading & tying down the tractor. Much appreciated Brock. Enjoy your day Sir
Thank you for watching
Thanks for another great video. As you said, different locations may have different regulations. It's imperative that you check local and state regulations. Chances are you won't be stopped unless you are doing something obviously wrong, but if you are stopped they generally go over everything with a fine tooth comb. I don't haul my tractor very often, so I use chains. Takes longer, but they require less attention. Both do the job well. Your time putting these videos together is greatly appreciated. Thanks again, Brock.
Thanks for watching and for commenting
For the average 30 hp or smaller tractor 🚜 a 16 foot trailer is plenty big. I use a 20 foot trailer for my 60 hp tractor with a backhoe
Ya the FB groups always get in a heated debate about this lol. I myself use both chains and straps its not that big of a deal to me and I know that my straps are way over rated lol.
I like simple, and this works for me.
Thanks for watching
Good choice Brock! Straps are the way to go!
I’ve been strapping things for years and I like these straps but I’ll use them for my riding mower but when tying down a tractor this size I would definitely use chains.
Remember newbies that if you’re hauling this kind of weight your gonna need a brake controller and trailer brakes.
Go to your local fire department and see if they have any old fire hoses that you can get to run the straps inside of to prevent a sharp edge from cutting it.
Chains for primary locations are my choice. Straps as backup.
great information dude. it is greatly appreciated.
Brock - I have been trailer shopping for my JD 1025R. The PJ T1 tilt trailer 16 ft caught my attention after chatting with the owner or another tilt trailer. Unloading mulch, topsoil, etc become so much easier. This is a single axle 7000# trailer designed for small equipment like a skid steer. They are uncommon since they cost more than the non-tilt. What do you think of them? For my application?
I can’t really give any kind of expert advice, but I do like the versatility of being able to pull your machine in the same trailer that you all your materials in.
Dump trailers are fantastic.
I’ve got a couple videos about Hauling a tractor in mine, which was dual 7000 pound axles.
You just need to take measurements on length because you might be surprised how quickly you run out of room with one attachment
You could address making sure the trailer is capable of carrying the weight of the equipment.
I probably have a dozen videos relating to that topic. Tow capacity, Payload, tongue way, GVW are. It’s a complicated topic
I use WeighSafe gauges to know how much my tongue weight is.
The problem is you can’t address everything in one video.
The BIG Problem with 3/4 Ton Diesel Trucks - Tow Capacity Vs Payload
ruclips.net/video/yNhMLd6MJsw/видео.html
Another important point is not that your truck can pull the weight, but can it STOP it?? Must have trailer brake control added to your truck if not already equipped with it. I need to add that to my truck when I buy a trailer for my tractor.
That’s a good point. The truck shown in the video did have a brake controller. I have since I upgraded to a Ram 2500 that also has the brake controller.
Flipping the back of your truck
I just purchased a 16 foot GN dump trailer…… plan to do a review on my channel as well……. Thanks for the strap explanation…… I will be using them too.
I’ve been running loads in the dump trailer all day today.
Such an amazing tool for getting work done.
Thanks for watching
@@RockhillfarmYT You are correct . . .
i'm going to be building a trailer in the next few weeks for hauling my tractor around ( yanmar ym330d) ... is there anything you would change to your set up ?
I ended up replacing this trailer with a gooseneck. This trailer has 3500 pound Axel’s for a total capacity of 7000 pounds. The trailer itself weighs 1800 so I can put 5200 pounds on it
With the stump Grinder or Backhoe my tractor can weigh as much as 6000 pounds
So, depending on what your tractor weighs, I might recommend higher rated Axels
Otherwise I was happy with the design of the trailer
I may be wrong. But I think I may have commented on using the jacks stands on one of the first one of your videos I watched! So you got the idea from me! Maybe Lol
Most of my good ideas come from viewers
How much does your load weigh
Brock good morning 63 here sun's out we wish had a trailer but our problem it may get used 3 or 4 times year love your explanations always helps understanding
God Bless All
PaK
Yeah, I think the majority of people just keep their tractor at their property most of the time but hopefully this is helpful for guys like me who moved a lot.
Thanks for watching
I have used straps, trying chains now. I use protector for tie down straps | neoprene pad | 4-pack | protective sleeves for ratchet straps or tie downs with cam buckle that I purchased off of Amazon to protect my straps after having the same issue you did with one getting sliced.
I’m trying to make it as simple as possible and I feel like I’ve got a pretty simple method down that works
the only thing I want to add is something To protect the straps
I use a chain in the back and straps on the front. I made a similar video about this.
I will check that out
@@RockhillfarmYT Thanks Brock.
What truck you using there
That’s the 2019 ram 1500 Limited I had before upgrading to a 2500
Straps are my choice as well. The die hard chain people will tell you different but the straps are designed for the job! Great explanation and video man
Yeah, as long as you don’t tighten them up against a sharp edge they have all the strength you need